A TiAl-Nb composite was prepared by spark plasma sintering （SPS） at 1250 °C and 50 MPa for 5 min from prealloyed TiAl powder and elemental Nb powder in a molar ratio of 9：1 for improving the fracture toughness...A TiAl-Nb composite was prepared by spark plasma sintering （SPS） at 1250 °C and 50 MPa for 5 min from prealloyed TiAl powder and elemental Nb powder in a molar ratio of 9：1 for improving the fracture toughness of TiAl alloy at room temperature. The microstructure, phase constitute, fracture surface and fracture toughness were determined by X-ray diffractometry, electron probe micro-analysis, scanning and transmission electron microscopy and mechanical testing. The results show that the sintered samples mainly consist of γ phase, O phase, niobium solid solution （Nbss） phase and B2 phase. The fracture toughness is as high as 28.7 MPa？m1/2 at room temperature. The ductile Nbss phase plays an important role in absorbing the fracture energy in front of the cracks. Moreover, B2 phase can branch the propagation of the cracks. The microhardness of each phase of the composite was also tested.展开更多
Ignition energy is one of tbe important parameters of flammable materials, and evaluating ignition energy precisely is essential to the safety of process industry and combustion science and technology. By using electr...Ignition energy is one of tbe important parameters of flammable materials, and evaluating ignition energy precisely is essential to the safety of process industry and combustion science and technology. By using electric spark discharge test system, a series of electric spark discharge experiments were conducted with the capacitor-stored energy in the range of 10 J, 100 J, and 1000 J, respectively. The evaluation method for energy consumed by electric spark, wire, and switch during capacitor discharge process has been studied respectively. The resistance of wire, switch, and plasma between electrodes has been evaluated by different methods and an optimized evaluation method has been obtained. The electric energy consumed by wire, electric switch, and electric spark-induced plasma between electrodes were obtained and the energy structure of capacitor-released energy was analyzed. The dynamic process and the characteristic parameters （the maximum power, duration of discharge process） of electric spark discharge process have been analyzed. Experimental results showed that, electric spark-consumed energy only accounts for 8%-14% of the capacitor-released energy. With the increase of capacitor-released energy, the duration of discharge process becomes longer, and the energy of plasma accounts for more in the capacitor-released energy. The power of electric spark varies with time as a damped sinusoids function and the period and the maximum value increase with the capacitor-released energy.展开更多
This is the twinned paper of the increased mass paper, “Gravity is acting at superluminous infinite speed, thus collapsing special theory of relativity of Einstein, an explanation for almost everything (according to ...This is the twinned paper of the increased mass paper, “Gravity is acting at superluminous infinite speed, thus collapsing special theory of relativity of Einstein, an explanation for almost everything (according to the authors’ rigorous mathematical proof and overwhelming experimental evidence)"?[1]. In the present paper, we describe the repeated spark or repeat current in terms of the hidden, Non-Relativistic Longitudinal Cardinal Ampere Force which is not found yet infallible for every case. The impressive finding is the fact that these repeated sparks as we shall see, have no back-emf, but forward-emf and forward-Ampere-motive-force. The only consumption is the resistive load with the very high currents needed. This means its total energy consumption is less than the released energy-output work plus heat, plus the energy recharging the batteries. All these are in excess of the consumed input energy. This means the Repeated sparking is “over-unity” efficiency and that, using super-conductive materials, we shall have constructed the first “perpetual mobile” plus producing extra electrical energy. Several previous journals that we did not mention here their names did not dare to publish our disliked papers of very important and revolutionary results but were not able to counter argue our arguments. They preferred the silence and have not answered us at all for many years now. Even some of them were involved previously with the repeated sparking which is the same topic of our present paper.展开更多
Al-xV alloys(x=2 at.%,5 at.%,10 at.%)with nanocrystalline structure and high solid solubility of V were produced in powder form by high-energy ball milling(HEBM).The alloy powders were consolidated by spark plasma sin...Al-xV alloys(x=2 at.%,5 at.%,10 at.%)with nanocrystalline structure and high solid solubility of V were produced in powder form by high-energy ball milling(HEBM).The alloy powders were consolidated by spark plasma sintering(SPS)employing a wide range of temperatures ranging from 200 to 400°C.The microstructure and solid solubility of V in Al were investigated using X-ray diffraction analysis,scanning electron microscope and transmission electron microscope.The microstructure was influenced by the SPS temperature and V content of the alloy.The alloys exhibited high solid solubility of V–six orders of magnitude higher than that in equilibrium state and grain size<50 nm at all the SPS temperatures.The formation of Al3V intermetallic was detected at 400℃.Formation of a V-lean phase and bimodal grain size was observed during SPS,which increased with the increase in SPS temperature.The hardness and elastic modulus,measured using nanoindentation,were significantly higher than commercial alloys.For example,Al-V alloy produced by SPS at 200℃ exhibited a hardness of 5.21 GPa along with elastic modulus of 96.21 GPa.The evolution of the microstructure and hardness with SPS temperatures has been discussed.展开更多
基金Project (2011CB605505) supported by the National Basic Research Program of ChinaProject (2008AA03A233) supported by the Hi-tech Research and Development Program of China
文摘A TiAl-Nb composite was prepared by spark plasma sintering （SPS） at 1250 °C and 50 MPa for 5 min from prealloyed TiAl powder and elemental Nb powder in a molar ratio of 9：1 for improving the fracture toughness of TiAl alloy at room temperature. The microstructure, phase constitute, fracture surface and fracture toughness were determined by X-ray diffractometry, electron probe micro-analysis, scanning and transmission electron microscopy and mechanical testing. The results show that the sintered samples mainly consist of γ phase, O phase, niobium solid solution （Nbss） phase and B2 phase. The fracture toughness is as high as 28.7 MPa？m1/2 at room temperature. The ductile Nbss phase plays an important role in absorbing the fracture energy in front of the cracks. Moreover, B2 phase can branch the propagation of the cracks. The microhardness of each phase of the composite was also tested.
