Nanostructured thermal barrier coatings(TBCs) often provide high degradation resistance, as well as extended lifetime. However, the underlying mechanism has not been fully understood. In this study, the sintering char...Nanostructured thermal barrier coatings(TBCs) often provide high degradation resistance, as well as extended lifetime. However, the underlying mechanism has not been fully understood. In this study, the sintering characteristics of nanostructured yttria-stabilized zirconia(YSZ) coatings were investigated,and compared with those of the conventional YSZ coatings. Multiscale characterizations of the changes in microstructures and properties were performed. Results showed that the enhanced high-performance durability was mainly attributed to different sintering mechanisms of lamellar zones and nanozones.Sintering characteristics of the lamellar zones were similar to those of the conventional coatings. Stagesensitive healing of two-dimensional(2 D) pores dominated the sintering behavior of the lamellar zones.However, the differential densification rates between nanozones and lamellar zones of the nanostructured TBCs led to the formation of coarse voids. This counteractive effect, against healing of 2 D pores, was the main factor contributing to the retardation of the performance degradation of bimodal TBCs during thermal exposure. Based on the understanding of the performance-degradation resistance, an outlook towards TBCs with higher performances was presented.展开更多
Poor flowability of printable powders and long preparation cycles are the main challenges in the selective laser sintering(SLS)of chopped carbon fiber(C_(f))reinforced silicon carbide(SiC)composites with complex struc...Poor flowability of printable powders and long preparation cycles are the main challenges in the selective laser sintering(SLS)of chopped carbon fiber(C_(f))reinforced silicon carbide(SiC)composites with complex structures.In this study,we develop an efficient and novel processing route in the fabrication of lightweight SiC composites via the SLS of phenolic resin(PR)and Cr powders with the addition of a-SiC particles combined with the one-step reactive melt infiltration(RMI).The effects of a-SiC addition on the microstructural evolution of the C_(f)/SiC/PR printed bodies,C_(f)/SiC/C green bodies,and derived SiC composites were investigated.The results indicate that the added a-SiC particles play an important role in enhancing the flowability of raw powders,reducing the porosity.increasing the reliability of the C/SiC/C green bodies,and contributing to improving the microstructure homogeneity and mechanical properties of the SiC composites.The maximum density,flexural strength,and fracture toughness(Kic)of the SiC composites are 2.749±0.006 g·cm^(3),266±5 MPa,and 3.30±0.06 MPa-m,respectively.The coefficient of thermal expansion(CTE,a)of the SiC composites is approximately 4.29×10^(-6)K^(-1)from room temperature(RT)to 900℃,and the thermal conductivity(x)is in the range of 80.15-92.48 W·m^(-1)·K^(-1)at RT.The high-temperature strength of the SiC composites increase to 287±18 MPa up to 1200℃.This study provides a novel as well as feasible tactic for the preparation of high-quality printable powders as well as lightweight,high-strength,and high-x SiC composites with complex structures by the SLS and RMI.展开更多
Long-term optical data storage(ODS)technology is essential to break the bottleneck of high energy consumption for information storage in the current era of big data.Here,ODS with an ultralong lifetime of 2×10^(7)...Long-term optical data storage(ODS)technology is essential to break the bottleneck of high energy consumption for information storage in the current era of big data.Here,ODS with an ultralong lifetime of 2×10^(7)years is attained with single ultrafast laser pulse induced reduction of Eu^(3+)ions and tailoring of optical properties inside the Eu-doped aluminosilicate glasses.We demonstrate that the induced local modifications in the glass can stand against the temperature of up to 970 K and strong ultraviolet light irradiation with the power density of 100 kW/cm^(2).Furthermore,the active ions of Eu^(2+)exhibit strong and broadband emission with the full width at half maximum reaching 190 nm,and the photoluminescence(PL)is flexibly tunable in the whole visible region by regulating the alkaline earth metal ions in the glasses.The developed technology and materials will be of great significance in photonic applications such as long-term ODS.展开更多
