Precipitates,including silicides and Ti3 Al(α2)phase,and alloying elements distribution in a near a titanium alloy Ti65(Ti-5.8 Al-4.0 Sn-3.5 Zr-0.5 Mo-0.3 Nb-1.0 Ta-0.4 Si-0.8 W-0.05 C)after solution treatment and ag...Precipitates,including silicides and Ti3 Al(α2)phase,and alloying elements distribution in a near a titanium alloy Ti65(Ti-5.8 Al-4.0 Sn-3.5 Zr-0.5 Mo-0.3 Nb-1.0 Ta-0.4 Si-0.8 W-0.05 C)after solution treatment and aging process were characterized by using transmission electron microscopy(TEM)and atom probe tomography(APT).Quantitative composition analysis and TEM observation indicate that the silicides fit to(Ti,Zr)6(Sl,Sn)3.Zr exhibits aβ-stabilizing effect in near a titanium alloys but is weaker than otherβstabilizing elements.The enriching tendency of the alloying elements in the retainedβphase is in the order of Zr<Nb<Ta<Mo<W.The experimental results are rationalized by the relative stability of alloying elements in the a andβphases and the mobility of these atoms in the matrix.An enrichment of Si in theα2 phase over theαmatrix phase is noticed,which is attributed to the lower formation energy of Si in theα2 phase.展开更多
Atom probe tomography was utilized to investigate Cu precipitation in a high-strength low-alloy steel isothermally aged at 500℃ for 1, 4, 16, and 64 h after water-quenching from 900℃. With prolonged aging time, the ...Atom probe tomography was utilized to investigate Cu precipitation in a high-strength low-alloy steel isothermally aged at 500℃ for 1, 4, 16, and 64 h after water-quenching from 900℃. With prolonged aging time, the Curich precipitates（CRPs） increased in size and decreased in number density, and gradually evolved from spheroidal to elliptical in morphology. The small CRPs were rich in a high amount of Fe and a certain amount of Ni and Mn at their early nucleation stage. The large CRPs with increased size due to extensive aging contained less Fe and more Cu at their later growth stage. Additionally, Ni and Mn were both readily to segregate at the CRP/matrix heterophase interfaces, and Mn was higher in content than Ni in the precipitate interior especially when the CRPs were large in size.展开更多
Corrosion resistance behavior of Co-containing maraging stainless steels was investigated. Neutral salt spray and polarization test showed that maraging stainless steel with high Co content showed poor corrosion behav...Corrosion resistance behavior of Co-containing maraging stainless steels was investigated. Neutral salt spray and polarization test showed that maraging stainless steel with high Co content showed poor corrosion behavior. Microstructure observation proved that segregation of Cr in the matrix deteriorated its corrosion resistance. The surface morphology of the aged maraging stainless steel with high Co content indicated that during passivation process, the newly formed passive film with sinusoidal distribution readily destroyed by the corrosive medium, hence, causing poor corrosion resistance. Moreover, through first-principles calculation it was proved that Co increased Fe–Fe ferromagnetic interaction which facilitated the formation Cr-rich clusters.展开更多
Redistribution of elements may take place in alloys during severe plastic deformation, which significantly alters the mechanical properties of the alloys. Therefore, comprehensive knowledge about deformationinduced re...Redistribution of elements may take place in alloys during severe plastic deformation, which significantly alters the mechanical properties of the alloys. Therefore, comprehensive knowledge about deformationinduced redistribution of elements has to be established. In the present paper, the distribution of Mg in an Al-Mg alloy processed by high pressure torsion was examined using atom probe tomography(APT).With crystallographic information extracted by APT data analysis, this research reveals that the movement of dislocations plays an important role in the formation of Mg-depletion zones in the deformed microstructure.展开更多
基金The authors acknowledge the helpful suggestions from Prof.Shangzhou Zhang and Dr.Yujing Liu.And TEM experimental assistance is kindly provided by Jiao Liu.
文摘Precipitates,including silicides and Ti3 Al(α2)phase,and alloying elements distribution in a near a titanium alloy Ti65(Ti-5.8 Al-4.0 Sn-3.5 Zr-0.5 Mo-0.3 Nb-1.0 Ta-0.4 Si-0.8 W-0.05 C)after solution treatment and aging process were characterized by using transmission electron microscopy(TEM)and atom probe tomography(APT).Quantitative composition analysis and TEM observation indicate that the silicides fit to(Ti,Zr)6(Sl,Sn)3.Zr exhibits aβ-stabilizing effect in near a titanium alloys but is weaker than otherβstabilizing elements.The enriching tendency of the alloying elements in the retainedβphase is in the order of Zr<Nb<Ta<Mo<W.The experimental results are rationalized by the relative stability of alloying elements in the a andβphases and the mobility of these atoms in the matrix.An enrichment of Si in theα2 phase over theαmatrix phase is noticed,which is attributed to the lower formation energy of Si in theα2 phase.
文摘Atom probe tomography was utilized to investigate Cu precipitation in a high-strength low-alloy steel isothermally aged at 500℃ for 1, 4, 16, and 64 h after water-quenching from 900℃. With prolonged aging time, the Curich precipitates（CRPs） increased in size and decreased in number density, and gradually evolved from spheroidal to elliptical in morphology. The small CRPs were rich in a high amount of Fe and a certain amount of Ni and Mn at their early nucleation stage. The large CRPs with increased size due to extensive aging contained less Fe and more Cu at their later growth stage. Additionally, Ni and Mn were both readily to segregate at the CRP/matrix heterophase interfaces, and Mn was higher in content than Ni in the precipitate interior especially when the CRPs were large in size.
基金sponsored by the Youth Innovation Promotion Association of Chinese Academy of Sciences (No. 2017233)the Innovation Project of Institute of Metal Research (No. 2015-ZD04)
文摘Corrosion resistance behavior of Co-containing maraging stainless steels was investigated. Neutral salt spray and polarization test showed that maraging stainless steel with high Co content showed poor corrosion behavior. Microstructure observation proved that segregation of Cr in the matrix deteriorated its corrosion resistance. The surface morphology of the aged maraging stainless steel with high Co content indicated that during passivation process, the newly formed passive film with sinusoidal distribution readily destroyed by the corrosive medium, hence, causing poor corrosion resistance. Moreover, through first-principles calculation it was proved that Co increased Fe–Fe ferromagnetic interaction which facilitated the formation Cr-rich clusters.
基金funded by the financial support of the National Natural Science Foundation of China (No. 51571120)the support and the assistance of the Material Characterization and Research Center of Nanjing University of Science and Technology
文摘Redistribution of elements may take place in alloys during severe plastic deformation, which significantly alters the mechanical properties of the alloys. Therefore, comprehensive knowledge about deformationinduced redistribution of elements has to be established. In the present paper, the distribution of Mg in an Al-Mg alloy processed by high pressure torsion was examined using atom probe tomography(APT).With crystallographic information extracted by APT data analysis, this research reveals that the movement of dislocations plays an important role in the formation of Mg-depletion zones in the deformed microstructure.
