The slotted wingtip structure of birds is considered to be the product of improving flight efficiency in the process of evolution. It can change the vortex structure of wingtip and improve aerodynamic efficiency. This...The slotted wingtip structure of birds is considered to be the product of improving flight efficiency in the process of evolution. It can change the vortex structure of wingtip and improve aerodynamic efficiency. This paper reports a numerical investigation of slotted wing configuration undergoing bio-inspired flapping kinematics(consisting of plunging and in-line movement)extracted from a free-flying bald eagle wing. The aim is to eluci-date the collective mechanism of the flow generated by slotted tips and the lift contribution of each tip. Specifi-cally, the objective of the study is to determine how changes in the wing spacing affect the resulting aerodynamic interaction between the slotted tips and how that affects the force generation and efficiency. Changes in the phase angle between the flapping motions of slotted tips, as well as the spacings among them,can affect the resulting vortex inter-actions. The rear tips often operates in the wake of the frontal tips and, meanwhile, the vortex generated by the movement of the rear tips promote the frontal tips.The interaction of vortices in time and space leads to wing-wing interference and the flow around slotted tips becomes complicated and unstable. The innovative study of wingtip slot in unsteady state leads us to find that the aerodynamic interaction among slotted tips makes the overall lift characteristic better than that of the unslotted wings. The slotted wing configuration can efficiently convert more energy into lift. As the flapping frequency increases, the collective feature of slotted wing with constantly changing gaps can be more advantageous to enhance lift-generation performance.展开更多
In order to investigate the aerodynamic behavior of the Sutong bridge over Yangtze River during erection, a 1：50 sectional model of the bridge deck, a 1： 100 full aeroelastic model of the free standing pylon and a 1...In order to investigate the aerodynamic behavior of the Sutong bridge over Yangtze River during erection, a 1：50 sectional model of the bridge deck, a 1： 100 full aeroelastic model of the free standing pylon and a 1： 125 full aeroelastic model for the maxim cantilever configuration were built. The test results show that there was no serious vortex-induced vibration at the bridge deck, and that the free standing tower, the model scale and the turbulence intensity influenced static loading. The buffeting responses during the maximum cantilever configuration did not affect the safety of the bridge under construction.展开更多
This paper presents an experimental and systematic investigation about how geometric parameters on a biplane configuration have an influence on aerodynamic parameters. This experimental investigation has been develope...This paper presents an experimental and systematic investigation about how geometric parameters on a biplane configuration have an influence on aerodynamic parameters. This experimental investigation has been developed in a two-dimensional approach. Theoretical studies about biplanes configurations have been developed in the past, but there is not enough information about experimental wind tunnel data at low Reynolds number. This two-dimensional study is a first step to further tridimensional investigations about the box wing configuration. The main objective of the study is to find the relationships between the geometrical parameters which present the best aerodynamic behavior： the highest lift, the lowest drag and the lowest slope of the pitching moment. A tridimensional wing-box model will be designed following the pattern of the two dimensional study conclusions. It will respond to the geometrical relationships that have been considered to show the better aerodynamic behavior. This box-wing model will be studied in the aim of comparing the advantages and disadvantages between this biplane configuration and the plane configuration, looking for implementing the box-wing in the UAV＇s field. Although the box wing configuration has been used in a small number of existing UAV, prestigious researchers have found it as a field of high aerodynamic and structural potential.展开更多
The coupling behavior of the imbedded weapon store occurring between the local unsteady flow field round the store and the structure response on the processing of opening its bay-door is simulated by using numerical m...The coupling behavior of the imbedded weapon store occurring between the local unsteady flow field round the store and the structure response on the processing of opening its bay-door is simulated by using numerical method based on computational fluid mechanics(CFD).The transient aerodynamic behaviors when opening door under various flight altitudes and the corresponding structure deformation evolution in the unsteady flow fields are analyzed respectively and presented.The rules of aircraft attitude parameters′impacting to the responses of structure and the bay-door′s opening process are obtained by comparing with the analysis results.These rules can be applied to the structure design of bay-door and route specification of missile when disengaged and launched from within store.展开更多