Sodium-ion batteries stand a chance of enabling fast charging ability and long lifespan while operating at low temperature(low-T).However,sluggish kinetics and aggravated dendrites present two major challenges for ano...Sodium-ion batteries stand a chance of enabling fast charging ability and long lifespan while operating at low temperature(low-T).However,sluggish kinetics and aggravated dendrites present two major challenges for anodes to achieve the goal at low-T.Herein,we propose an interlayer confined strategy for tailoring nitrogen terminals on Ti_(3)C_(2) MXene(Ti_(3)C_(2)-N_(funct)) to address these issues.The introduction of nitrogen terminals endows Ti_(3)C_(2)-N_(funct) with large interlayer space and charge redistribution,improved conductivity and sufficient adsorption sites for Na^(+),which improves the possibility of Ti_(3)C_(2) for accommodating more Na atoms,further enhancing the Na^(+) storage capability of Ti_(3)C_(2).As revealed,Ti_(3)C_(2)-N_(funct) not only possesses a lower Na-ion diffusion energy barrier and charge trans-fer activation energy,but also exhibits Na^(+)-solvent co-intercalation behavior to circumvent a high de-solvation energy barrier at low-T.Besides,the solid electrolyte interface dominated by inorganic com-pounds is more beneficial for the Na^(+)transfer at the electrode/electrolyte interface.Compared with of the unmodified sample,Ti_(3)C_(2)-Nfunct exhibits a twofold capacity(201 mAh g^(-1)),fast-charging ability(18 min at 80% capacity retention),and great superiority in cycle life(80.9%@5000 cycles)at -25℃.When coupling with Na_(3)V_(2)(PO_(4))_(2)F_(3) cathode,the Ti_(3)C_(2)-N_(funct)//NVPF exhibits high energy density and cycle stability at -25℃.展开更多
The structural,morphological and optical properties of single-phase polycrystalline La2-xSrxNiMnO6(x=0,0.3 and 0.5),synthesized by solid state reaction were investigated.The samples were characterized by X-ray diffrac...The structural,morphological and optical properties of single-phase polycrystalline La2-xSrxNiMnO6(x=0,0.3 and 0.5),synthesized by solid state reaction were investigated.The samples were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM)/energy dispersive analysis of X-rays(EDAX),Raman spectroscopy and diffuse reflectance spectroscopy(DRS)to elucidate the role of A-site Sr-doping in double perovskite La2 NiMnO6.Rietveld analysis of XRD patterns revealed that all the samples have monoclinic structure with space group P21/n.Positive gradient in the Williamson Hall plots revealed the presence of tensile strain in all the samples.The morphological studies revealed that average grain size increases along with appreciable decrease in porosity with Sr doping.The Ni/Mn antisite disorder was introduced in the La2 NiMnO6 by Sr-doping confirmed by an increase in the full width at half maximum(FWHM)and decrease in intensity of the Raman modes at around 540 and 665 cm-1 which correspond to the antisymmetric stretching and symmetric stretching modes,respectively.DRS results reveal that the band gap in La2 NiMnO6 can be tuned down by Sr-doping to a value of1.37 eV(very close to 1.40 eV,considered as optimum value for better efficiency of a solar cell).Thus,Sr-doped La2 NiMnO6 may be of prime importance for applications in solar cells.展开更多
In this study. we have employed a facile oxalate-assisted hydrothermal approach to tailor the morphology of β-NaYF_4：Er^（3＋）,Yb^（3＋）（NYFEY） powders through the variation of the molar ratio of oxalate ions（O...In this study. we have employed a facile oxalate-assisted hydrothermal approach to tailor the morphology of β-NaYF_4：Er^（3＋）,Yb^（3＋）（NYFEY） powders through the variation of the molar ratio of oxalate ions（Oxa^（2-）） and rare earth ions（RE^（3＋）） in the range of 0.5：1.1：1.2：1, 5：1. and 10：1. The obtained results show that the crystallinity, particle size and upconversion luminescence intensity of the as-synthesized NYFEY particles are gradually decreased as the Oxa^（2-）：RE^（3＋） molar ratio increases from 0.5：1 to 10：1. For the purpose of photoelectrochemical performance evaluation,the as-synthesized NYFEY particles with different morphologies are incorporated into the nanocrystalline TiO2 films to form the multifunctional nano-and sub-micro meter composite photoanodes of dye-sensitized solar cells（DSSCs）. A short-circuit current density（Jsc） of 14.26 mA/cm^2 and power conversion efficiency（PCE） of 7.31% are obtained for DSSCs prepared with hexagonal rod-like NYFEY crystals,evidencing an increase of 29.8% compared with DSSCs prepared with only TiO_2 nanoparticles. The demonstrated synthesis approach for tailoring the morphology and size of NYFEY particles and enhancing the performance of DSSCs can also be applied for other types of solar cells.展开更多
Fatigue crack growth as a function ofαphase volume fraction in Ti-6Al-2Sn-4Zr-2Mo（Ti-6242）alloy was investigated using fatigue testing,optical microscopy,scanning electron microscopy,and transmission electron micro...Fatigue crack growth as a function ofαphase volume fraction in Ti-6Al-2Sn-4Zr-2Mo（Ti-6242）alloy was investigated using fatigue testing,optical microscopy,scanning electron microscopy,and transmission electron microscopy.Theα＋βannealing treatments with different solid solution temperatures and cooling rates were conducted in order to tailor microstructure with differentαphase features in the Ti-6242 alloy,and fatigue crack growth mechanism was discussed after detailed microstructure characterization.The results showed that fatigue crack growth rate of Ti-6242 alloy decreased with the decrease in volume fraction of the primaryαphase（αp）.Samples with a large-sizedαgrain microstructure treated at high solid solution temperature and slow cooling rate have lower fatigue crack growth rate.The appearance of secondaryαphase（αs）with the increase of solid solution temperature led to crack deflection.Moreover,a fatigue crack growth transition phenomenon was observed in the Paris regime of Ti-6242 alloy with 29.8% αp（typical bi-modal microstructure）and large-sizedαgrain microstructure,owing to the change of fatigue crack growth mechanism.展开更多
