In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in ...In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.展开更多
We present an antenna-in-package system integrated with a meander line antenna based on low temperature co-fired ceramic(LTCC) technology. The proposed system employs a meander line patch antenna, a packaging layer, a...We present an antenna-in-package system integrated with a meander line antenna based on low temperature co-fired ceramic(LTCC) technology. The proposed system employs a meander line patch antenna, a packaging layer, and a laminated multi-chip module(MCM) for integration of integrated circuit(IC) bare chips.A microstrip feed line is used to reduce the interaction between patch and package. To decrease electromagnetic coupling, a via hole structure is designed and analyzed. The meander line antenna achieved a bandwidth of 220 MHz with the center frequency at 2.4 GHz, a maximum gain of 2.2 d B, and a radiation efficiency about 90% over its operational frequency. The whole system, with a small size of 20.2 mm×6.1 mm×2.6 mm, can be easily realized by a standard LTCC process. This antenna-in-package system integrated with a meander line antenna was fabricated and the experimental results agreed with simulations well.展开更多
文摘In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.
基金supported by the National Natural Science Foundation of China(Nos.61574106 and 61334003)the National Defense Pre-research Foundation of China(No.9140A23060115DZ01062)the Key Science and Technology Special Pro ject of Shaanxi Province,China(No.2015KTCQ01-5)
文摘We present an antenna-in-package system integrated with a meander line antenna based on low temperature co-fired ceramic(LTCC) technology. The proposed system employs a meander line patch antenna, a packaging layer, and a laminated multi-chip module(MCM) for integration of integrated circuit(IC) bare chips.A microstrip feed line is used to reduce the interaction between patch and package. To decrease electromagnetic coupling, a via hole structure is designed and analyzed. The meander line antenna achieved a bandwidth of 220 MHz with the center frequency at 2.4 GHz, a maximum gain of 2.2 d B, and a radiation efficiency about 90% over its operational frequency. The whole system, with a small size of 20.2 mm×6.1 mm×2.6 mm, can be easily realized by a standard LTCC process. This antenna-in-package system integrated with a meander line antenna was fabricated and the experimental results agreed with simulations well.
