Tremendous effort has been devoted to lithium‐sulfur batteries,where flooded electrolytes have been employed ubiquitously.The use of lean electrolytes albeit indispensable for practical applications often causes low ...Tremendous effort has been devoted to lithium‐sulfur batteries,where flooded electrolytes have been employed ubiquitously.The use of lean electrolytes albeit indispensable for practical applications often causes low capacity and fast capacity fading of the sulfur cathode;thus,the electrolyte/sulfur active mass ratios below 5μL/mg have been rarely reported.Herein,we demonstrate that ZnS coating transforms sulfur cathode materials electrolyte‐philic,which tremendously promotes the performance in lean electrolytes.The ZnS‐coated Li2S@graphene cathode delivers an initial discharge capacity of 944mAh/g at an E/S ratio of 2μL/mg at the active mass loading of 5.0 mg Li2S/cm^2,corresponding to an impressive specific energy of 500Wh/kg based on the mass of cathode,electrolyte,and the assumed minimal mass of lithium metal anode.Density functional theory calculations reveal strong binding between ZnS crystals and electrolyte solvent molecules,explaining the better wetting properties.We also demonstrate the reversible cycling of a hybrid cathode of ZnS‐coated Li2S@graphene mixed with VS2 as an additive at an E/AM(active mass)ratio of 1.1μL/mg,equivalent to the specific energy of 432 Wh/kg on the basis of the mass of electrodes and electrolyte.展开更多
ZnS thin films were deposited on glass substrates by thermal evaporation from millimetric crystals of ZnS. The structural, compositional and optical properties of the films are studied by X-ray diffraction, SEM micros...ZnS thin films were deposited on glass substrates by thermal evaporation from millimetric crystals of ZnS. The structural, compositional and optical properties of the films are studied by X-ray diffraction, SEM microscopy, and UV-VIS spectroscopy. The obtained results show that the films are pin hole free and have a cubic zinc blend structure with （111） preferential orientation. The estimated optical band gap is 3.5 eV and the refractive index in the visible wavelength ranges from 2.5 to 1.8. The good cubic structure obtained for thin layers enabled us to conclude that the prepared ZnS films may have application as buffer layer in replacement of the harmful CdS in CIGS thin film solar cells or as an antireflection coating in silicon-based solar cells.展开更多
The zinc-rich epoxy cathodic protection coating is the most widely used anticorrosion material for marine steel.However,traditional conductive fillers lack the intelligent self-healing effect,which limits the long-ter...The zinc-rich epoxy cathodic protection coating is the most widely used anticorrosion material for marine steel.However,traditional conductive fillers lack the intelligent self-healing effect,which limits the long-term anticorrosion performance.Herein,with uniform carbon-coated ZnS(ZnS@C)nanoballs as the smart active release filler,we propose an anticorrosive and self-healing zinc-rich maleic anhydride epoxy coating.Due to the high pore filling efficiency of the nanoballs,the water vapor transmission rate of the coating with an initial corrosion efficiency of 99.92%and a low-frequency impedance of|Z|f=10mHz=3.88×10^(10) Ω·cm^(2),was reduced by 52%.The carbon-shell of the nanoball increases electron transmission paths in the coating and improves conductivity by nearly two orders of magnitude,which effectively activates more Zn-sites and extends the cathodic protection time.Moreover,once the steel-substrate undergoes regional corrosion,the SO_(4)^(2-)hydrolyzes from the ZnS-core of the nanoball and reacts with iron ions on the corroded area accurately and intelligently to fill the gap and self-heals into a new dense barrier layer(Fe_(2)(SO_(4))_(3),etc.),which significantly improves the shielding protection ability during the long-term usage of the coating.The effective anticorrosion time of the proposed coating could be up to 3,400 h.展开更多
基金Office of Energy Efficiency and Renewable Energy,Grant/Award Number:DE‐FOA‐0001629U.S.Department of Energy,Grant/Award Number:DE‐AC02‐06CH11357。
文摘Tremendous effort has been devoted to lithium‐sulfur batteries,where flooded electrolytes have been employed ubiquitously.The use of lean electrolytes albeit indispensable for practical applications often causes low capacity and fast capacity fading of the sulfur cathode;thus,the electrolyte/sulfur active mass ratios below 5μL/mg have been rarely reported.Herein,we demonstrate that ZnS coating transforms sulfur cathode materials electrolyte‐philic,which tremendously promotes the performance in lean electrolytes.The ZnS‐coated Li2S@graphene cathode delivers an initial discharge capacity of 944mAh/g at an E/S ratio of 2μL/mg at the active mass loading of 5.0 mg Li2S/cm^2,corresponding to an impressive specific energy of 500Wh/kg based on the mass of cathode,electrolyte,and the assumed minimal mass of lithium metal anode.Density functional theory calculations reveal strong binding between ZnS crystals and electrolyte solvent molecules,explaining the better wetting properties.We also demonstrate the reversible cycling of a hybrid cathode of ZnS‐coated Li2S@graphene mixed with VS2 as an additive at an E/AM(active mass)ratio of 1.1μL/mg,equivalent to the specific energy of 432 Wh/kg on the basis of the mass of electrodes and electrolyte.
文摘ZnS thin films were deposited on glass substrates by thermal evaporation from millimetric crystals of ZnS. The structural, compositional and optical properties of the films are studied by X-ray diffraction, SEM microscopy, and UV-VIS spectroscopy. The obtained results show that the films are pin hole free and have a cubic zinc blend structure with （111） preferential orientation. The estimated optical band gap is 3.5 eV and the refractive index in the visible wavelength ranges from 2.5 to 1.8. The good cubic structure obtained for thin layers enabled us to conclude that the prepared ZnS films may have application as buffer layer in replacement of the harmful CdS in CIGS thin film solar cells or as an antireflection coating in silicon-based solar cells.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(Nos.2022R1A2C1007070,2019R1C1C1006310,2021K2A9A2A06044652,2020R1I1A1A01072996,and 2019R1A2C1002844).
文摘The zinc-rich epoxy cathodic protection coating is the most widely used anticorrosion material for marine steel.However,traditional conductive fillers lack the intelligent self-healing effect,which limits the long-term anticorrosion performance.Herein,with uniform carbon-coated ZnS(ZnS@C)nanoballs as the smart active release filler,we propose an anticorrosive and self-healing zinc-rich maleic anhydride epoxy coating.Due to the high pore filling efficiency of the nanoballs,the water vapor transmission rate of the coating with an initial corrosion efficiency of 99.92%and a low-frequency impedance of|Z|f=10mHz=3.88×10^(10) Ω·cm^(2),was reduced by 52%.The carbon-shell of the nanoball increases electron transmission paths in the coating and improves conductivity by nearly two orders of magnitude,which effectively activates more Zn-sites and extends the cathodic protection time.Moreover,once the steel-substrate undergoes regional corrosion,the SO_(4)^(2-)hydrolyzes from the ZnS-core of the nanoball and reacts with iron ions on the corroded area accurately and intelligently to fill the gap and self-heals into a new dense barrier layer(Fe_(2)(SO_(4))_(3),etc.),which significantly improves the shielding protection ability during the long-term usage of the coating.The effective anticorrosion time of the proposed coating could be up to 3,400 h.
