In order to remove efficiently haled-particles emissions from coal combustions, a new way was used to put forward the process of agglomeration and the atomization was produced by the nozzle and then sprayed into the ...In order to remove efficiently haled-particles emissions from coal combustions, a new way was used to put forward the process of agglomeration and the atomization was produced by the nozzle and then sprayed into the flue before precipitation devices of power station boiler in order to make inhaled-particles agglomerate into bigger particles, which can be easily removed but not change existing running conditions of boiler. According to this idea, a model is set up to study agglomeration rate and effect forces between fly ash inhaled-particles and atomized agglomerator particles. The developed agglomeration rate was expressed by relative particle number decreasing speed per unit volume. The result showed that viscosity force and flow resistance force give main influences on agglomeration effect of inhaled-particles, while springiness force and gravity have little effect on agglomeration effect of theirs. Factors influencing the agglomeration rate and effect forces are studied, including agglomerator concentration, agglomerator flux and agglomerator density, atomized-particles diameters and inhaled-particles diameter and so on.展开更多
A joint international effort to improve solid propellant performance within the framework of a FP7European Project was described.Several metallized solid rocket propellants,of the broad family AP/HTPB/Metal in the rat...A joint international effort to improve solid propellant performance within the framework of a FP7European Project was described.Several metallized solid rocket propellants,of the broad family AP/HTPB/Metal in the ratio 68/14/18,were experimentally analyzed seeking to optimize the delivered specific impulse by identifying the most suitable high-energy fuel.Keeping the same nominal composition,different metallic fuels(including micrometric and nanometric Al,AlH3,and a variety of dual metal compositions)were characterized,tested,and contrasted to a conventional micrometric aluminum(30μm average grain size)certified for space flights.In order to overcome the intrinsic performance limitations of the matrix AP/HTPB,a new matrix consisting of ADN/GAP satisfying also the need for environmentally benign propellant formulation was considered as well.A comparative analysis between the two solid propellant systems in terms of ideal thermochemistry and experimental combustion properties reveals advantages and disadvantages of both.Overall,it is judged worthwhile to develop ADN/GAP propellants,with or without metallic fuels,to enhance the current status of solid rocket propulsion.Controlling morphology and mechanical properties of ADN/GAP compositions and understanding their flame structure and aggregation/agglomeration properties are the main issues still challenging industrial users.展开更多
Several metallized solid rocket propellants,AP/Metal/HTPB in the ratio 68/18/14,were experimentally analyzed at the Space Propulsion Laboratory of Politecnico di Milano.Effects of the metals(micrometric and nanometric...Several metallized solid rocket propellants,AP/Metal/HTPB in the ratio 68/18/14,were experimentally analyzed at the Space Propulsion Laboratory of Politecnico di Milano.Effects of the metals(micrometric and nanometric Al,B,Mg,and a variety of dual metals) on the performance of the propellant were studied and contrasted to a conventional micrometric aluminum(30 μm average grain size) taken as reference.It is shown that the propellant microstructure plays a fundamental role in controlling the critical aggregation/agglomeration phenomena occurring below and near the burning surface.Two specific effects of microstructure in terms of steady burning rate and average agglomerate size are illustrated.展开更多
5-（Difluoromethoxy）-2-mercapto- 1H-benzimi- dazole （DMB） was precipitated by adding acetic acid to the DMB sodium salt solution. The spherical agglomeration of DMB during the reactive crystallization in a batch cr...5-（Difluoromethoxy）-2-mercapto- 1H-benzimi- dazole （DMB） was precipitated by adding acetic acid to the DMB sodium salt solution. The spherical agglomeration of DMB during the reactive crystallization in a batch crystallizer was monitored by real-time Particle Video Microscope （PVM）. We found that the low feeding rate of acetic acid, high crystallization temperature, low agitation rate or adding seed crystal can facilitate the formation of spherical agglomerates. By using a simple model, the mean crystal agglomerate size of DMB thus predicted is generally in agreement with the experimental data. In addition, the crystallization process of DMB was optimized by a new control strategy of supersaturation to avoid disadvantages brought by agglomeration.展开更多
文摘In order to remove efficiently haled-particles emissions from coal combustions, a new way was used to put forward the process of agglomeration and the atomization was produced by the nozzle and then sprayed into the flue before precipitation devices of power station boiler in order to make inhaled-particles agglomerate into bigger particles, which can be easily removed but not change existing running conditions of boiler. According to this idea, a model is set up to study agglomeration rate and effect forces between fly ash inhaled-particles and atomized agglomerator particles. The developed agglomeration rate was expressed by relative particle number decreasing speed per unit volume. The result showed that viscosity force and flow resistance force give main influences on agglomeration effect of inhaled-particles, while springiness force and gravity have little effect on agglomeration effect of theirs. Factors influencing the agglomeration rate and effect forces are studied, including agglomerator concentration, agglomerator flux and agglomerator density, atomized-particles diameters and inhaled-particles diameter and so on.
基金supported by the HISP project(High performance solid propellants for In-Space Propulsion)of the European Community′s Seventh Framework Programme(FP7/2007-2013), under Grant Agreement No.262099,coordinated by FOI
文摘A joint international effort to improve solid propellant performance within the framework of a FP7European Project was described.Several metallized solid rocket propellants,of the broad family AP/HTPB/Metal in the ratio 68/14/18,were experimentally analyzed seeking to optimize the delivered specific impulse by identifying the most suitable high-energy fuel.Keeping the same nominal composition,different metallic fuels(including micrometric and nanometric Al,AlH3,and a variety of dual metal compositions)were characterized,tested,and contrasted to a conventional micrometric aluminum(30μm average grain size)certified for space flights.In order to overcome the intrinsic performance limitations of the matrix AP/HTPB,a new matrix consisting of ADN/GAP satisfying also the need for environmentally benign propellant formulation was considered as well.A comparative analysis between the two solid propellant systems in terms of ideal thermochemistry and experimental combustion properties reveals advantages and disadvantages of both.Overall,it is judged worthwhile to develop ADN/GAP propellants,with or without metallic fuels,to enhance the current status of solid rocket propulsion.Controlling morphology and mechanical properties of ADN/GAP compositions and understanding their flame structure and aggregation/agglomeration properties are the main issues still challenging industrial users.
基金supported by CNES(under Commande No.4700024752/DLA090 and No.4700028003/DLA094)
文摘Several metallized solid rocket propellants,AP/Metal/HTPB in the ratio 68/18/14,were experimentally analyzed at the Space Propulsion Laboratory of Politecnico di Milano.Effects of the metals(micrometric and nanometric Al,B,Mg,and a variety of dual metals) on the performance of the propellant were studied and contrasted to a conventional micrometric aluminum(30 μm average grain size) taken as reference.It is shown that the propellant microstructure plays a fundamental role in controlling the critical aggregation/agglomeration phenomena occurring below and near the burning surface.Two specific effects of microstructure in terms of steady burning rate and average agglomerate size are illustrated.
文摘5-（Difluoromethoxy）-2-mercapto- 1H-benzimi- dazole （DMB） was precipitated by adding acetic acid to the DMB sodium salt solution. The spherical agglomeration of DMB during the reactive crystallization in a batch crystallizer was monitored by real-time Particle Video Microscope （PVM）. We found that the low feeding rate of acetic acid, high crystallization temperature, low agitation rate or adding seed crystal can facilitate the formation of spherical agglomerates. By using a simple model, the mean crystal agglomerate size of DMB thus predicted is generally in agreement with the experimental data. In addition, the crystallization process of DMB was optimized by a new control strategy of supersaturation to avoid disadvantages brought by agglomeration.
