Soft magnetic metallic materials have been widely used for absorbing electromagnetic wave.Flaky Fe 86 t Si t Al 14（t=9,11,14 and 16） alloys powders were prepared from melt-quenched ribbons by annealing and milling.I...Soft magnetic metallic materials have been widely used for absorbing electromagnetic wave.Flaky Fe 86 t Si t Al 14（t=9,11,14 and 16） alloys powders were prepared from melt-quenched ribbons by annealing and milling.In a previous report we discussed the order-disordered structure of this alloys.In this article,we studied their electron structure.Covalence electron numbers of（111） and（100） plane increase with increasing Si content but Bohr magneton decreases.Complex permittivity and complex permeability are both decreased with increasing Si content t.The lowest value of reflectivity among the four alloys is originated from Fe 70 Si 14 Al 14.The peak values of reflectivity are all lower than 10 dB,and the absorbing frequency range（R 10 dB） increases from 1 to 2 GHz when t reaches 16.展开更多
Synthesis and characterization of lanthanum-doped yttrium iro n garnet(YIG)in the compositional se ries of Y_(3-x)La_(x)Fe_(5)O_(12)(x=0.0,0.1,0.3,and 0.5)were carried out.All compositions were made by using solid sta...Synthesis and characterization of lanthanum-doped yttrium iro n garnet(YIG)in the compositional se ries of Y_(3-x)La_(x)Fe_(5)O_(12)(x=0.0,0.1,0.3,and 0.5)were carried out.All compositions were made by using solid state reaction method with ball-milling technique.The phase formation,surface morphology,magnetic properties,and microwave absorbing ability of all compositions were characterized by using an X-ray diffractometer,a scanning electron microscope,a vibrating sample magnetometer,and a Vector network analyzer.The results reveal that all compositions are crystallized into Y_(3)Fe_(5)O_(12)phase(space group la-3d(230).It was observed that the lattice constant is increased from 1.2373 to 1.2421 nm with the increase of lanthanum substitution level from x=0.0-0.5.The crystallite size of Y_(3-x)La_(x)Fe_(5)O_(12)series calculated by Scherrer method is found to decrease from 78 nm in x=0.0-63 nm in x=0.5.The particle size distribution from the surface morphology image analysis is shifted to lower-range number with the increase of lanthanum substitution level from x=0.0 to 0.5.The substitution process also affects the lattice distortion in La-doped samples and changes the bond angles and bond lengths of the YIG structure.As the results,a linear correlation between the Fe'-O-Fe bond angle with magnetic properties parameters of saturation magnetization(M_(s))and remanence magnetization(M_(r))was studied.Due to the lanthanum substitution process,all La^(3+)-doped samples possess higher M_(s)and M_(r)values compared to the original composition.The results of Vector network analyzer show that the improvement of the M_(s)and M_(r)plays an important role in enhancing the microwave absorbing ability of the materials.The minimum RL changes from-8.22 dB(~85.22%microwave absorption)in x=0.0 to-14.21 dB(~96.25%microwave absorption)in x=0.5.The enhancement is mainly ascribed to the natural magnetic resonance loss and dipoIe-polarization loss due to the substitution process.The decreasing particle size also enhances the microwave展开更多
In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infi...In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infiltration(CVI)process.The graphene framework prepared by 3D printing and frozen self-assembly exhibits a lightweight structure and a perforated conductive network,which extends the transmission path of incident microwaves.The introduced ceramic coatings can effectively tune the impedance matching degree and supply a lossy phase,and the hierarchical structure of the composites enhances the multiple scattering of the incident microwaves.As expected,the 3D-rGO/BN/SiC composites possess an excellent absorbing performance with a minimum reflection loss value of–37.8 dB,and the widest effective absorbing bandwidth(RL<–10 dB)of 5.90 GHz is obtained.The controllable fabrication of composites can provide a guideline for rational design and fabrication of high-performance electromagnetic waves absorbing materials in practical applications.展开更多
基金State Key Laboratory of Electronic Thin Films and Integrated Devices for support of this work (KFJJ200815)supported by the Scientific Research Fund of Sichuan Provincial Education Department,China (08ZA026)Talents Project of Xihua University,China (R1020106)
文摘Soft magnetic metallic materials have been widely used for absorbing electromagnetic wave.Flaky Fe 86 t Si t Al 14（t=9,11,14 and 16） alloys powders were prepared from melt-quenched ribbons by annealing and milling.In a previous report we discussed the order-disordered structure of this alloys.In this article,we studied their electron structure.Covalence electron numbers of（111） and（100） plane increase with increasing Si content but Bohr magneton decreases.Complex permittivity and complex permeability are both decreased with increasing Si content t.The lowest value of reflectivity among the four alloys is originated from Fe 70 Si 14 Al 14.The peak values of reflectivity are all lower than 10 dB,and the absorbing frequency range（R 10 dB） increases from 1 to 2 GHz when t reaches 16.
