The 3D characteristic diagram of acoustically induced surface vibration was employed to study the influence of different buried landmines on the acoustic detection signal. By using the vehicular experimental system fo...The 3D characteristic diagram of acoustically induced surface vibration was employed to study the influence of different buried landmines on the acoustic detection signal. By using the vehicular experimental system for acoustic landmine detection and the method of scanning detection, the 3D characteristic diagrams of surface vibration were measured when different objects were buried underground, including big plastic landmine, small plastic landmine, big metal landmine and bricks. The results show that, under the given conditions, the surface vibration amplitudes of big plastic landmine, big metal landmine, small plastic landmine and bricks decrease in turn. The 3D characteristic diagrams of surface vibration can be used to further identify the locations of buried landmines.展开更多
为探究叶片出口梯形切割对离心泵蜗壳流激噪声的影响,以一台比转速为66的单级单吸离心泵为对象,通过定义切割宽度系数δ与径向高度系数γ,设计了9种切割方案。基于RNG k-ε湍流模型对离心泵进行全三维非定常数值模拟,在此基础上采用边...为探究叶片出口梯形切割对离心泵蜗壳流激噪声的影响,以一台比转速为66的单级单吸离心泵为对象,通过定义切割宽度系数δ与径向高度系数γ,设计了9种切割方案。基于RNG k-ε湍流模型对离心泵进行全三维非定常数值模拟,在此基础上采用边界元法(boundary element method,BEM)计算内场噪声,采用结构有限元法(finite element method,FEM)耦合声学边界元方法计算外场流激噪声;分析不同切割方案下离心泵水力特性和噪声幅射特性,经试验方法验证数值计算的准确性。研究表明:动静干涉是离心泵蜗壳流激噪声产生的主要原因,合理的叶片出口梯形切割能使离心泵水力性能基本稳定的同时有效降低动静干涉强度及蜗壳流激噪声水平;声学性能最优切割方案,叶频处的进、出口监测点声压级分别下降13%和7.5%,外场噪声监测点声压级下降2.4%。展开更多
通过实验测试和理论计算,对兆瓦级风电直驱型发电机结构音调噪声的产生机理、声源的位置和传递路径进行分析。结合发电机的实际结构,设计减振降噪方案,研发相应的多层复合阻尼材料和吸声材料,并通过一台实际机型,开展噪声控制方案的实...通过实验测试和理论计算,对兆瓦级风电直驱型发电机结构音调噪声的产生机理、声源的位置和传递路径进行分析。结合发电机的实际结构,设计减振降噪方案,研发相应的多层复合阻尼材料和吸声材料,并通过一台实际机型,开展噪声控制方案的实施和评价,相比原发电机,其主要音调噪声从96 d B(A)降低到83.4 d B(A),从而有效提升该机型海外市场的竞争力。展开更多
基金Supported by the National Natural Science Foundation of China(No.61575119)Science and Technology on Near-Surface Detection Laboratory(No.TCGZ2015A005)State Key Laboratory of Precision Measuring Technology and Instruments(PIL1402)
文摘The 3D characteristic diagram of acoustically induced surface vibration was employed to study the influence of different buried landmines on the acoustic detection signal. By using the vehicular experimental system for acoustic landmine detection and the method of scanning detection, the 3D characteristic diagrams of surface vibration were measured when different objects were buried underground, including big plastic landmine, small plastic landmine, big metal landmine and bricks. The results show that, under the given conditions, the surface vibration amplitudes of big plastic landmine, big metal landmine, small plastic landmine and bricks decrease in turn. The 3D characteristic diagrams of surface vibration can be used to further identify the locations of buried landmines.
文摘为探究叶片出口梯形切割对离心泵蜗壳流激噪声的影响,以一台比转速为66的单级单吸离心泵为对象,通过定义切割宽度系数δ与径向高度系数γ,设计了9种切割方案。基于RNG k-ε湍流模型对离心泵进行全三维非定常数值模拟,在此基础上采用边界元法(boundary element method,BEM)计算内场噪声,采用结构有限元法(finite element method,FEM)耦合声学边界元方法计算外场流激噪声;分析不同切割方案下离心泵水力特性和噪声幅射特性,经试验方法验证数值计算的准确性。研究表明:动静干涉是离心泵蜗壳流激噪声产生的主要原因,合理的叶片出口梯形切割能使离心泵水力性能基本稳定的同时有效降低动静干涉强度及蜗壳流激噪声水平;声学性能最优切割方案,叶频处的进、出口监测点声压级分别下降13%和7.5%,外场噪声监测点声压级下降2.4%。
文摘通过实验测试和理论计算,对兆瓦级风电直驱型发电机结构音调噪声的产生机理、声源的位置和传递路径进行分析。结合发电机的实际结构,设计减振降噪方案,研发相应的多层复合阻尼材料和吸声材料,并通过一台实际机型,开展噪声控制方案的实施和评价,相比原发电机,其主要音调噪声从96 d B(A)降低到83.4 d B(A),从而有效提升该机型海外市场的竞争力。
