An asymptotic perturbation method is presented based on the Fourier expansion and temporal rescaling to investigate the nonlinear oscillations and chaotic dynamics of a simply supported angle-ply composite laminated r...An asymptotic perturbation method is presented based on the Fourier expansion and temporal rescaling to investigate the nonlinear oscillations and chaotic dynamics of a simply supported angle-ply composite laminated rectangular thin plate with parametric and external excitations.According to the Reddy's third-order plate theory,the governing equations of motion for the angle-ply composite laminated rectangular thin plate are derived by using the Hamilton's principle.Then,the Galerkin procedure is applied to the partial differential governing equation to obtain a two-degrees-of-freedom nonlinear system including the quadratic and cubic nonlinear terms.Such equations are utilized to deal with the resonant case of 1:1 internal resonance and primary parametric resonance-1/2 subharmonic resonance.Furthermore,the stability analysis is given for the steady-state solutions of the averaged equation.Based on the averaged equation obtained by the asymptotic perturbation method,the phase portrait and power spectrum are used to analyze the multi-pulse chaotic motions of the angle-ply composite laminated rectangular thin plate.Under certain conditions the various chaotic motions of the angle-ply composite laminated rectangular thin plate are found.展开更多
The influence of fiber orientation,flow yaw angle and length-to-thickness ratio on flutter characteristics of angle-ply laminated plates in supersonic flow is studied by finite element approach.The structural model is...The influence of fiber orientation,flow yaw angle and length-to-thickness ratio on flutter characteristics of angle-ply laminated plates in supersonic flow is studied by finite element approach.The structural model is established using the Reissner-Mindlin theory in which the transverse shear deformation is considered.The aerodynamic pressure is evaluated by the quasi-steady first-order piston theory.The equations of motion are formulated based on the principle of virtual work.With the harmonic motion assumption,the flutter boundary is determined by solving a series of complex eigenvalue problems.Numerical study shows that （1） The flutter dynamic pressure and the coalescence of flutter modes depend on fiber orientation,flow yaw angle and length-to-thickness ratio;（2） The laminated plate with all fibers aligned with the flow direction gives the highest flutter dynamic pressure,but a slight yawing of the flow from the fiber orientation results in a sharp decrease of the flutter dynamic pressure;（3） The angle-ply laminated plate with fiber orientation angle equal to flow yaw angle gives high flutter dynamic pressure,but not the maximum flutter dynamic pressure;（4） With the decrease of length-to-thickness ratio,an adverse effect due to mode transition on the flutter dynamic pressure is found.展开更多
From the mixed variational principle, by the selection of the state variables and its dual variables, the Hamiltonian canonical equation for the dynamic analysis of shear deformable antisymmetric angle-ply laminated p...From the mixed variational principle, by the selection of the state variables and its dual variables, the Hamiltonian canonical equation for the dynamic analysis of shear deformable antisymmetric angle-ply laminated plates is derived, leading to the mathematical frame of symplectic geometry and algorithms, and the exact solution for the arbitrary boundary conditions is also derived by the adjoint orthonormalized symplectic expansion method. Numerical results are presented with the emphasis on the effects of length/thickness ratio, arbitrary boundary conditions, degrees of anisotropy, number of layers, ply-angles and the corrected coefficients of transverse shear.展开更多
Semi-analytical elasticity solutions for bending of angle-ply laminates in cylindrical bending are presented using the state-space-based differential quadrature method (SSDQM). Partial differential state equation is d...Semi-analytical elasticity solutions for bending of angle-ply laminates in cylindrical bending are presented using the state-space-based differential quadrature method (SSDQM). Partial differential state equation is derived from the basic equations of elasticity based on the state space concept. Then, the differential quadrature (DQ) technique is introduced to discretize the longitu- dinal domain of the plate so that a series of ordinary differential state equations are obtained at the discrete points. Meanwhile, the edge constrained conditions are handled directly using the stress and displacement components without the Saint-Venant principle. The thickness domain is solved analytically based on the state space formalism along with the continuity conditions at interfaces. The present method is validated by comparing the results to the exact solutions of Pagano’s problem. Numerical results for fully clamped thick laminates are presented, and the influences of ply angle on stress distributions are discussed.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos.10732020,10872010)the National Science Fund for Distinguished Young Scholars (Grant No.10425209)
