The slurry settling characteristics are the most important to design a thickener in process industries. In this work, the iron ore slurry from the screw classifier overflow was used for the settling study. It was obse...The slurry settling characteristics are the most important to design a thickener in process industries. In this work, the iron ore slurry from the screw classifier overflow was used for the settling study. It was observed that the original slurry exhibited a low settling velocity and a turbid supernatant during the settling process. Commercial flocculating agents with anionic, cationic, and nonionic characters were used to improve the settling behavior of suspensions, which were added into the slurry at different ranges of slurry pH values, respectively. The settling results show that the use of flocculants increase the settling rate by several times. Compared with the cationic and non-ionic flocculants, the anionic flocculant is more effective in enhancing the slurry settling rate. The small dose of the anionic flocculant is found to be more effective, but the other flocculants are less effective even at higher dosages. The simulation of an industrial thickener was carried out based on the laboratory settling data, and the appropriate design and selection parameters of the industrial thickener were estimated.展开更多
Froth flotation is the most effective industrial method used to separate fine-grained minerals. The main problem of complex ore flotation is the negative effect of interactions among minerals in slurry, leading to var...Froth flotation is the most effective industrial method used to separate fine-grained minerals. The main problem of complex ore flotation is the negative effect of interactions among minerals in slurry, leading to variation in surface properties during separation. In this review,studies on the interactive effect among minerals on the flotation of iron ores, magnesite ores, and scheelite ores are summarized, and the main problems and mechanisms that diminish the separation efficiency of minerals are revealed in detail. Recent research progress on the flotation of these ores has confirmed that mineral aggregation, coating, and dissolution, as well as other factors caused by interacting behavior, explain the depressing effects of fine particles on mineral separation. Solvable methods for these effects are further discussed. Novel flotation processes and more selective reagents are critical for further investigations on various approaches to improve the beneficiation efficiency of these ores.This review aims to provide a good reference for conducting studies related to complex ore flotation.展开更多
A logic fault tree of mine spontaneous combustion of sulphide ores was built by the fault tree analysis (FTA) based on a lot of mechanism investigation of sulphide ore spontaneous combustion in more than ten mines an...A logic fault tree of mine spontaneous combustion of sulphide ores was built by the fault tree analysis (FTA) based on a lot of mechanism investigation of sulphide ore spontaneous combustion in more than ten mines and review of a great amount of relevant展开更多
The effect of hydrated radius, cation valence, pH and solution concentration on the zeta potential of clay minerals was investigated, and the relation between zeta potential of clay minerals and swelling was discussed...The effect of hydrated radius, cation valence, pH and solution concentration on the zeta potential of clay minerals was investigated, and the relation between zeta potential of clay minerals and swelling was discussed in different leaching agents as well. The results show that the zeta potential of clay minerals decreases with the hydrated ionic radius increasing. It could be seen that the zeta potential of the clay minerals in AICl3 solution is positive,whereas that in NH4C1, KCl and MgCl2 solution is negative. And the zeta potential of clay minerals increases with the cation valence increasing. Moreover, the zeta potential of clay minerals decreases with the solution pH increasing,whereas that increases with the solution concentration increasing in different ammonium solutions. In addition,the swelling of clay minerals decreases while the zeta potential of clay minerals increasing in different ammonium solutions. The ability of compound ammonium to inhibit the swelling of clay minerals is lower than that of single ammonium solution.展开更多
An ore-blending optimization model for the sintering process is an intelligent system that includes iron ore characteristics, expert knowledge and material balance. In the present work, 14 indices are proposed to repr...An ore-blending optimization model for the sintering process is an intelligent system that includes iron ore characteristics, expert knowledge and material balance. In the present work, 14 indices are proposed to represent chemical composition, granulating properties and high temperature properties of iron ores. After the relationships between iron ore characteristics and sintering performance are established, the ＂two-step＂ method and the simplex method are introduced to build the model by distinguishing the calculation of optimized blending proportion of iron ores from that of other sintering materials in order to improve calculation efficiency. The ore-blending optimization model, programmed by Access and Visual Basic, is applied to practical production in steel mills and the results prove that the present model can take advantage of the available iron ore resource with stable sinter yield and quality performance but at a lower cost.展开更多