基金supported by the National Natural Science Foundation of China(Grant No.11572044)the National Key Research and Development Program of China(Grant No.2017YFC0804705)
文摘Ignition energy is one of tbe important parameters of flammable materials, and evaluating ignition energy precisely is essential to the safety of process industry and combustion science and technology. By using electric spark discharge test system, a series of electric spark discharge experiments were conducted with the capacitor-stored energy in the range of 10 J, 100 J, and 1000 J, respectively. The evaluation method for energy consumed by electric spark, wire, and switch during capacitor discharge process has been studied respectively. The resistance of wire, switch, and plasma between electrodes has been evaluated by different methods and an optimized evaluation method has been obtained. The electric energy consumed by wire, electric switch, and electric spark-induced plasma between electrodes were obtained and the energy structure of capacitor-released energy was analyzed. The dynamic process and the characteristic parameters （the maximum power, duration of discharge process） of electric spark discharge process have been analyzed. Experimental results showed that, electric spark-consumed energy only accounts for 8%-14% of the capacitor-released energy. With the increase of capacitor-released energy, the duration of discharge process becomes longer, and the energy of plasma accounts for more in the capacitor-released energy. The power of electric spark varies with time as a damped sinusoids function and the period and the maximum value increase with the capacitor-released energy.
文摘This is the twinned paper of the increased mass paper, “Gravity is acting at superluminous infinite speed, thus collapsing special theory of relativity of Einstein, an explanation for almost everything (according to the authors’ rigorous mathematical proof and overwhelming experimental evidence)"?[1]. In the present paper, we describe the repeated spark or repeat current in terms of the hidden, Non-Relativistic Longitudinal Cardinal Ampere Force which is not found yet infallible for every case. The impressive finding is the fact that these repeated sparks as we shall see, have no back-emf, but forward-emf and forward-Ampere-motive-force. The only consumption is the resistive load with the very high currents needed. This means its total energy consumption is less than the released energy-output work plus heat, plus the energy recharging the batteries. All these are in excess of the consumed input energy. This means the Repeated sparking is “over-unity” efficiency and that, using super-conductive materials, we shall have constructed the first “perpetual mobile” plus producing extra electrical energy. Several previous journals that we did not mention here their names did not dare to publish our disliked papers of very important and revolutionary results but were not able to counter argue our arguments. They preferred the silence and have not answered us at all for many years now. Even some of them were involved previously with the repeated sparking which is the same topic of our present paper.
基金the financial support received from the National Science Foundation(Nos.NSF-CMMI 1760204 and 2131440)under the direction of Dr.Alexis Lewissupported by the State of North Carolina and the National Science Foundation(No.ECCS-1542015)support from the National Science Foundation(DMR1726294)。
文摘Al-xV alloys(x=2 at.%,5 at.%,10 at.%)with nanocrystalline structure and high solid solubility of V were produced in powder form by high-energy ball milling(HEBM).The alloy powders were consolidated by spark plasma sintering(SPS)employing a wide range of temperatures ranging from 200 to 400°C.The microstructure and solid solubility of V in Al were investigated using X-ray diffraction analysis,scanning electron microscope and transmission electron microscope.The microstructure was influenced by the SPS temperature and V content of the alloy.The alloys exhibited high solid solubility of V–six orders of magnitude higher than that in equilibrium state and grain size<50 nm at all the SPS temperatures.The formation of Al3V intermetallic was detected at 400℃.Formation of a V-lean phase and bimodal grain size was observed during SPS,which increased with the increase in SPS temperature.The hardness and elastic modulus,measured using nanoindentation,were significantly higher than commercial alloys.For example,Al-V alloy produced by SPS at 200℃ exhibited a hardness of 5.21 GPa along with elastic modulus of 96.21 GPa.The evolution of the microstructure and hardness with SPS temperatures has been discussed.