文摘An asymptotic perturbation method is presented based on the Fourier expansion and temporal rescaling to investigate the nonlinear oscillations and chaotic dynamics of a simply supported angle-ply composite laminated rectangular thin plate with parametric and external excitations.According to the Reddy's third-order plate theory,the governing equations of motion for the angle-ply composite laminated rectangular thin plate are derived by using the Hamilton's principle.Then,the Galerkin procedure is applied to the partial differential governing equation to obtain a two-degrees-of-freedom nonlinear system including the quadratic and cubic nonlinear terms.Such equations are utilized to deal with the resonant case of 1:1 internal resonance and primary parametric resonance-1/2 subharmonic resonance.Furthermore,the stability analysis is given for the steady-state solutions of the averaged equation.Based on the averaged equation obtained by the asymptotic perturbation method,the phase portrait and power spectrum are used to analyze the multi-pulse chaotic motions of the angle-ply composite laminated rectangular thin plate.Under certain conditions the various chaotic motions of the angle-ply composite laminated rectangular thin plate are found.
基金supported by China Postdoctoral Science Founda-tion (20090451045)
文摘The influence of fiber orientation,flow yaw angle and length-to-thickness ratio on flutter characteristics of angle-ply laminated plates in supersonic flow is studied by finite element approach.The structural model is established using the Reissner-Mindlin theory in which the transverse shear deformation is considered.The aerodynamic pressure is evaluated by the quasi-steady first-order piston theory.The equations of motion are formulated based on the principle of virtual work.With the harmonic motion assumption,the flutter boundary is determined by solving a series of complex eigenvalue problems.Numerical study shows that （1） The flutter dynamic pressure and the coalescence of flutter modes depend on fiber orientation,flow yaw angle and length-to-thickness ratio;（2） The laminated plate with all fibers aligned with the flow direction gives the highest flutter dynamic pressure,but a slight yawing of the flow from the fiber orientation results in a sharp decrease of the flutter dynamic pressure;（3） The angle-ply laminated plate with fiber orientation angle equal to flow yaw angle gives high flutter dynamic pressure,but not the maximum flutter dynamic pressure;（4） With the decrease of length-to-thickness ratio,an adverse effect due to mode transition on the flutter dynamic pressure is found.
文摘From the mixed variational principle, by the selection of the state variables and its dual variables, the Hamiltonian canonical equation for the dynamic analysis of shear deformable antisymmetric angle-ply laminated plates is derived, leading to the mathematical frame of symplectic geometry and algorithms, and the exact solution for the arbitrary boundary conditions is also derived by the adjoint orthonormalized symplectic expansion method. Numerical results are presented with the emphasis on the effects of length/thickness ratio, arbitrary boundary conditions, degrees of anisotropy, number of layers, ply-angles and the corrected coefficients of transverse shear.
基金Project supported by the National Natural Science Foundation of China (No. 10432030)the China Postdoctoral Science Foundation (No. 20060401071)the Program for New Century Excellent Talent in University of China (No. NCET-05-0510)
文摘Semi-analytical elasticity solutions for bending of angle-ply laminates in cylindrical bending are presented using the state-space-based differential quadrature method (SSDQM). Partial differential state equation is derived from the basic equations of elasticity based on the state space concept. Then, the differential quadrature (DQ) technique is introduced to discretize the longitu- dinal domain of the plate so that a series of ordinary differential state equations are obtained at the discrete points. Meanwhile, the edge constrained conditions are handled directly using the stress and displacement components without the Saint-Venant principle. The thickness domain is solved analytically based on the state space formalism along with the continuity conditions at interfaces. The present method is validated by comparing the results to the exact solutions of Pagano’s problem. Numerical results for fully clamped thick laminates are presented, and the influences of ply angle on stress distributions are discussed.
