Poly(N-isopropylacrylamide)(PNIPAAm)-based thermo-responsive surfaces can switch their wettability(from wettable to non-wettable) and adhesion(from sticky to non-sticky) according to external temperature changes. Thes...Poly(N-isopropylacrylamide)(PNIPAAm)-based thermo-responsive surfaces can switch their wettability(from wettable to non-wettable) and adhesion(from sticky to non-sticky) according to external temperature changes. These smart surfaces with switchable interfacial properties are playing increasingly important roles in a diverse range of biomedical applications; these controlling cell-adhesion behavior has shown great potential for tissue engineering and disease diagnostics. Herein we reviewed the recent progress of research on PNIPAAm-based thermo-responsive surfaces that can dynamically control cell adhesion behavior. The underlying response mechanisms and influencing factors for PNIPAAm-based surfaces to control cell adhesion are described first. Then, PNIPAAm-modified two-dimensional flat surfaces for cell-sheet engineering and PNIPAAm-modified three-dimensional nanostructured surfaces for diagnostics are summarized. We also provide a future perspective for the development of stimuli-responsive surfaces.展开更多
The monodispersed polymeric particles with an unusual structure were prepared by the dispersion copolymerization of acrylonitrile/styrene（AN/St） in mixed solvents of ethanol/water by using the poly（N-isopropylacryl...The monodispersed polymeric particles with an unusual structure were prepared by the dispersion copolymerization of acrylonitrile/styrene（AN/St） in mixed solvents of ethanol/water by using the poly（N-isopropylacrylamide） （PNIPAAm） macromonomer as a reaction stabilizer. It was found that the AN monomer plays a key role in the formation of the particles with special morphology analyzed via scanning electron microscopy （SEM）. The reaction parameters have remarkable influences on the particle size and morphology. The particles possess a thermosensitive property according to the result of laser light scattering（LLS）.展开更多
Surface-grafted block copolymer brushes with continuous composition gradients containing poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) and poly(N-isopropylacrylamide) (PNIPAAm) chains were fabricated by inte...Surface-grafted block copolymer brushes with continuous composition gradients containing poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) and poly(N-isopropylacrylamide) (PNIPAAm) chains were fabricated by integration of the surface-initiated atom transfer radical polymerization (SI-ATRP) and continuous injection method. Three types of copolymer gradients were prepared: (1) a uniform P(PEGMA) layer was block copolymerized with a gradient PNIPAAm layer (PP1); (2) a gradient P(PEGMA) layer was block copolymerized with a uniform PNIPAAm layer (PP2); and (3) a gradient P(PEGMA) layer was inversely block copolymerized with a gradient PNIPAAm layer (PP3). The as-prepared gradients were characterized by ellipsometry, water contact angle and atomic force microscopy (AFM) to determine their alterations in thickness, surface wettability and morphology, confirming the gradient structures. In vitro culture of HepG2 cells was implemented on the gradient surfaces, revealing that the cells could adhere at 37 ℃ and be detached at 20 ℃. Introduction of the PEG chains as an underlying layer on the PNIPAAm grafting surfaces resulted in faster cell detachment compared with the PNIPAAm grafting surface.展开更多
Thermoresponsive poly（N-isopropylacrylamide） （PNIPAAm） brushes were densely grafted onto silica surface via surface-initiated atom transfer radical polymeriza- tion （SI-ATRP）. The grafting reaction started from ...Thermoresponsive poly（N-isopropylacrylamide） （PNIPAAm） brushes were densely grafted onto silica surface via surface-initiated atom transfer radical polymeriza- tion （SI-ATRP）. The grafting reaction started from the surfaces of 2-bromoisobutyrate- functionalized silica particles in 2-propanol aqueous solution at ambient temperature using CuCIICuCI21N, N,N＇,N＇,N”.pentamethyldiethylenetriamine （PMDETA） as the catalytic system. Based on thermogravimetric analysis （TGA） results, the grafting amount and grafting density of PNIPAM chains on the surface of silica were calculated to be 1.29 mg/ m^2 and 0.0215 chains/nm^2, respectively. The gel permeation chromatography （GPC） result showed the relatively narrow molecular weight distribution （MwlMn= 1.21） of the grafted PNIPAAm. The modified silica particles were applied as high-performance liquid chromatography （HPLC） packing materials to successfully separate three aromatic compounds using water as mobile phase by changing column temperature. Temperature- dependent hydrophilic/hydrophobic property alteration of PNIPAAm brushes grafted on silica particles was determined with chromatographic interaction between stationary phase and analytes. Retention time was prolonged and resolution was improved with increasing temperature. Baseline separation with high resolution at relatively low temperatures was observed, demonstrating dense PNIPAAm brushes were grafted on silica surfaces.展开更多
