Lipid droplets(LDs)are dynamic organelles interacting with a variety of intracellular organelles.Tracking intracellular LD dynamics employing synthetic small molecules is crucial for biological studies.Fluorescence im...Lipid droplets(LDs)are dynamic organelles interacting with a variety of intracellular organelles.Tracking intracellular LD dynamics employing synthetic small molecules is crucial for biological studies.Fluorescence imaging in the red and near infrared(NIR)region is more suitable for biological imaging due to its low phototoxicity and high signal-to-noise ratio.However,available LD-dyes in the red region with remarkable environmental sensitivity,selectivity for LDs staining are limited.Here,we constructed a red-emission D-π-A-π type LDdye LD 688P with higher environmental sensitivity and suitable“calculated log P”(Clog P)for LDs dynamic imaging.LD 688P was proved to be highly selective and photostable for tracing LD fusion including multiple consecutive fusions and fusions in a centrosymmetric manner by super-resolution microscopy.We believe that the D-π-A-π skeleton would be an efficient strategy to construct red and even NIR-emission dyes.展开更多
We report red-emission organic light-emitting diodes (OLEDs) based on solution-processable organic molecules with triphenylamine (TPA) as core and benzothiadiazole-(4-hexyl)thiophene (BT-4HT) as arms.Bi-armed molecule...We report red-emission organic light-emitting diodes (OLEDs) based on solution-processable organic molecules with triphenylamine (TPA) as core and benzothiadiazole-(4-hexyl)thiophene (BT-4HT) as arms.Bi-armed molecule B(TPA-BT-4HT) and star-shaped (tri-armed) molecule S(TPA-BT-4HT) both show pure red-emission peaked at 646 and 657 nm,respectively.The red-emission OLED with S(TPA-BT-4HT) as the emitting layer displays a higher maximum luminance of ca.7794 cd/m2 and a maximum EL efficiency of 0.91 cd/A.展开更多
Two soluble copolymers of fluorenone and dioctoxylbenzene （PFN） or anthracene （PFNAn） were synthesized through Heck polymerization, and were characterized by gel permeation chromatography （GPC）, FT-IR, IH-NMR, e...Two soluble copolymers of fluorenone and dioctoxylbenzene （PFN） or anthracene （PFNAn） were synthesized through Heck polymerization, and were characterized by gel permeation chromatography （GPC）, FT-IR, IH-NMR, elemental analysis and thermogravimetric analysis. The polymers possess good solubility in common organic solvents and high thermal stability with the Onset decomposition temperature at higher than 410 ℃. The photophysical properties of the polymers were investigated in both solutions and spin-coated films. Cyclic voltammetry results revealed that the copolymers possess higher electron affinity and reversible reduction/re-oxidation processes. Their electroluminescent properties were further investigated. PFN and PFNAn show stable and saturated red light emission with high thermal stability and high electron injection ability. This type of conjugated polymers may be promising for the applications as electron acceptors in polymer photovoltaic cells and electron transporting materials.展开更多
In order to use organic light emitting devices (OLEDs) in display application , it is very important to obtain red emitting light. There are two methods for obtaining red emitting light: doping high fluorescent dyes i...In order to use organic light emitting devices (OLEDs) in display application , it is very important to obtain red emitting light. There are two methods for obtaining red emitting light: doping high fluorescent dyes in host or using metal complexes. Phosphorescent dyes has been used efficiently recently. In this letter, we demonstrate red organic light emitting devices (OLED) with the electroluminescent layers consisting of aluminum tris(8 hydroxyquinoline) (Alq 3) doped with the dye DCM and DCJTB, which the emission color depends on the concentration of DCM and DCJTB. The typical cell structure is as follows: [ITO/ hole transport layer (60nm, TPD) /emitting layer(60nm, Alq 3 + red dopant) /LiF(0.5～2nm) /Al(150nm)]. For DCM doped devices, the maximum luminance of 148000cd/m 2 (chromaticity coordinates: x =0.51, y =0.47) and 5730cd/m 2 (chromaticity coordinates: x =0.58, y =0.42) are measured for DCM concentration of 0.2% and 2% in Alq 3, respectively; and for DCJTB doped devices, 17400 cd/m 2 (chromaticity coordinates : x =0.51, y =0.46) and 3846cd/m 2 (chromaticity coordinates: x =0. 63, y =0. 37) are obtained for DCJTB concentration of 0. 2 % and 2% in Alq 3, respectively.展开更多
采用高温固相法合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)单掺杂和双掺杂荧光粉,并通过X射线衍射、扫描电镜、荧光光谱等测试方法对荧光粉的物相结构、形貌和发光特性进行了表征及...采用高温固相法合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)单掺杂和双掺杂荧光粉,并通过X射线衍射、扫描电镜、荧光光谱等测试方法对荧光粉的物相结构、形貌和发光特性进行了表征及分析。结果表明:成功合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)荧光粉且均为纯相;样品的粒径为1~2μm;La_(2)MgTiO_(6)∶Mn^(4+)在650~750 nm的红光发射是来自Mn^(4+)的2 E 1→4 A 2跃迁,La_(2)MgTiO_(6)∶Pr^(3+)在红光区域600~660 nm具有强烈的发射,归属为Pr^(3+)的3 P 0→3 H 6和3 P 0→3 F 2跃迁。当Mn^(4+)与Pr^(3+)共同掺杂于La_(2)MgTiO_(6)时,来自Mn^(4+)、Pr^(3+)不同波段的红光发射使荧光粉的发射光谱与植物光敏色素P r与P fr吸收光谱的重叠程度大幅增加,表明Mn^(4+)、Pr^(3+)共掺有效拓宽了La_(2)MgTiO_(6)荧光粉的红光发射区域,更符合植物照明的需求,在LED植物照明领域具有更明显的潜在应用价值。展开更多
基金supported by the National Natural Science Foundation of China(22078314,21878286,and 21908216)Dalian Institute of Chemical Physics(DICPI202142,DICPI201938,and DICPZZBS201805)+1 种基金the support from A^(*)STAR under its Advanced Manufacturing and Engineering Program(A2083c0051)the Ministry of Education,Singapore(MOE-MOET2EP10120-0007)
文摘Lipid droplets(LDs)are dynamic organelles interacting with a variety of intracellular organelles.Tracking intracellular LD dynamics employing synthetic small molecules is crucial for biological studies.Fluorescence imaging in the red and near infrared(NIR)region is more suitable for biological imaging due to its low phototoxicity and high signal-to-noise ratio.However,available LD-dyes in the red region with remarkable environmental sensitivity,selectivity for LDs staining are limited.Here,we constructed a red-emission D-π-A-π type LDdye LD 688P with higher environmental sensitivity and suitable“calculated log P”(Clog P)for LDs dynamic imaging.LD 688P was proved to be highly selective and photostable for tracing LD fusion including multiple consecutive fusions and fusions in a centrosymmetric manner by super-resolution microscopy.We believe that the D-π-A-π skeleton would be an efficient strategy to construct red and even NIR-emission dyes.