Flotation of indium-beard marmatite from Dulong multi-metallic ore in Yunnan Province of China was studied to improve the grades and recoveries of zinc and indium of the zinc concentrate in Dulong concentration plant....Flotation of indium-beard marmatite from Dulong multi-metallic ore in Yunnan Province of China was studied to improve the grades and recoveries of zinc and indium of the zinc concentrate in Dulong concentration plant. The experimental results indicated that copper sulfate mixed with a chemical reagent X- 1 as the activator in the marmatite flotation produced a much better beneficiation than copper sulfate alone, increasing the zinc and indium recoveries of 10% and 6%, respectively, while the concentrate grades remained unchanged. Also, the new activator acted well around pH 10, allowing large savings on lime consumption in the marmatite flotation. In addition, it has been found that a sufficient activated time of activator with ore slurry in the flotation is needed to achieve good beneficiation of the marmatite ore.展开更多
This paper deals with gold extraction from a refractory concentrate by chlorine leaching.The process considers a pre-treatment of refractory materials by low temperature oxidation carried out with low oxygen concentra...This paper deals with gold extraction from a refractory concentrate by chlorine leaching.The process considers a pre-treatment of refractory materials by low temperature oxidation carried out with low oxygen concentration.The oxidized material is treated by leaching with brine.After gold adsorption/reduction onto activated carbon,iron and base metals can be precipitated by NaOH.Roasting tests show the necessity to carry out a thermal pre-treatment at least at 550°C to obtain a reduction of sulfur and mercury in the material(50%and 90%,respectively).Highest gold extraction yield(around 93%)is obtained in the leaching test performed with material sample treated at 650°C.This result confrms the necessity to optimize the thermal pre-treatment to improve Au recovery and to reduce chlorine consumption.A comparison with conventional cyanidation confrms that chlorination could be an useful alternative:in fact,gold extraction yield is quite low:57%in non-pre-treated material and 25%in pre-treatment material.展开更多
The pH-dependent leaching of antimony（Sb） and arsenic（As） from three typical Sb-bearing ores（Banxi, Muli and Tongkeng Antimony Mine） in China was assessed using a pH-static leaching experiment. The pH changes of...The pH-dependent leaching of antimony（Sb） and arsenic（As） from three typical Sb-bearing ores（Banxi, Muli and Tongkeng Antimony Mine） in China was assessed using a pH-static leaching experiment. The pH changes of the leached solutions and pH-dependent leaching of Sb and As occurred in different ways. For the Banxi and Muli Sb ores, alkaline conditions were more favorable for the release of Sb compared to neutral and acidic conditions, but the reverse was true for the pH-dependent release of As. For the Tongkeng Sb ore, unlike the previous two Sb-bearing ores, acidic conditions were more favorable for Sb release than neutral and alkaline conditions.The ores with lower Sb and As contents released higher percentages of their Sb and As after 16 day leaching, suggesting that they are the largest potential sources of pollution. This work may provide key information on the geochemistry of Sb and As in the weathering zone.展开更多
Ion adsorption type rare earth ores(IATREOs)are a valuable strategic mineral resource in China,which feature a complete composition of fifteen rare earth elements and are rich in medium and heavy rare earth(RE)element...Ion adsorption type rare earth ores(IATREOs)are a valuable strategic mineral resource in China,which feature a complete composition of fifteen rare earth elements and are rich in medium and heavy rare earth(RE)elements.In the leaching process for recovering rare earth elements from IATREOs,many impurities will be leached together with rare earth elements and enter the leaching liquor.An impurity removal-precipitation enrichment technique is currently applied to selectively recovery rare earth elements from the leaching liquor with the high content of impurities and low concentration of rare earth elements by using ammonium bicarbonate in the industry.However,a high loss of rare earth elements and severe ammonia nitrogen pollution are caused by this process.Therefore,more beneficial impurities removal technologies,mainly for aluminum,and green enrichment technologies with lower pollution are now urgently needed.For this purpose,this paper analyzed two aspects of research progress in recent decades:the green separation of rare earth elements and aluminum from leaching liquor and the green and efficient enrichment of rare earth elements.Finally,an approach for the high-efficiency and green enrichment of rare earth elements from leaching liquor of the IATREOs is proposed in several aspects,including impurity inhibition leaching,neutralization and impurity removal,alkaline calcium and magnesium salt precipitation enrichment,and centrifugal extraction enrichment.展开更多
This present study focused on investigating the content and relative enrichment multiple of rare earth elements（REEs） in different terrain of weathered ore body, and the value of light rare earth elements/middle and...This present study focused on investigating the content and relative enrichment multiple of rare earth elements（REEs） in different terrain of weathered ore body, and the value of light rare earth elements/middle and heavy rare earth elements（LREEs/HREEs）, in order to understand the mobilization and redistribution of HREEs, Furthermore, the abrasion pH was investigated as well, The results show that the average contents of HREEs in the knap, ridge and col are 37.26, 61.71, and 271.3 μg/g, respectively. The value of LREEs/HREEs is decreased from 16.78 to 7.914 between knap and col and the relative enrichment multiple of HREEs is as follows： CCol-HREEs 〉 CRidge-HREEs 〉 0. It is indicated the HREEs is concentrated in the col and the enrichment degree of HREEs is stronger than the ridge and the knap. Rare earth elements fractionation is exhibited in the different terrain of weathered ore body. Based on this study, the finding that HREEs concentrate in the lower terrain of weathered crust elution-deposited rare earth ores, such as in the col, would become a marker or indicator to search for middle and heavy rare earth enriched zone.展开更多