Camptothecin is a complex monoterpenoid indole alkaloid with remarkable antitumor activity.Given that two C-10 modified camptothecin derivatives,topotecan and irinotecan,have been approved as potent anticancer agents,...Camptothecin is a complex monoterpenoid indole alkaloid with remarkable antitumor activity.Given that two C-10 modified camptothecin derivatives,topotecan and irinotecan,have been approved as potent anticancer agents,there is a critical need for methods to access other aromatic ringfunctionalized congeners(e.g.,C-9,C-10,etc.).However,contemporary methods for chemical oxidation are generally harsh and low-yielding when applied to the camptothecin scaffold,thereby limiting the development of modified derivatives.Reported herein,we have identified four tailoring enzymes responsible for C-9 modifications of camptothecin from Nothapodytes tomentosa,via metabolomic and transcriptomic analysis.These consist of a cytochrome P450(Nt CPT9H)which catalyzes the regioselective oxidation of camptothecin to 9-hydroxycamptothecin,as well as two methyltransferases(Nt OMT1/2,converting 9-hydroxycamptothecin to 9-methoxycamptothecin),and a uridine diphosphate-glycosyltransferase(Nt UGT5,decorating 9-hydroxycamptothecin to9-β-D-glucosyloxycamptothecin).Importantly,the critical residues that contribute to the specific catalytic activity of Nt CPT9H have been elucidated through molecular docking and mutagenesis experiments.This work provides a genetic basis for producing camptothecin derivatives through metabolic engineering.This will hasten the discovery of novel C-9 modified camptothecin derivatives,with profound implications for pharmaceutical manufacture.展开更多
Due to its fascinating and tunable optoelectronic properties,semiconductor nanomaterials are the best choices for multidisciplinary applications.Particularly,the use of semiconductor photocatalysts is one of the promi...Due to its fascinating and tunable optoelectronic properties,semiconductor nanomaterials are the best choices for multidisciplinary applications.Particularly,the use of semiconductor photocatalysts is one of the promising ways to harness solar energy for useful applications in the field of energy and environment.In recent years,metal oxide-based tailored semiconductor photocatalysts have extensively been used for photocatalytic conversion of carbon dioxide(CO_(2))into fuels and other useful products utilizing solar energy.This is very significant not only from renewable energy consumption but also from reducing global warming point of view.Such current research activities are promising for a better future of society.The present mini-review is focused on recent developments(2–3 years)in metal oxide semiconductor hybrid photocatalysts-based photo-electrochemical conversion of CO_(2)into fuels and other useful products.First,general mechanism of photo-electrochemical conversion of CO_(2)into fuels or other useful products has been discussed.Then,various metal oxide-based emerging hybrid photocatalysts including tailoring of their morphological,compositional,and optoelectronic properties have been discussed with emphasis on their role in enhancing photoelectrochemical efficienty.Afterwards,mechanism of their photo-electrochemical reactions and applications in CO_(2)conversion into fuels/other useful products have been discussed.Finally,challenges and future prospects have been discussed followed by a summary.展开更多
基金supported financially by the National Natural Science Foundation of China (Nos. 51801148, 51671159)the China Postdoctoral Science Foundation (No. 2018M631151)+2 种基金the National Basic Research Program of China (No. 2013CB035701)the Fundamental Research Funds for the Central Universitiesthe National Program for Support of Top-notch Young Professionals
文摘Nanostructured thermal barrier coatings(TBCs) often provide high degradation resistance, as well as extended lifetime. However, the underlying mechanism has not been fully understood. In this study, the sintering characteristics of nanostructured yttria-stabilized zirconia(YSZ) coatings were investigated,and compared with those of the conventional YSZ coatings. Multiscale characterizations of the changes in microstructures and properties were performed. Results showed that the enhanced high-performance durability was mainly attributed to different sintering mechanisms of lamellar zones and nanozones.Sintering characteristics of the lamellar zones were similar to those of the conventional coatings. Stagesensitive healing of two-dimensional(2 D) pores dominated the sintering behavior of the lamellar zones.However, the differential densification rates between nanozones and lamellar zones of the nanostructured TBCs led to the formation of coarse voids. This counteractive effect, against healing of 2 D pores, was the main factor contributing to the retardation of the performance degradation of bimodal TBCs during thermal exposure. Based on the understanding of the performance-degradation resistance, an outlook towards TBCs with higher performances was presented.
