Chrome-doped titanium oxide films were prepared by reactive magnetron sputtering method. The films deposited on glass slides at room temperature were investigated by atom force microscope, X-ray diffractometer, X-ray ...Chrome-doped titanium oxide films were prepared by reactive magnetron sputtering method. The films deposited on glass slides at room temperature were investigated by atom force microscope, X-ray diffractometer, X-ray photoelectron spectroscopy, UV-Vis spectrophotometer, the photoluminescence （PL） and ellipse polarization apparatus. The results indicate that TiO2-Cr film exists in the form of amorphous. The prepared films possess a band gap of less than 3.20 eV, and a new absorption peak. The films, irradiated for 5 h under UV light, exhibit excellent photocatalytic activities with the optimum decomposition rate at 98.5% for methylene blue. Consequently, the thickness threshold on these films is 114 nm, at which the rate of photodegradation is 95% in 5 h. When the thickness is over 114 nm, the rate of photodegradation becomes stable. This result is completely different from that of crystalloid TiO2 thin film.展开更多
TiO2-W films were deposited on the slides by reactive magnetron sputtering. Properties of the films were analyzed via AFM, XRD, XPS, STS, UV-Vis and ellipse polarization apparatus. The results show that TiO2-W films a...TiO2-W films were deposited on the slides by reactive magnetron sputtering. Properties of the films were analyzed via AFM, XRD, XPS, STS, UV-Vis and ellipse polarization apparatus. The results show that TiO2-W films are amorphous. The AFM map reveals that the surface of the film is tough and porous. The experiments of decomposing methylene blue indicate that the thickness threshold on these films is 141 nm, at which the rate of photodegradation is 90% in 2 h. And when the thickness is over 141 nm, the rate of photodegradation does not increase any more. This result is completely different from that of crystalloid TiO2 thin film.展开更多
By using the bimodal mesoporous silica(BMMS) as the carrier and butyl titanate as the titanium source, the TiO_2/BMMS catalyst was prepared. The samples were characterized by XRD, XRF, N_2 adsorption and desorption, F...By using the bimodal mesoporous silica(BMMS) as the carrier and butyl titanate as the titanium source, the TiO_2/BMMS catalyst was prepared. The samples were characterized by XRD, XRF, N_2 adsorption and desorption, FTIR, UVvis,SEM, EDS, and TEM techniques. The test results showed that TiO_2 was amorphous, the TiO_2/BMMS catalyst had an ordered bimodal mesoporous structure, and the chemical interaction existed between BMMS and TiO_2. Since the TiO_2/BMMS had a lower band gap, its photocatalytic activity was better than TiO_2. Under UV irradiation a one-pot PODS system was set up, using TiO_2/BMMS as the catalyst, H_2O_2 as the oxidant, and methanol as the solvent. The TiO_2/BMMS catalyst showed better photocatalytic activity than the mono-modal mesoporous TiO_2/SBA-15 catalyst, and the desulfurization rate of dibenzothiophene(DBT) over TiO_2/BMMS catalyst could reach 99._2%. The TiO_2/BMMS catalyst also had so good stability that the desulfurization rate of DBT did not drop apparently after 8 cycles of reusing, and could still be close to 90%.展开更多
Supported ionic liquid(IL) catalysts [Cmim]PMoO/Am TiO(amorphous TiO) were synthesized through a one-step method for extraction coupled catalytic oxidative desulfurization(ECODS) system. Characterizations such as FTIR...Supported ionic liquid(IL) catalysts [Cmim]PMoO/Am TiO(amorphous TiO) were synthesized through a one-step method for extraction coupled catalytic oxidative desulfurization(ECODS) system. Characterizations such as FTIR, DRS,wide-angle XRD, Nadsorption–desorption and XPS were applied to analyze the morphology and Keggin structure of the catalysts. In ECODS with hydrogen peroxide as the oxidant, it was found that ILs with longer alkyl chains in the cationic moiety had a better effect on the removal of dibenzothiophene. The desulfurization could reach 100% under optimal conditions, and GC–MS analysis was employed to detect the oxidized product after the reaction. Factors affecting the desulfurization efficiencies were discussed, and a possible mechanism was proposed. In addition, cyclic experiments were also conducted to investigate the recyclability of the supported catalyst. The catalytic activity of [Cmim]PMoO/Am TiOonly dropped from 100% to 92.9% after ten cycles, demonstrating the good recycling performance of the catalyst and its potential industrial application.展开更多
文摘Chrome-doped titanium oxide films were prepared by reactive magnetron sputtering method. The films deposited on glass slides at room temperature were investigated by atom force microscope, X-ray diffractometer, X-ray photoelectron spectroscopy, UV-Vis spectrophotometer, the photoluminescence （PL） and ellipse polarization apparatus. The results indicate that TiO2-Cr film exists in the form of amorphous. The prepared films possess a band gap of less than 3.20 eV, and a new absorption peak. The films, irradiated for 5 h under UV light, exhibit excellent photocatalytic activities with the optimum decomposition rate at 98.5% for methylene blue. Consequently, the thickness threshold on these films is 114 nm, at which the rate of photodegradation is 95% in 5 h. When the thickness is over 114 nm, the rate of photodegradation becomes stable. This result is completely different from that of crystalloid TiO2 thin film.