基金Project supported by the Ministry of Finance Indonesia for the research grant through the competitive research program of RISPRO Kompetisi(PRJ-45/LPDP/2020)。
文摘Synthesis and characterization of lanthanum-doped yttrium iro n garnet(YIG)in the compositional se ries of Y_(3-x)La_(x)Fe_(5)O_(12)(x=0.0,0.1,0.3,and 0.5)were carried out.All compositions were made by using solid state reaction method with ball-milling technique.The phase formation,surface morphology,magnetic properties,and microwave absorbing ability of all compositions were characterized by using an X-ray diffractometer,a scanning electron microscope,a vibrating sample magnetometer,and a Vector network analyzer.The results reveal that all compositions are crystallized into Y_(3)Fe_(5)O_(12)phase(space group la-3d(230).It was observed that the lattice constant is increased from 1.2373 to 1.2421 nm with the increase of lanthanum substitution level from x=0.0-0.5.The crystallite size of Y_(3-x)La_(x)Fe_(5)O_(12)series calculated by Scherrer method is found to decrease from 78 nm in x=0.0-63 nm in x=0.5.The particle size distribution from the surface morphology image analysis is shifted to lower-range number with the increase of lanthanum substitution level from x=0.0 to 0.5.The substitution process also affects the lattice distortion in La-doped samples and changes the bond angles and bond lengths of the YIG structure.As the results,a linear correlation between the Fe'-O-Fe bond angle with magnetic properties parameters of saturation magnetization(M_(s))and remanence magnetization(M_(r))was studied.Due to the lanthanum substitution process,all La^(3+)-doped samples possess higher M_(s)and M_(r)values compared to the original composition.The results of Vector network analyzer show that the improvement of the M_(s)and M_(r)plays an important role in enhancing the microwave absorbing ability of the materials.The minimum RL changes from-8.22 dB(~85.22%microwave absorption)in x=0.0 to-14.21 dB(~96.25%microwave absorption)in x=0.5.The enhancement is mainly ascribed to the natural magnetic resonance loss and dipoIe-polarization loss due to the substitution process.The decreasing particle size also enhances the microwave
基金supported by the National Natural Science Foundation of China(No.51772310)National Natural Science Foundation of China(No.52222202)+3 种基金Chinese Academy of Sciences Key Research Program of Frontier Sciences(No.QYZDYSSWJSC031)Key Deployment Projects of the Chinese Academy of Sciences(No.ZDRW-CN2019-01)Shanghai Sailing Program(No.21YF1454600)Outstanding Chinese and Foreign Youth Exchange Program of China Association of Science and Technology.
文摘In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infiltration(CVI)process.The graphene framework prepared by 3D printing and frozen self-assembly exhibits a lightweight structure and a perforated conductive network,which extends the transmission path of incident microwaves.The introduced ceramic coatings can effectively tune the impedance matching degree and supply a lossy phase,and the hierarchical structure of the composites enhances the multiple scattering of the incident microwaves.As expected,the 3D-rGO/BN/SiC composites possess an excellent absorbing performance with a minimum reflection loss value of–37.8 dB,and the widest effective absorbing bandwidth(RL<–10 dB)of 5.90 GHz is obtained.The controllable fabrication of composites can provide a guideline for rational design and fabrication of high-performance electromagnetic waves absorbing materials in practical applications.