基金supported by the National Natural Science Foundation of China(Nos.52073299,52172077,U22A20129,and 51902329)the National Key R&D Program of China(No.2022YFB3706303)the Youth Innovation Promotion Association CAS(No.2018289).
文摘Poor flowability of printable powders and long preparation cycles are the main challenges in the selective laser sintering(SLS)of chopped carbon fiber(C_(f))reinforced silicon carbide(SiC)composites with complex structures.In this study,we develop an efficient and novel processing route in the fabrication of lightweight SiC composites via the SLS of phenolic resin(PR)and Cr powders with the addition of a-SiC particles combined with the one-step reactive melt infiltration(RMI).The effects of a-SiC addition on the microstructural evolution of the C_(f)/SiC/PR printed bodies,C_(f)/SiC/C green bodies,and derived SiC composites were investigated.The results indicate that the added a-SiC particles play an important role in enhancing the flowability of raw powders,reducing the porosity.increasing the reliability of the C/SiC/C green bodies,and contributing to improving the microstructure homogeneity and mechanical properties of the SiC composites.The maximum density,flexural strength,and fracture toughness(Kic)of the SiC composites are 2.749±0.006 g·cm^(3),266±5 MPa,and 3.30±0.06 MPa-m,respectively.The coefficient of thermal expansion(CTE,a)of the SiC composites is approximately 4.29×10^(-6)K^(-1)from room temperature(RT)to 900℃,and the thermal conductivity(x)is in the range of 80.15-92.48 W·m^(-1)·K^(-1)at RT.The high-temperature strength of the SiC composites increase to 287±18 MPa up to 1200℃.This study provides a novel as well as feasible tactic for the preparation of high-quality printable powders as well as lightweight,high-strength,and high-x SiC composites with complex structures by the SLS and RMI.
基金supports from the National Key R&D Program of China (No. 2021YFB2802000 and 2021YFB2800500)the National Natural Science Foundation of China (Grant Nos. U20A20211, 51902286, 61775192, 61905215, and 62005164)+2 种基金Key Research Project of Zhejiang Labthe State Key Laboratory of High Field Laser Physics (Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences)China Postdoctoral Science Foundation (2021M702799)。
文摘Long-term optical data storage(ODS)technology is essential to break the bottleneck of high energy consumption for information storage in the current era of big data.Here,ODS with an ultralong lifetime of 2×10^(7)years is attained with single ultrafast laser pulse induced reduction of Eu^(3+)ions and tailoring of optical properties inside the Eu-doped aluminosilicate glasses.We demonstrate that the induced local modifications in the glass can stand against the temperature of up to 970 K and strong ultraviolet light irradiation with the power density of 100 kW/cm^(2).Furthermore,the active ions of Eu^(2+)exhibit strong and broadband emission with the full width at half maximum reaching 190 nm,and the photoluminescence(PL)is flexibly tunable in the whole visible region by regulating the alkaline earth metal ions in the glasses.The developed technology and materials will be of great significance in photonic applications such as long-term ODS.
基金the National Natural Sci-ence Foundation of China(Grant Nos.21673064,51902072 and 22109033)Heilongjiang Touyan Team(Grant No.HITTY-20190033)+1 种基金Fundamental Research Funds for the Central Universities(Grant Nos.HIT.NSRIF.2019040 and 2019041)State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology)(Grant No.2020 DX11).