The effect of cross-linker (methylene-bis-acrylamide) (MBA) on the volume phase transition, mechanical properties and de-swelling of Poly(N-isopropyl acrylamide-co-methylene-bis-acrylamide) hydrogel (PNIPAAm/MBA hydro...The effect of cross-linker (methylene-bis-acrylamide) (MBA) on the volume phase transition, mechanical properties and de-swelling of Poly(N-isopropyl acrylamide-co-methylene-bis-acrylamide) hydrogel (PNIPAAm/MBA hydrogel) was investigated. A new method, namely isothermal thermo-gravimetry was developed for monitoring de-swelling of PNIPAAm/MBA hydrogel. Monomer/ Cross-linker ratio of the initial monomer composition R = moleNIPAAm/moleMBA was introduced. It has been proven earlier that initial monomer composition is close to the copolymer composition;hence R values may be used to express cross-link density. Hydrogels from R10 to R150 were investigated. The results of DSC analysis revealed that the less the cross-linker ratio in the gel (from R10 to R150) the more sharp the temperature range of volume phase transition and the higher its enthalpy. Cross-link density, namely increasing cross-linker content in the copolymer (R from 150 to 10) does not significantly affect the temperature range of volume phase transition. It sets on at 33°C - 34°C, and ends between 35?C and 38?C. Cross-link density has significant effect on compression modulus. By decreasing the ratio of cross-linker (by increasing R from 10 to 150), the compression modulus increases, goes through a maximum, and then decreases. The highest compression modulus was measured for PNIPAAm/MBA hydrogel R20. Hydrogels with cross-linker content between R100 and 30 are strong enough and have their thermoresponsivity. Isothermal thermograms of de-swelling are of similar character for all the gels with different cross-linker content. During the initial stage of de-swelling for gels with higher cross-linker content (R10 - R15) the solute release is quicker than for gels R20 - 150 and the thermograms are drawn out. In the initial stage of de-swelling, i.e. during the first 40 minutes the rate of solute release is the highest for gels R70 - 150. The cross-linker content effects solute release, especially for gels with high cross-linker content. It is notewor展开更多
基金supported by the National Basic Research Program of China(2012CB933800,2011CB935700,2012CB933200)the National Natural Science Foundation of China(21175140,20974113,21121001)the Key Research Program of the Chinese Academy of Sciences(KJZD-EW-M01)
文摘Poly(N-isopropylacrylamide)(PNIPAAm)-based thermo-responsive surfaces can switch their wettability(from wettable to non-wettable) and adhesion(from sticky to non-sticky) according to external temperature changes. These smart surfaces with switchable interfacial properties are playing increasingly important roles in a diverse range of biomedical applications; these controlling cell-adhesion behavior has shown great potential for tissue engineering and disease diagnostics. Herein we reviewed the recent progress of research on PNIPAAm-based thermo-responsive surfaces that can dynamically control cell adhesion behavior. The underlying response mechanisms and influencing factors for PNIPAAm-based surfaces to control cell adhesion are described first. Then, PNIPAAm-modified two-dimensional flat surfaces for cell-sheet engineering and PNIPAAm-modified three-dimensional nanostructured surfaces for diagnostics are summarized. We also provide a future perspective for the development of stimuli-responsive surfaces.
文摘The monodispersed polymeric particles with an unusual structure were prepared by the dispersion copolymerization of acrylonitrile/styrene（AN/St） in mixed solvents of ethanol/water by using the poly（N-isopropylacrylamide） （PNIPAAm） macromonomer as a reaction stabilizer. It was found that the AN monomer plays a key role in the formation of the particles with special morphology analyzed via scanning electron microscopy （SEM）. The reaction parameters have remarkable influences on the particle size and morphology. The particles possess a thermosensitive property according to the result of laser light scattering（LLS）.
