为了系统研究锂离子电池正极片制作工艺对电池性能的影响,采用Li Fe PO4作为正极活性材料组装成扣式实验电池,分别考察了正极片的涂敷厚度、辊压压下率、辊压道次数和辊压温度对电池主要电化学性能的影响,发现这些工艺因素显著影响电池...为了系统研究锂离子电池正极片制作工艺对电池性能的影响,采用Li Fe PO4作为正极活性材料组装成扣式实验电池,分别考察了正极片的涂敷厚度、辊压压下率、辊压道次数和辊压温度对电池主要电化学性能的影响,发现这些工艺因素显著影响电池性能,而且都可以归结为通过影响电池内阻而影响电池性能的。当涂敷厚度为100 mm、辊压压下率为50%、辊压道次数为3、辊压温度为160℃时电池有比较好的综合性能。展开更多
In this paper, thickness uniformity of poly（9,9-di-n-octylfluorene） films patterned by inkjet printing was im- proved by the use of solvent mixtures （a solvent with higher volatility, higher surface energy and lowe...In this paper, thickness uniformity of poly（9,9-di-n-octylfluorene） films patterned by inkjet printing was im- proved by the use of solvent mixtures （a solvent with higher volatility, higher surface energy and lower viscosity, with another solvent with lower volatility, lower surface energy and higher viscosity）. The average thickness of inkjet printed poly（9,9-di-n-octylfluorene） films was increased from ca. 30 nm to ca. 100 nm when solvent mixtures were used instead of pure chlorobenzene. More flat PFO films were formed instead of the original films with con- cave-lens like cross-section formed by coffee ring effect. This improvement was explained by combination of in- tense Marangoni flow at early drying process and weak complementary flow at the later drying process formed in the solvent mixture. Patterned poly（9,9-di-n-octylfluorene） films were used for fabrication of electroluminescence devices with improved electronic property. Array of pixels with about 80% effective light-emitting area was ob- tained.展开更多
文摘为了系统研究锂离子电池正极片制作工艺对电池性能的影响,采用Li Fe PO4作为正极活性材料组装成扣式实验电池,分别考察了正极片的涂敷厚度、辊压压下率、辊压道次数和辊压温度对电池主要电化学性能的影响,发现这些工艺因素显著影响电池性能,而且都可以归结为通过影响电池内阻而影响电池性能的。当涂敷厚度为100 mm、辊压压下率为50%、辊压道次数为3、辊压温度为160℃时电池有比较好的综合性能。
基金This work was subsidized by the National Natural Science Foundation of China，the Ministry of Science and Technology of China
文摘In this paper, thickness uniformity of poly（9,9-di-n-octylfluorene） films patterned by inkjet printing was im- proved by the use of solvent mixtures （a solvent with higher volatility, higher surface energy and lower viscosity, with another solvent with lower volatility, lower surface energy and higher viscosity）. The average thickness of inkjet printed poly（9,9-di-n-octylfluorene） films was increased from ca. 30 nm to ca. 100 nm when solvent mixtures were used instead of pure chlorobenzene. More flat PFO films were formed instead of the original films with con- cave-lens like cross-section formed by coffee ring effect. This improvement was explained by combination of in- tense Marangoni flow at early drying process and weak complementary flow at the later drying process formed in the solvent mixture. Patterned poly（9,9-di-n-octylfluorene） films were used for fabrication of electroluminescence devices with improved electronic property. Array of pixels with about 80% effective light-emitting area was ob- tained.