文摘Sodium-ion batteries stand a chance of enabling fast charging ability and long lifespan while operating at low temperature(low-T).However,sluggish kinetics and aggravated dendrites present two major challenges for anodes to achieve the goal at low-T.Herein,we propose an interlayer confined strategy for tailoring nitrogen terminals on Ti_(3)C_(2) MXene(Ti_(3)C_(2)-N_(funct)) to address these issues.The introduction of nitrogen terminals endows Ti_(3)C_(2)-N_(funct) with large interlayer space and charge redistribution,improved conductivity and sufficient adsorption sites for Na^(+),which improves the possibility of Ti_(3)C_(2) for accommodating more Na atoms,further enhancing the Na^(+) storage capability of Ti_(3)C_(2).As revealed,Ti_(3)C_(2)-N_(funct) not only possesses a lower Na-ion diffusion energy barrier and charge trans-fer activation energy,but also exhibits Na^(+)-solvent co-intercalation behavior to circumvent a high de-solvation energy barrier at low-T.Besides,the solid electrolyte interface dominated by inorganic com-pounds is more beneficial for the Na^(+)transfer at the electrode/electrolyte interface.Compared with of the unmodified sample,Ti_(3)C_(2)-Nfunct exhibits a twofold capacity(201 mAh g^(-1)),fast-charging ability(18 min at 80% capacity retention),and great superiority in cycle life(80.9%@5000 cycles)at -25℃.When coupling with Na_(3)V_(2)(PO_(4))_(2)F_(3) cathode,the Ti_(3)C_(2)-N_(funct)//NVPF exhibits high energy density and cycle stability at -25℃.
基金the full support from our Institute, National Institute of Technology SrinagarMinistry of Human Resource Development (MHRD) India, for the financial support
文摘The structural,morphological and optical properties of single-phase polycrystalline La2-xSrxNiMnO6(x=0,0.3 and 0.5),synthesized by solid state reaction were investigated.The samples were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM)/energy dispersive analysis of X-rays(EDAX),Raman spectroscopy and diffuse reflectance spectroscopy(DRS)to elucidate the role of A-site Sr-doping in double perovskite La2 NiMnO6.Rietveld analysis of XRD patterns revealed that all the samples have monoclinic structure with space group P21/n.Positive gradient in the Williamson Hall plots revealed the presence of tensile strain in all the samples.The morphological studies revealed that average grain size increases along with appreciable decrease in porosity with Sr doping.The Ni/Mn antisite disorder was introduced in the La2 NiMnO6 by Sr-doping confirmed by an increase in the full width at half maximum(FWHM)and decrease in intensity of the Raman modes at around 540 and 665 cm-1 which correspond to the antisymmetric stretching and symmetric stretching modes,respectively.DRS results reveal that the band gap in La2 NiMnO6 can be tuned down by Sr-doping to a value of1.37 eV(very close to 1.40 eV,considered as optimum value for better efficiency of a solar cell).Thus,Sr-doped La2 NiMnO6 may be of prime importance for applications in solar cells.
基金Project partially supported by the National Natural Science Foundation of China(51202179)the National Science and Technology Research Key Project of the Ministry of Education(212174)+1 种基金the Natural Science Foundation of Shaanxi Province(2013KJXX-57)the Science Foundation of Shaanxi Provincial Department of Education(12JS060,13JS053,14JS047,14JS048,16JS058)
文摘In this study. we have employed a facile oxalate-assisted hydrothermal approach to tailor the morphology of β-NaYF_4：Er^（3＋）,Yb^（3＋）（NYFEY） powders through the variation of the molar ratio of oxalate ions（Oxa^（2-）） and rare earth ions（RE^（3＋）） in the range of 0.5：1.1：1.2：1, 5：1. and 10：1. The obtained results show that the crystallinity, particle size and upconversion luminescence intensity of the as-synthesized NYFEY particles are gradually decreased as the Oxa^（2-）：RE^（3＋） molar ratio increases from 0.5：1 to 10：1. For the purpose of photoelectrochemical performance evaluation,the as-synthesized NYFEY particles with different morphologies are incorporated into the nanocrystalline TiO2 films to form the multifunctional nano-and sub-micro meter composite photoanodes of dye-sensitized solar cells（DSSCs）. A short-circuit current density（Jsc） of 14.26 mA/cm^2 and power conversion efficiency（PCE） of 7.31% are obtained for DSSCs prepared with hexagonal rod-like NYFEY crystals,evidencing an increase of 29.8% compared with DSSCs prepared with only TiO_2 nanoparticles. The demonstrated synthesis approach for tailoring the morphology and size of NYFEY particles and enhancing the performance of DSSCs can also be applied for other types of solar cells.