基金supported by the National Natural Science Foundation of China (20934003,20774084)the National Basic Research Program of China (973Program,2005CB623902)
文摘Surface-grafted block copolymer brushes with continuous composition gradients containing poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) and poly(N-isopropylacrylamide) (PNIPAAm) chains were fabricated by integration of the surface-initiated atom transfer radical polymerization (SI-ATRP) and continuous injection method. Three types of copolymer gradients were prepared: (1) a uniform P(PEGMA) layer was block copolymerized with a gradient PNIPAAm layer (PP1); (2) a gradient P(PEGMA) layer was block copolymerized with a uniform PNIPAAm layer (PP2); and (3) a gradient P(PEGMA) layer was inversely block copolymerized with a gradient PNIPAAm layer (PP3). The as-prepared gradients were characterized by ellipsometry, water contact angle and atomic force microscopy (AFM) to determine their alterations in thickness, surface wettability and morphology, confirming the gradient structures. In vitro culture of HepG2 cells was implemented on the gradient surfaces, revealing that the cells could adhere at 37 ℃ and be detached at 20 ℃. Introduction of the PEG chains as an underlying layer on the PNIPAAm grafting surfaces resulted in faster cell detachment compared with the PNIPAAm grafting surface.
文摘Thermoresponsive poly（N-isopropylacrylamide） （PNIPAAm） brushes were densely grafted onto silica surface via surface-initiated atom transfer radical polymeriza- tion （SI-ATRP）. The grafting reaction started from the surfaces of 2-bromoisobutyrate- functionalized silica particles in 2-propanol aqueous solution at ambient temperature using CuCIICuCI21N, N,N＇,N＇,N”.pentamethyldiethylenetriamine （PMDETA） as the catalytic system. Based on thermogravimetric analysis （TGA） results, the grafting amount and grafting density of PNIPAM chains on the surface of silica were calculated to be 1.29 mg/ m^2 and 0.0215 chains/nm^2, respectively. The gel permeation chromatography （GPC） result showed the relatively narrow molecular weight distribution （MwlMn= 1.21） of the grafted PNIPAAm. The modified silica particles were applied as high-performance liquid chromatography （HPLC） packing materials to successfully separate three aromatic compounds using water as mobile phase by changing column temperature. Temperature- dependent hydrophilic/hydrophobic property alteration of PNIPAAm brushes grafted on silica particles was determined with chromatographic interaction between stationary phase and analytes. Retention time was prolonged and resolution was improved with increasing temperature. Baseline separation with high resolution at relatively low temperatures was observed, demonstrating dense PNIPAAm brushes were grafted on silica surfaces.
文摘The effect of cross-linker (methylene-bis-acrylamide) (MBA) on the volume phase transition, mechanical properties and de-swelling of Poly(N-isopropyl acrylamide-co-methylene-bis-acrylamide) hydrogel (PNIPAAm/MBA hydrogel) was investigated. A new method, namely isothermal thermo-gravimetry was developed for monitoring de-swelling of PNIPAAm/MBA hydrogel. Monomer/ Cross-linker ratio of the initial monomer composition R = moleNIPAAm/moleMBA was introduced. It has been proven earlier that initial monomer composition is close to the copolymer composition;hence R values may be used to express cross-link density. Hydrogels from R10 to R150 were investigated. The results of DSC analysis revealed that the less the cross-linker ratio in the gel (from R10 to R150) the more sharp the temperature range of volume phase transition and the higher its enthalpy. Cross-link density, namely increasing cross-linker content in the copolymer (R from 150 to 10) does not significantly affect the temperature range of volume phase transition. It sets on at 33°C - 34°C, and ends between 35?C and 38?C. Cross-link density has significant effect on compression modulus. By decreasing the ratio of cross-linker (by increasing R from 10 to 150), the compression modulus increases, goes through a maximum, and then decreases. The highest compression modulus was measured for PNIPAAm/MBA hydrogel R20. Hydrogels with cross-linker content between R100 and 30 are strong enough and have their thermoresponsivity. Isothermal thermograms of de-swelling are of similar character for all the gels with different cross-linker content. During the initial stage of de-swelling for gels with higher cross-linker content (R10 - R15) the solute release is quicker than for gels R20 - 150 and the thermograms are drawn out. In the initial stage of de-swelling, i.e. during the first 40 minutes the rate of solute release is the highest for gels R70 - 150. The cross-linker content effects solute release, especially for gels with high cross-linker content. It is notewor