基金supported by the National Natural Science Foundation of China (50633050,50803071 and 20721061)
文摘We report red-emission organic light-emitting diodes (OLEDs) based on solution-processable organic molecules with triphenylamine (TPA) as core and benzothiadiazole-(4-hexyl)thiophene (BT-4HT) as arms.Bi-armed molecule B(TPA-BT-4HT) and star-shaped (tri-armed) molecule S(TPA-BT-4HT) both show pure red-emission peaked at 646 and 657 nm,respectively.The red-emission OLED with S(TPA-BT-4HT) as the emitting layer displays a higher maximum luminance of ca.7794 cd/m2 and a maximum EL efficiency of 0.91 cd/A.
基金Projects(50803074, 50633050) supported by the National Natural Science Foundation of ChinaProject supported by the Opening Fund of State Key Laboratory of Powder MetallurgyStart-up Fund of Central South University, China
文摘Two soluble copolymers of fluorenone and dioctoxylbenzene （PFN） or anthracene （PFNAn） were synthesized through Heck polymerization, and were characterized by gel permeation chromatography （GPC）, FT-IR, IH-NMR, elemental analysis and thermogravimetric analysis. The polymers possess good solubility in common organic solvents and high thermal stability with the Onset decomposition temperature at higher than 410 ℃. The photophysical properties of the polymers were investigated in both solutions and spin-coated films. Cyclic voltammetry results revealed that the copolymers possess higher electron affinity and reversible reduction/re-oxidation processes. Their electroluminescent properties were further investigated. PFN and PFNAn show stable and saturated red light emission with high thermal stability and high electron injection ability. This type of conjugated polymers may be promising for the applications as electron acceptors in polymer photovoltaic cells and electron transporting materials.
文摘In order to use organic light emitting devices (OLEDs) in display application , it is very important to obtain red emitting light. There are two methods for obtaining red emitting light: doping high fluorescent dyes in host or using metal complexes. Phosphorescent dyes has been used efficiently recently. In this letter, we demonstrate red organic light emitting devices (OLED) with the electroluminescent layers consisting of aluminum tris(8 hydroxyquinoline) (Alq 3) doped with the dye DCM and DCJTB, which the emission color depends on the concentration of DCM and DCJTB. The typical cell structure is as follows: [ITO/ hole transport layer (60nm, TPD) /emitting layer(60nm, Alq 3 + red dopant) /LiF(0.5～2nm) /Al(150nm)]. For DCM doped devices, the maximum luminance of 148000cd/m 2 (chromaticity coordinates: x =0.51, y =0.47) and 5730cd/m 2 (chromaticity coordinates: x =0.58, y =0.42) are measured for DCM concentration of 0.2% and 2% in Alq 3, respectively; and for DCJTB doped devices, 17400 cd/m 2 (chromaticity coordinates : x =0.51, y =0.46) and 3846cd/m 2 (chromaticity coordinates: x =0. 63, y =0. 37) are obtained for DCJTB concentration of 0. 2 % and 2% in Alq 3, respectively.
文摘采用高温固相法合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)单掺杂和双掺杂荧光粉,并通过X射线衍射、扫描电镜、荧光光谱等测试方法对荧光粉的物相结构、形貌和发光特性进行了表征及分析。结果表明:成功合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)荧光粉且均为纯相;样品的粒径为1~2μm;La_(2)MgTiO_(6)∶Mn^(4+)在650~750 nm的红光发射是来自Mn^(4+)的2 E 1→4 A 2跃迁,La_(2)MgTiO_(6)∶Pr^(3+)在红光区域600~660 nm具有强烈的发射,归属为Pr^(3+)的3 P 0→3 H 6和3 P 0→3 F 2跃迁。当Mn^(4+)与Pr^(3+)共同掺杂于La_(2)MgTiO_(6)时,来自Mn^(4+)、Pr^(3+)不同波段的红光发射使荧光粉的发射光谱与植物光敏色素P r与P fr吸收光谱的重叠程度大幅增加,表明Mn^(4+)、Pr^(3+)共掺有效拓宽了La_(2)MgTiO_(6)荧光粉的红光发射区域,更符合植物照明的需求,在LED植物照明领域具有更明显的潜在应用价值。