In order to obtain good sintering performance, it is important to understand sintering properties of iron ores. Sintering properties including chemical composition, granulation and high-temperature behaviors of ores f...In order to obtain good sintering performance, it is important to understand sintering properties of iron ores. Sintering properties including chemical composition, granulation and high-temperature behaviors of ores from China, Brazil and Australia. Furthermore, several indices were defined to evaluate sintering properties of iron ores. The results show that： for chemical composition, Brazilian ores present high TFe, low SiOz, and low Alz03 con- tent. For granulation, particle diameter ratio of Brazilian ores are high; particle intermediate fraction of Chinese con- centrates are low; and average particle size and clay type index of Australian ores are high. For high-temperature properties, ores from China, Brazil and Australia present different characteristics. Ores from different origins should be mixed together to obtain good high-temperature properties. According to the analysis of each ore＇s sintering prop- erties, an ore blending scheme （Chinese concentrates 20 ^-1- Brazilian ores 400//oo -k Australian ores 40 ~） was sugges- ted. Moreover, sinter pot test using blending mix was performed, and the results indicated that the ore blending scheme led to good sintering performance and sinter quality.展开更多
文摘The slurry settling characteristics are the most important to design a thickener in process industries. In this work, the iron ore slurry from the screw classifier overflow was used for the settling study. It was observed that the original slurry exhibited a low settling velocity and a turbid supernatant during the settling process. Commercial flocculating agents with anionic, cationic, and nonionic characters were used to improve the settling behavior of suspensions, which were added into the slurry at different ranges of slurry pH values, respectively. The settling results show that the use of flocculants increase the settling rate by several times. Compared with the cationic and non-ionic flocculants, the anionic flocculant is more effective in enhancing the slurry settling rate. The small dose of the anionic flocculant is found to be more effective, but the other flocculants are less effective even at higher dosages. The simulation of an industrial thickener was carried out based on the laboratory settling data, and the appropriate design and selection parameters of the industrial thickener were estimated.
基金This work was financially supported by the National Natural Science Foundation of China(No.51874072).
文摘Froth flotation is the most effective industrial method used to separate fine-grained minerals. The main problem of complex ore flotation is the negative effect of interactions among minerals in slurry, leading to variation in surface properties during separation. In this review,studies on the interactive effect among minerals on the flotation of iron ores, magnesite ores, and scheelite ores are summarized, and the main problems and mechanisms that diminish the separation efficiency of minerals are revealed in detail. Recent research progress on the flotation of these ores has confirmed that mineral aggregation, coating, and dissolution, as well as other factors caused by interacting behavior, explain the depressing effects of fine particles on mineral separation. Solvable methods for these effects are further discussed. Novel flotation processes and more selective reagents are critical for further investigations on various approaches to improve the beneficiation efficiency of these ores.This review aims to provide a good reference for conducting studies related to complex ore flotation.
文摘A logic fault tree of mine spontaneous combustion of sulphide ores was built by the fault tree analysis (FTA) based on a lot of mechanism investigation of sulphide ore spontaneous combustion in more than ten mines and review of a great amount of relevant
基金financially supported by the National Natural Science Foundation of China (Nos. 41472071 and 51734001)
文摘The effect of hydrated radius, cation valence, pH and solution concentration on the zeta potential of clay minerals was investigated, and the relation between zeta potential of clay minerals and swelling was discussed in different leaching agents as well. The results show that the zeta potential of clay minerals decreases with the hydrated ionic radius increasing. It could be seen that the zeta potential of the clay minerals in AICl3 solution is positive,whereas that in NH4C1, KCl and MgCl2 solution is negative. And the zeta potential of clay minerals increases with the cation valence increasing. Moreover, the zeta potential of clay minerals decreases with the solution pH increasing,whereas that increases with the solution concentration increasing in different ammonium solutions. In addition,the swelling of clay minerals decreases while the zeta potential of clay minerals increasing in different ammonium solutions. The ability of compound ammonium to inhibit the swelling of clay minerals is lower than that of single ammonium solution.
文摘An ore-blending optimization model for the sintering process is an intelligent system that includes iron ore characteristics, expert knowledge and material balance. In the present work, 14 indices are proposed to represent chemical composition, granulating properties and high temperature properties of iron ores. After the relationships between iron ore characteristics and sintering performance are established, the ＂two-step＂ method and the simplex method are introduced to build the model by distinguishing the calculation of optimized blending proportion of iron ores from that of other sintering materials in order to improve calculation efficiency. The ore-blending optimization model, programmed by Access and Visual Basic, is applied to practical production in steel mills and the results prove that the present model can take advantage of the available iron ore resource with stable sinter yield and quality performance but at a lower cost.
