Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controlle...Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.展开更多
We propose a feedback type oscillator and two negative resistance oscillators.These microwave oscillators have been designed in the S band frequency.A relatively symmetric resonator is used in the feedback type oscill...We propose a feedback type oscillator and two negative resistance oscillators.These microwave oscillators have been designed in the S band frequency.A relatively symmetric resonator is used in the feedback type oscillator.The first negative resistance oscillator uses a simple lumped element resonator which is substituted by a microstrip resonator in the second oscillator to improve results.The negative resistance oscillator produces 4.207 dBm and 7.124 dBm output power with the lumped element resonator and microstrip resonator respectively,and the feedback type oscillator produces ?10.707 dBm output power.The feedback type oscillator operates at 3 GHz with phase noise levels at-83.30 dBc/Hz and-103.3 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively.The phase noise levels of the negative resistance oscillator with the lumped element resonator are-94.64 dBc/Hz and-116 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively,at an oscillation frequency of 3.053 GHz.With the microstrip resonator the phase noise levels are-99.49 dBc/Hz and-119.641 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively,at an oscillation frequency of 3.072 GHz.The results showed that both the output power and the phase noise of the negative resistance oscillators were better than those of the feedback type oscillator.展开更多
This paper describes two single-chip——complex programmable logic devices/field programmable gate arrays(CPLD/FPGA)——implementations of the new advanced encryption standard (AES) algorithm based on the basic iterat...This paper describes two single-chip——complex programmable logic devices/field programmable gate arrays(CPLD/FPGA)——implementations of the new advanced encryption standard (AES) algorithm based on the basic iteration architecture (design [A]) and the hybrid pipelining architecture (design [B]). Design [A] is an encryption-and-decryption implementation based on the basic iteration architecture. This design not only supports 128-bit, 192-bit, 256-bit keys, but saves hardware resources because of the iteration architecture and sharing technology. Design [B] is a method of the 2×2 hybrid pipelining architecture. Based on the AES interleaved mode of operation, the design successfully accomplishes the algorithm, which operates in the feedback mode (cipher block chaining). It not only guarantees security of encryption/decryption, but obtains high data throughput of 1.05 Gb/s. The two designs have been realized on Aitera′s EP20k300EBC652-1 devices.展开更多
基金Supported by the National Natural Science Foundation of China (61104084, 61290323)the Guangdong Education University-Industry Cooperation Projects (2010B090400410)
文摘Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.
文摘We propose a feedback type oscillator and two negative resistance oscillators.These microwave oscillators have been designed in the S band frequency.A relatively symmetric resonator is used in the feedback type oscillator.The first negative resistance oscillator uses a simple lumped element resonator which is substituted by a microstrip resonator in the second oscillator to improve results.The negative resistance oscillator produces 4.207 dBm and 7.124 dBm output power with the lumped element resonator and microstrip resonator respectively,and the feedback type oscillator produces ?10.707 dBm output power.The feedback type oscillator operates at 3 GHz with phase noise levels at-83.30 dBc/Hz and-103.3 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively.The phase noise levels of the negative resistance oscillator with the lumped element resonator are-94.64 dBc/Hz and-116 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively,at an oscillation frequency of 3.053 GHz.With the microstrip resonator the phase noise levels are-99.49 dBc/Hz and-119.641 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively,at an oscillation frequency of 3.072 GHz.The results showed that both the output power and the phase noise of the negative resistance oscillators were better than those of the feedback type oscillator.
文摘This paper describes two single-chip——complex programmable logic devices/field programmable gate arrays(CPLD/FPGA)——implementations of the new advanced encryption standard (AES) algorithm based on the basic iteration architecture (design [A]) and the hybrid pipelining architecture (design [B]). Design [A] is an encryption-and-decryption implementation based on the basic iteration architecture. This design not only supports 128-bit, 192-bit, 256-bit keys, but saves hardware resources because of the iteration architecture and sharing technology. Design [B] is a method of the 2×2 hybrid pipelining architecture. Based on the AES interleaved mode of operation, the design successfully accomplishes the algorithm, which operates in the feedback mode (cipher block chaining). It not only guarantees security of encryption/decryption, but obtains high data throughput of 1.05 Gb/s. The two designs have been realized on Aitera′s EP20k300EBC652-1 devices.
