A variational technique (VT) is applied to estimate surface sensible and latent heat fluxes based on observations of air temperature, wind speed, and humidity, respectively, at three heights (1 m, 4 m, and 10 m), and ...A variational technique (VT) is applied to estimate surface sensible and latent heat fluxes based on observations of air temperature, wind speed, and humidity, respectively, at three heights (1 m, 4 m, and 10 m), and the surface energy and radiation budgets by the surface energy and radiation system (SERBS). The method fully uses all information provided by the measurements of air temperature, wind, and humidity profiles, the surface energy budget, and the similarity profile formulae as well. Data collected at Feixi experiment station installed by the China Heavy Rain Experiment and Study (HeRES) Program are used to test the method. Results show that the proposed technique can overcome the well-known unstablility problem that occurs when the Bowen method becomes singular; in comparison with the profile method, it reduces both the sensitivities of latent heat fluxes to observational errors in humidity and those of sensible heat fluxes to observational errors in temperature, while the estimated heat fluxes approximately satisfy the surface energy budget. Therefore, the variational technique is more reliable and stable than the two conventional methods in estimating surface sensible and latent heat fluxes.展开更多
Statistical inference on parametric part for the partially linear single-index model (PLSIM) is considered in this paper. A profile least-squares technique for estimating the parametric part is proposed and the asympt...Statistical inference on parametric part for the partially linear single-index model (PLSIM) is considered in this paper. A profile least-squares technique for estimating the parametric part is proposed and the asymptotic normality of the profile least-squares estimator is given. Based on the estimator, a generalized likelihood ratio (GLR) test is proposed to test whether parameters on linear part for the model is under a contain linear restricted condition. Under the null model, the proposed GLR statistic follows asymptotically the χ2-distribution with the scale constant and degree of freedom independent of the nuisance parameters, known as Wilks phenomenon. Both simulated and real data examples are used to illustrate our proposed methods.展开更多
The ^(nat)Mo(γ,xnp)^(95m,g)Nb photonuclear reaction was studied using the electron beam from the NSC KIPT linear accelerator LUE-40.The experiment was performed using the activation and off-line γ-ray spectrometric ...The ^(nat)Mo(γ,xnp)^(95m,g)Nb photonuclear reaction was studied using the electron beam from the NSC KIPT linear accelerator LUE-40.The experiment was performed using the activation and off-line γ-ray spectrometric technique.The experimental isomeric yield ratio(IR) was determined for the reaction products ^(95m,g)Nb at the bremsstrahlung end-point energy E_(γmax) range of 38-93 MeV.The obtained values of IR are in satisfactory agreement with the results of other studies and extend the range of previously known data.The theoretical values of the yields Y_(m,g)(E_(γmax)) and the IR for the isomeric pair ^(95m,g)Nb from the ^(nat)Mo(γ,xnp) reaction were calculated using the partial cross-sections σ(E) from the TALYS1.95 code for six different level density models.For the investigated range of E_(γmax),the theoretical dependence of IR on energy was confirmed-the IR smoothly increases with increasing energy.The comparison showed a noticeable difference(more than 3.85 times) in the experimental IR relative to all theoretical estimates.展开更多
The photoneutron reaction^(18)Ta(y,3m)(178m,g)Ta was investigated with the beam from the NSC KIPT electron linear accelerator LUE-40.The measurements were performed using the residual y-activity method.The bremsstrahl...The photoneutron reaction^(18)Ta(y,3m)(178m,g)Ta was investigated with the beam from the NSC KIPT electron linear accelerator LUE-40.The measurements were performed using the residual y-activity method.The bremsstrahlung flux-averaged cross sections((E_(γmax))>.(r(E_(γmax))>m.<r(E_(γmax))g and the isomerie ratio of the re-action products d(E_(γmax))were measured.The theoretical values of the averaged cross-sections and isomeric ratio were calculated using the partial cross-sections from the TALYS1.95 code for different level density models LD 1-6..The obtained experimental d(E_(γmax))agree with the data in the lterature,but differ from the theoretical values in ab-solute magnitude and the behavior of the energy dependence.A comparison of the determined averaged cross-sec-tions with the calculated cross sections showed the best agreement for the case of the LD 5 model.展开更多
Zinc-aluminum alloys have been used as bearing materials in the past. In recent years, binary Al-Zn alloys and Al-Zn-Cu alloys are being used as an alternative to the Zn-Al alloys for bearing applications. In this stu...Zinc-aluminum alloys have been used as bearing materials in the past. In recent years, binary Al-Zn alloys and Al-Zn-Cu alloys are being used as an alternative to the Zn-Al alloys for bearing applications. In this study, both binary Al-25 Zn and Al-3 Cu were prepared using stir casting process. Homogenization of the as-cast alloys was performed at 350oC for 8 h and then, the alloys were furnace-cooled to 50oC. The homogenization led to the removal of the dendritic structure of the as-cast alloys. After homogenization, wear parameters optimization was carried out using Taguchi technique. For this purpose, L9 orthogonal array was selected, and the control parameters selected are load, velocity, and sliding distance. The optimum parametric condition was obtained using signal-to-noise(S/N) ratio analysis, and specific wear rate(SWR) is the selected response. The "smaller-the-better" is the goal of the experiment for S/N ratio analysis. After the optimization, confirmation tests were carried out using analysis of variance(ANOVA) from the developed regression equation. Finally, wear mechanism studies were conducted using scanning electron microscopy(SEM) and energy-dispersive X-ray spectroscopy(EDX) images.展开更多
基金This work was supported by the National Natural Science Foundation of China under Grant No.E-D0119-90202014the National Key Programme for Developing Basic Sciences of China under Great No.G1998040902.