An accurate and convenient method is essential for measuring the terminal velocity of seeds dispersed by wind.Systematic and random errors produced by existing methods lower the accuracy and convenience in determining...An accurate and convenient method is essential for measuring the terminal velocity of seeds dispersed by wind.Systematic and random errors produced by existing methods lower the accuracy and convenience in determining seed terminal velocity.In this study,a video camera was used to record the falling process of forty-one species of wind-borne seed with eight appendage structures and seven aerodynamic behaviors in a settling tower at a speed of 50 frames per second(fps).The videos were analyzed by Quick Time Player to determine seed acceleration height,acceleration time,and terminal velocity.The results showed that acceleration height and time,terminal velocity,and the diff erence between terminal velocity and descent velocity(DTD)increased with wing loading.Compared with dropping methods,the camera recording method eliminated the eff ect of acceleration and corrected seed terminal velocity.Based on wing loading,release heights were determined for accurate measurement of terminal velocity of diff erent seeds.This method,due to its inexpensive equipment,high accuracy,easy observation and operation,can be applied to measure the terminal velocity of wind dispersed seeds,and provides a promising method in exploring the dispersal process of seeds.展开更多
In this work the authors present a calculation process of the blades for wind turbine with horizontal axis. It is about a blade discretized by the finite element method （FEM） in order to determine the gyroscopic eff...In this work the authors present a calculation process of the blades for wind turbine with horizontal axis. It is about a blade discretized by the finite element method （FEM） in order to determine the gyroscopic effect during its rotation at a high speed. A blade must have the maximum output and resist to aerodynamic loads distributed over its length, which are related to its geometrical characteristics and the speed of the wind. For that, the authors wrote the relations whom determine these loads according to the flow speed of the wind, then, the authors integrated them in the laws of structure mechanics to obtain the motion equations of the blade. This process was applied to a twisted blade with a length of 1.9 m, built out of pressed aluminum sheet with a profile of the type NACA; this profile gives the best aerodynamic output. This blade is an element of a three-bladed propeller for wind turbine of maximum power 5 kW. Finally, we visualized its deformations and then the authors checked its holding in service.展开更多
基金the support from the National Natural Science Foundation of China(Nos.11872314 and U1613227)the Key R&D Program in Shaanxi Province of China(No.2020GY-154)。
文摘The slotted wingtip structure of birds is considered to be the product of improving flight efficiency in the process of evolution. It can change the vortex structure of wingtip and improve aerodynamic efficiency. This paper reports a numerical investigation of slotted wing configuration undergoing bio-inspired flapping kinematics(consisting of plunging and in-line movement)extracted from a free-flying bald eagle wing. The aim is to eluci-date the collective mechanism of the flow generated by slotted tips and the lift contribution of each tip. Specifi-cally, the objective of the study is to determine how changes in the wing spacing affect the resulting aerodynamic interaction between the slotted tips and how that affects the force generation and efficiency. Changes in the phase angle between the flapping motions of slotted tips, as well as the spacings among them,can affect the resulting vortex inter-actions. The rear tips often operates in the wake of the frontal tips and, meanwhile, the vortex generated by the movement of the rear tips promote the frontal tips.The interaction of vortices in time and space leads to wing-wing interference and the flow around slotted tips becomes complicated and unstable. The innovative study of wingtip slot in unsteady state leads us to find that the aerodynamic interaction among slotted tips makes the overall lift characteristic better than that of the unslotted wings. The slotted wing configuration can efficiently convert more energy into lift. As the flapping frequency increases, the collective feature of slotted wing with constantly changing gaps can be more advantageous to enhance lift-generation performance.
