The deformation process of H-beams was simulated by explicit dynamic FEM, and the influence of deformation parameters on the spread of rolling piece was obtained. The results show that the flange width, elongation rat...The deformation process of H-beams was simulated by explicit dynamic FEM, and the influence of deformation parameters on the spread of rolling piece was obtained. The results show that the flange width, elongation ratio between flange and web and flange thickness are the maior influencing factors on the spread of rolling piece, and the inclination and diameter of vertical roll together with web inner width can also influence to some extent on the spread of rolling piece.展开更多
A small, high performance X-band hybrid dielectric-iris-loaded travelling-wave linac with the length of 1.47 m and the maximum accelerating gradient of 45 MV/m has been designed. The beam energy of 33 MeV, the energy ...A small, high performance X-band hybrid dielectric-iris-loaded travelling-wave linac with the length of 1.47 m and the maximum accelerating gradient of 45 MV/m has been designed. The beam energy of 33 MeV, the energy spread of 0.5%, the beam emittance of about 5.7 πmm·mrad and the capture efficiency of 40% are reached by adjusting the sizes of the accelerating cavities and the phase velocity. The attenuation per unit length of structure, the shunt impedance Rs, the quality factor Q, the group velocity and the phase velocity are also presented.展开更多
为了适应 H 型钢轻型薄壁化的发展趋势,解决薄壁腹板 H 型钢轧制中存在的问题,采取将万能轧机立辊轴心向出口侧移动的轧制方法,取得了明显效果。本文主要讨论如何确定立辊轴心偏移量。该问题的解决对于万能轧机的设计和指导生产及提高 H...为了适应 H 型钢轻型薄壁化的发展趋势,解决薄壁腹板 H 型钢轧制中存在的问题,采取将万能轧机立辊轴心向出口侧移动的轧制方法,取得了明显效果。本文主要讨论如何确定立辊轴心偏移量。该问题的解决对于万能轧机的设计和指导生产及提高 H 型钢产品质量具有十分重要的意义。展开更多
SFRFQ （Separated Function Radio Frequency Quadrupoles） accelerator is a new post accelerator of RFQ （Radio Frequency Quadrupoles） type, which has been developed since the beginning of the 1990s at Peking Universit...SFRFQ （Separated Function Radio Frequency Quadrupoles） accelerator is a new post accelerator of RFQ （Radio Frequency Quadrupoles） type, which has been developed since the beginning of the 1990s at Peking University. In order to demonstrate the possibility of the SFRFQ, a prototype cavity has been designed. A special dynamics design method has been proposed to avoid the sparking problem and decrease the energy spread at the exit of SFRFQ. It consists of two aspects： the asymmetry structure design for transverse focusing and the inner buncher design for longitudinal bunching. This allows the improvement of the beam properties without increasing the cavity length. The simulation results show that the energy spread can be substantially reduced by using the inner buncher in the SFRFQ structure.展开更多
文摘The deformation process of H-beams was simulated by explicit dynamic FEM, and the influence of deformation parameters on the spread of rolling piece was obtained. The results show that the flange width, elongation ratio between flange and web and flange thickness are the maior influencing factors on the spread of rolling piece, and the inclination and diameter of vertical roll together with web inner width can also influence to some extent on the spread of rolling piece.
基金The Natural Science Basic Research Plan in Shaanxi Province of China(Program No.2012JM8008)Scientific Research Program Funded by Shaanxi Provincial Education Department(No.14JK1350)
基金Supported by National Natural Science Foundation of China (10375060, 10375061, 10675116)
文摘A small, high performance X-band hybrid dielectric-iris-loaded travelling-wave linac with the length of 1.47 m and the maximum accelerating gradient of 45 MV/m has been designed. The beam energy of 33 MeV, the energy spread of 0.5%, the beam emittance of about 5.7 πmm·mrad and the capture efficiency of 40% are reached by adjusting the sizes of the accelerating cavities and the phase velocity. The attenuation per unit length of structure, the shunt impedance Rs, the quality factor Q, the group velocity and the phase velocity are also presented.
基金Supported by National Natural Science Foundation of China (10455001)China Postdoctoral Science Foundation
文摘SFRFQ （Separated Function Radio Frequency Quadrupoles） accelerator is a new post accelerator of RFQ （Radio Frequency Quadrupoles） type, which has been developed since the beginning of the 1990s at Peking University. In order to demonstrate the possibility of the SFRFQ, a prototype cavity has been designed. A special dynamics design method has been proposed to avoid the sparking problem and decrease the energy spread at the exit of SFRFQ. It consists of two aspects： the asymmetry structure design for transverse focusing and the inner buncher design for longitudinal bunching. This allows the improvement of the beam properties without increasing the cavity length. The simulation results show that the energy spread can be substantially reduced by using the inner buncher in the SFRFQ structure.