基金Projects supported by the Innovative Experiment Projects of New Building Materials Key Laboratory of Chonging University
文摘TiO2-W films were deposited on the slides by reactive magnetron sputtering. Properties of the films were analyzed via AFM, XRD, XPS, STS, UV-Vis and ellipse polarization apparatus. The results show that TiO2-W films are amorphous. The AFM map reveals that the surface of the film is tough and porous. The experiments of decomposing methylene blue indicate that the thickness threshold on these films is 141 nm, at which the rate of photodegradation is 90% in 2 h. And when the thickness is over 141 nm, the rate of photodegradation does not increase any more. This result is completely different from that of crystalloid TiO2 thin film.
基金financially supported by the Program for Liaoning Excellent Talents in University,abbreviated as“LNET”(LJQ2015062)Program for Science and Technology Agency of Liaoning Province(20170540585)+1 种基金General Scientific Research Project of Liaoning Provincial Department of Education(L2015296,L2016018)Science and Technology Planning project of Fushun(FSKJHT201376)
文摘By using the bimodal mesoporous silica(BMMS) as the carrier and butyl titanate as the titanium source, the TiO_2/BMMS catalyst was prepared. The samples were characterized by XRD, XRF, N_2 adsorption and desorption, FTIR, UVvis,SEM, EDS, and TEM techniques. The test results showed that TiO_2 was amorphous, the TiO_2/BMMS catalyst had an ordered bimodal mesoporous structure, and the chemical interaction existed between BMMS and TiO_2. Since the TiO_2/BMMS had a lower band gap, its photocatalytic activity was better than TiO_2. Under UV irradiation a one-pot PODS system was set up, using TiO_2/BMMS as the catalyst, H_2O_2 as the oxidant, and methanol as the solvent. The TiO_2/BMMS catalyst showed better photocatalytic activity than the mono-modal mesoporous TiO_2/SBA-15 catalyst, and the desulfurization rate of dibenzothiophene(DBT) over TiO_2/BMMS catalyst could reach 99._2%. The TiO_2/BMMS catalyst also had so good stability that the desulfurization rate of DBT did not drop apparently after 8 cycles of reusing, and could still be close to 90%.
基金financially supported by the National Natural Science Foundation of China (Nos. 21576122, 21646001, 21506080)Natural Science Foundation of Jiangsu Province (Nos. BK20150485, BK20170528)+2 种基金China Postdoctoral Science Foundation (2017M611727)Jiangsu Planned Projects for Postdoctoral Research Funds (1701104B)supported by the Student Innovation and Entrepreneurship Training Program (201810299332 W)
文摘Supported ionic liquid(IL) catalysts [Cmim]PMoO/Am TiO(amorphous TiO) were synthesized through a one-step method for extraction coupled catalytic oxidative desulfurization(ECODS) system. Characterizations such as FTIR, DRS,wide-angle XRD, Nadsorption–desorption and XPS were applied to analyze the morphology and Keggin structure of the catalysts. In ECODS with hydrogen peroxide as the oxidant, it was found that ILs with longer alkyl chains in the cationic moiety had a better effect on the removal of dibenzothiophene. The desulfurization could reach 100% under optimal conditions, and GC–MS analysis was employed to detect the oxidized product after the reaction. Factors affecting the desulfurization efficiencies were discussed, and a possible mechanism was proposed. In addition, cyclic experiments were also conducted to investigate the recyclability of the supported catalyst. The catalytic activity of [Cmim]PMoO/Am TiOonly dropped from 100% to 92.9% after ten cycles, demonstrating the good recycling performance of the catalyst and its potential industrial application.