基金The National Natural Science Foundation of China(Nos.50808148 and 90815016)
文摘In order to investigate the aerodynamic behavior of the Sutong bridge over Yangtze River during erection, a 1：50 sectional model of the bridge deck, a 1： 100 full aeroelastic model of the free standing pylon and a 1： 125 full aeroelastic model for the maxim cantilever configuration were built. The test results show that there was no serious vortex-induced vibration at the bridge deck, and that the free standing tower, the model scale and the turbulence intensity influenced static loading. The buffeting responses during the maximum cantilever configuration did not affect the safety of the bridge under construction.
文摘This paper presents an experimental and systematic investigation about how geometric parameters on a biplane configuration have an influence on aerodynamic parameters. This experimental investigation has been developed in a two-dimensional approach. Theoretical studies about biplanes configurations have been developed in the past, but there is not enough information about experimental wind tunnel data at low Reynolds number. This two-dimensional study is a first step to further tridimensional investigations about the box wing configuration. The main objective of the study is to find the relationships between the geometrical parameters which present the best aerodynamic behavior： the highest lift, the lowest drag and the lowest slope of the pitching moment. A tridimensional wing-box model will be designed following the pattern of the two dimensional study conclusions. It will respond to the geometrical relationships that have been considered to show the better aerodynamic behavior. This box-wing model will be studied in the aim of comparing the advantages and disadvantages between this biplane configuration and the plane configuration, looking for implementing the box-wing in the UAV＇s field. Although the box wing configuration has been used in a small number of existing UAV, prestigious researchers have found it as a field of high aerodynamic and structural potential.
文摘The coupling behavior of the imbedded weapon store occurring between the local unsteady flow field round the store and the structure response on the processing of opening its bay-door is simulated by using numerical method based on computational fluid mechanics(CFD).The transient aerodynamic behaviors when opening door under various flight altitudes and the corresponding structure deformation evolution in the unsteady flow fields are analyzed respectively and presented.The rules of aircraft attitude parameters′impacting to the responses of structure and the bay-door′s opening process are obtained by comparing with the analysis results.These rules can be applied to the structure design of bay-door and route specification of missile when disengaged and launched from within store.
基金the National Natural Science Foundation of China(41571270).
文摘An accurate and convenient method is essential for measuring the terminal velocity of seeds dispersed by wind.Systematic and random errors produced by existing methods lower the accuracy and convenience in determining seed terminal velocity.In this study,a video camera was used to record the falling process of forty-one species of wind-borne seed with eight appendage structures and seven aerodynamic behaviors in a settling tower at a speed of 50 frames per second(fps).The videos were analyzed by Quick Time Player to determine seed acceleration height,acceleration time,and terminal velocity.The results showed that acceleration height and time,terminal velocity,and the diff erence between terminal velocity and descent velocity(DTD)increased with wing loading.Compared with dropping methods,the camera recording method eliminated the eff ect of acceleration and corrected seed terminal velocity.Based on wing loading,release heights were determined for accurate measurement of terminal velocity of diff erent seeds.This method,due to its inexpensive equipment,high accuracy,easy observation and operation,can be applied to measure the terminal velocity of wind dispersed seeds,and provides a promising method in exploring the dispersal process of seeds.
文摘In this work the authors present a calculation process of the blades for wind turbine with horizontal axis. It is about a blade discretized by the finite element method （FEM） in order to determine the gyroscopic effect during its rotation at a high speed. A blade must have the maximum output and resist to aerodynamic loads distributed over its length, which are related to its geometrical characteristics and the speed of the wind. For that, the authors wrote the relations whom determine these loads according to the flow speed of the wind, then, the authors integrated them in the laws of structure mechanics to obtain the motion equations of the blade. This process was applied to a twisted blade with a length of 1.9 m, built out of pressed aluminum sheet with a profile of the type NACA; this profile gives the best aerodynamic output. This blade is an element of a three-bladed propeller for wind turbine of maximum power 5 kW. Finally, we visualized its deformations and then the authors checked its holding in service.
基金Project supported by the Foundation of Jiangsu Collaborative Innovation Center for Building Energy Saving Construction Technology for Young Teachers(No.SJXTQ1515),China