基金support of National Natural Science Foundation of China under Grant No.51401175the Research Fund for the Doctoral Program of China(No.20130162110005)
文摘Fatigue crack growth as a function ofαphase volume fraction in Ti-6Al-2Sn-4Zr-2Mo（Ti-6242）alloy was investigated using fatigue testing,optical microscopy,scanning electron microscopy,and transmission electron microscopy.Theα＋βannealing treatments with different solid solution temperatures and cooling rates were conducted in order to tailor microstructure with differentαphase features in the Ti-6242 alloy,and fatigue crack growth mechanism was discussed after detailed microstructure characterization.The results showed that fatigue crack growth rate of Ti-6242 alloy decreased with the decrease in volume fraction of the primaryαphase（αp）.Samples with a large-sizedαgrain microstructure treated at high solid solution temperature and slow cooling rate have lower fatigue crack growth rate.The appearance of secondaryαphase（αs）with the increase of solid solution temperature led to crack deflection.Moreover,a fatigue crack growth transition phenomenon was observed in the Paris regime of Ti-6242 alloy with 29.8% αp（typical bi-modal microstructure）and large-sizedαgrain microstructure,owing to the change of fatigue crack growth mechanism.
基金supported by National Natural Science Foundation of China(82225043)Biological Resources Program(KFJBRP-009)+1 种基金Yunnan Revitalization Talent Support Program“Yunling Scholar”Project(S.-X.H.)Yunnan Revitalization Talent Support Program“Young Talent”Project(J.-P.H.)。
文摘Camptothecin is a complex monoterpenoid indole alkaloid with remarkable antitumor activity.Given that two C-10 modified camptothecin derivatives,topotecan and irinotecan,have been approved as potent anticancer agents,there is a critical need for methods to access other aromatic ringfunctionalized congeners(e.g.,C-9,C-10,etc.).However,contemporary methods for chemical oxidation are generally harsh and low-yielding when applied to the camptothecin scaffold,thereby limiting the development of modified derivatives.Reported herein,we have identified four tailoring enzymes responsible for C-9 modifications of camptothecin from Nothapodytes tomentosa,via metabolomic and transcriptomic analysis.These consist of a cytochrome P450(Nt CPT9H)which catalyzes the regioselective oxidation of camptothecin to 9-hydroxycamptothecin,as well as two methyltransferases(Nt OMT1/2,converting 9-hydroxycamptothecin to 9-methoxycamptothecin),and a uridine diphosphate-glycosyltransferase(Nt UGT5,decorating 9-hydroxycamptothecin to9-β-D-glucosyloxycamptothecin).Importantly,the critical residues that contribute to the specific catalytic activity of Nt CPT9H have been elucidated through molecular docking and mutagenesis experiments.This work provides a genetic basis for producing camptothecin derivatives through metabolic engineering.This will hasten the discovery of novel C-9 modified camptothecin derivatives,with profound implications for pharmaceutical manufacture.
基金supported financially by Department of Science and Techanology,India,Institut National de la Recherche Scientifique(INRS),andÉcole de Technologie Supérieure(ÉTS),the Marcelle-Gauvreau Engineering Research Chair program。
文摘Due to its fascinating and tunable optoelectronic properties,semiconductor nanomaterials are the best choices for multidisciplinary applications.Particularly,the use of semiconductor photocatalysts is one of the promising ways to harness solar energy for useful applications in the field of energy and environment.In recent years,metal oxide-based tailored semiconductor photocatalysts have extensively been used for photocatalytic conversion of carbon dioxide(CO_(2))into fuels and other useful products utilizing solar energy.This is very significant not only from renewable energy consumption but also from reducing global warming point of view.Such current research activities are promising for a better future of society.The present mini-review is focused on recent developments(2–3 years)in metal oxide semiconductor hybrid photocatalysts-based photo-electrochemical conversion of CO_(2)into fuels and other useful products.First,general mechanism of photo-electrochemical conversion of CO_(2)into fuels or other useful products has been discussed.Then,various metal oxide-based emerging hybrid photocatalysts including tailoring of their morphological,compositional,and optoelectronic properties have been discussed with emphasis on their role in enhancing photoelectrochemical efficienty.Afterwards,mechanism of their photo-electrochemical reactions and applications in CO_(2)conversion into fuels/other useful products have been discussed.Finally,challenges and future prospects have been discussed followed by a summary.
