A new method was used to analyze the factors affecting the precipitation of reversed austenite during tempering. The samples were kept at various tempering temperatures for 10 min and their length changes were recorde...A new method was used to analyze the factors affecting the precipitation of reversed austenite during tempering. The samples were kept at various tempering temperatures for 10 min and their length changes were recorded. Then, the precipitation of reversed austenite which led to the length reduction was shown by thermal expansion curves. The results show that the effects of process parameters on the precipitation of reversed austenite can be determined more accurately by this method than by X-ray diffraction. When the quenching and tempering process is adopted, both the lower quenching temperature and higher tempering temperature can promote the precipitation of reversed austenite during tempering; and when the quenching, lamellarizing, and tempering process is used, intercritical quenching is considered beneficial to the precipitation of reversed austenite in the subsequent tempering because of Ni segregation during holding at the intercritical temperature.展开更多
In order to investigate the effect of microstructural characterization on the mechanical properties and retained austenite stability, a different type of quenching and partitioning steel（I-Q＆P） through intercritica...In order to investigate the effect of microstructural characterization on the mechanical properties and retained austenite stability, a different type of quenching and partitioning steel（I-Q＆P） through intercritical annealing before the quenching and partitioning process was designed, which can realize lamellar intercritical microstructure compared to the conventional quenching and partitioning（Q＆P） process. The morphology of ferrite and martensite/retained austenite is lamellar in the I-Q＆P steel while it is equiaxed after being heat-treated by conventional Q＆P process. The I-Q＆P steel is proved to have better formability and mechanical properties than conventional Q＆P steel, which is due to the highervolume fraction of retained austenite in the I-Q＆P steel and confirmed by electron backscattering diffraction patterns and X-ray diffraction. Furthermore, the stability of retained austenite in I-Q＆P steel is also higher than that in conventional Q＆P steel, which is investigated by tensile tests and differential scanning calorimetry.展开更多
文摘A new method was used to analyze the factors affecting the precipitation of reversed austenite during tempering. The samples were kept at various tempering temperatures for 10 min and their length changes were recorded. Then, the precipitation of reversed austenite which led to the length reduction was shown by thermal expansion curves. The results show that the effects of process parameters on the precipitation of reversed austenite can be determined more accurately by this method than by X-ray diffraction. When the quenching and tempering process is adopted, both the lower quenching temperature and higher tempering temperature can promote the precipitation of reversed austenite during tempering; and when the quenching, lamellarizing, and tempering process is used, intercritical quenching is considered beneficial to the precipitation of reversed austenite in the subsequent tempering because of Ni segregation during holding at the intercritical temperature.
文摘In order to investigate the effect of microstructural characterization on the mechanical properties and retained austenite stability, a different type of quenching and partitioning steel（I-Q＆P） through intercritical annealing before the quenching and partitioning process was designed, which can realize lamellar intercritical microstructure compared to the conventional quenching and partitioning（Q＆P） process. The morphology of ferrite and martensite/retained austenite is lamellar in the I-Q＆P steel while it is equiaxed after being heat-treated by conventional Q＆P process. The I-Q＆P steel is proved to have better formability and mechanical properties than conventional Q＆P steel, which is due to the highervolume fraction of retained austenite in the I-Q＆P steel and confirmed by electron backscattering diffraction patterns and X-ray diffraction. Furthermore, the stability of retained austenite in I-Q＆P steel is also higher than that in conventional Q＆P steel, which is investigated by tensile tests and differential scanning calorimetry.