文摘A variational technique (VT) is applied to estimate surface sensible and latent heat fluxes based on observations of air temperature, wind speed, and humidity, respectively, at three heights (1 m, 4 m, and 10 m), and the surface energy and radiation budgets by the surface energy and radiation system (SERBS). The method fully uses all information provided by the measurements of air temperature, wind, and humidity profiles, the surface energy budget, and the similarity profile formulae as well. Data collected at Feixi experiment station installed by the China Heavy Rain Experiment and Study (HeRES) Program are used to test the method. Results show that the proposed technique can overcome the well-known unstablility problem that occurs when the Bowen method becomes singular; in comparison with the profile method, it reduces both the sensitivities of latent heat fluxes to observational errors in humidity and those of sensible heat fluxes to observational errors in temperature, while the estimated heat fluxes approximately satisfy the surface energy budget. Therefore, the variational technique is more reliable and stable than the two conventional methods in estimating surface sensible and latent heat fluxes.
基金supported by National Natural Science Foundation of China (Grant No. 10871072)Natural Science Foundation of Shanxi Province of China (Grant No. 2007011014)PhD Program Scholarship Fund of ECNU 2009
文摘Statistical inference on parametric part for the partially linear single-index model (PLSIM) is considered in this paper. A profile least-squares technique for estimating the parametric part is proposed and the asymptotic normality of the profile least-squares estimator is given. Based on the estimator, a generalized likelihood ratio (GLR) test is proposed to test whether parameters on linear part for the model is under a contain linear restricted condition. Under the null model, the proposed GLR statistic follows asymptotically the χ2-distribution with the scale constant and degree of freedom independent of the nuisance parameters, known as Wilks phenomenon. Both simulated and real data examples are used to illustrate our proposed methods.
文摘The ^(nat)Mo(γ,xnp)^(95m,g)Nb photonuclear reaction was studied using the electron beam from the NSC KIPT linear accelerator LUE-40.The experiment was performed using the activation and off-line γ-ray spectrometric technique.The experimental isomeric yield ratio(IR) was determined for the reaction products ^(95m,g)Nb at the bremsstrahlung end-point energy E_(γmax) range of 38-93 MeV.The obtained values of IR are in satisfactory agreement with the results of other studies and extend the range of previously known data.The theoretical values of the yields Y_(m,g)(E_(γmax)) and the IR for the isomeric pair ^(95m,g)Nb from the ^(nat)Mo(γ,xnp) reaction were calculated using the partial cross-sections σ(E) from the TALYS1.95 code for six different level density models.For the investigated range of E_(γmax),the theoretical dependence of IR on energy was confirmed-the IR smoothly increases with increasing energy.The comparison showed a noticeable difference(more than 3.85 times) in the experimental IR relative to all theoretical estimates.
文摘The photoneutron reaction^(18)Ta(y,3m)(178m,g)Ta was investigated with the beam from the NSC KIPT electron linear accelerator LUE-40.The measurements were performed using the residual y-activity method.The bremsstrahlung flux-averaged cross sections((E_(γmax))>.(r(E_(γmax))>m.<r(E_(γmax))g and the isomerie ratio of the re-action products d(E_(γmax))were measured.The theoretical values of the averaged cross-sections and isomeric ratio were calculated using the partial cross-sections from the TALYS1.95 code for different level density models LD 1-6..The obtained experimental d(E_(γmax))agree with the data in the lterature,but differ from the theoretical values in ab-solute magnitude and the behavior of the energy dependence.A comparison of the determined averaged cross-sec-tions with the calculated cross sections showed the best agreement for the case of the LD 5 model.
文摘Zinc-aluminum alloys have been used as bearing materials in the past. In recent years, binary Al-Zn alloys and Al-Zn-Cu alloys are being used as an alternative to the Zn-Al alloys for bearing applications. In this study, both binary Al-25 Zn and Al-3 Cu were prepared using stir casting process. Homogenization of the as-cast alloys was performed at 350oC for 8 h and then, the alloys were furnace-cooled to 50oC. The homogenization led to the removal of the dendritic structure of the as-cast alloys. After homogenization, wear parameters optimization was carried out using Taguchi technique. For this purpose, L9 orthogonal array was selected, and the control parameters selected are load, velocity, and sliding distance. The optimum parametric condition was obtained using signal-to-noise(S/N) ratio analysis, and specific wear rate(SWR) is the selected response. The "smaller-the-better" is the goal of the experiment for S/N ratio analysis. After the optimization, confirmation tests were carried out using analysis of variance(ANOVA) from the developed regression equation. Finally, wear mechanism studies were conducted using scanning electron microscopy(SEM) and energy-dispersive X-ray spectroscopy(EDX) images.