基金This study was financially supported by the National Natural Science Foundation of China (No.50464003).
文摘Flotation of indium-beard marmatite from Dulong multi-metallic ore in Yunnan Province of China was studied to improve the grades and recoveries of zinc and indium of the zinc concentrate in Dulong concentration plant. The experimental results indicated that copper sulfate mixed with a chemical reagent X- 1 as the activator in the marmatite flotation produced a much better beneficiation than copper sulfate alone, increasing the zinc and indium recoveries of 10% and 6%, respectively, while the concentrate grades remained unchanged. Also, the new activator acted well around pH 10, allowing large savings on lime consumption in the marmatite flotation. In addition, it has been found that a sufficient activated time of activator with ore slurry in the flotation is needed to achieve good beneficiation of the marmatite ore.
文摘This paper deals with gold extraction from a refractory concentrate by chlorine leaching.The process considers a pre-treatment of refractory materials by low temperature oxidation carried out with low oxygen concentration.The oxidized material is treated by leaching with brine.After gold adsorption/reduction onto activated carbon,iron and base metals can be precipitated by NaOH.Roasting tests show the necessity to carry out a thermal pre-treatment at least at 550°C to obtain a reduction of sulfur and mercury in the material(50%and 90%,respectively).Highest gold extraction yield(around 93%)is obtained in the leaching test performed with material sample treated at 650°C.This result confrms the necessity to optimize the thermal pre-treatment to improve Au recovery and to reduce chlorine consumption.A comparison with conventional cyanidation confrms that chlorination could be an useful alternative:in fact,gold extraction yield is quite low:57%in non-pre-treated material and 25%in pre-treatment material.
基金supported by the National Natural Science Foundation of China (No. 41273105)the Nonprofit Environment Protection Specific Project (No. 201209013)
文摘The pH-dependent leaching of antimony（Sb） and arsenic（As） from three typical Sb-bearing ores（Banxi, Muli and Tongkeng Antimony Mine） in China was assessed using a pH-static leaching experiment. The pH changes of the leached solutions and pH-dependent leaching of Sb and As occurred in different ways. For the Banxi and Muli Sb ores, alkaline conditions were more favorable for the release of Sb compared to neutral and acidic conditions, but the reverse was true for the pH-dependent release of As. For the Tongkeng Sb ore, unlike the previous two Sb-bearing ores, acidic conditions were more favorable for Sb release than neutral and alkaline conditions.The ores with lower Sb and As contents released higher percentages of their Sb and As after 16 day leaching, suggesting that they are the largest potential sources of pollution. This work may provide key information on the geochemistry of Sb and As in the weathering zone.
基金Project supported by the National Key Research and Development Project of China(2020YFC1909002,2019YFC0605002)National Natural Science Foundation of China(51604128)+1 种基金The Youth Jinggang Scholars Program in Jiangxi Province(QNJG2019056)the Cultivation Project of the State Key Laboratory of Green Development and High-value Utilization of Ionic Rare Earth Resources in Jiangxi Province(20194AFD44003)。
文摘Ion adsorption type rare earth ores(IATREOs)are a valuable strategic mineral resource in China,which feature a complete composition of fifteen rare earth elements and are rich in medium and heavy rare earth(RE)elements.In the leaching process for recovering rare earth elements from IATREOs,many impurities will be leached together with rare earth elements and enter the leaching liquor.An impurity removal-precipitation enrichment technique is currently applied to selectively recovery rare earth elements from the leaching liquor with the high content of impurities and low concentration of rare earth elements by using ammonium bicarbonate in the industry.However,a high loss of rare earth elements and severe ammonia nitrogen pollution are caused by this process.Therefore,more beneficial impurities removal technologies,mainly for aluminum,and green enrichment technologies with lower pollution are now urgently needed.For this purpose,this paper analyzed two aspects of research progress in recent decades:the green separation of rare earth elements and aluminum from leaching liquor and the green and efficient enrichment of rare earth elements.Finally,an approach for the high-efficiency and green enrichment of rare earth elements from leaching liquor of the IATREOs is proposed in several aspects,including impurity inhibition leaching,neutralization and impurity removal,alkaline calcium and magnesium salt precipitation enrichment,and centrifugal extraction enrichment.
基金Project supported by National Natural Science Foundation of China(41472071,51734001)
文摘This present study focused on investigating the content and relative enrichment multiple of rare earth elements（REEs） in different terrain of weathered ore body, and the value of light rare earth elements/middle and heavy rare earth elements（LREEs/HREEs）, in order to understand the mobilization and redistribution of HREEs, Furthermore, the abrasion pH was investigated as well, The results show that the average contents of HREEs in the knap, ridge and col are 37.26, 61.71, and 271.3 μg/g, respectively. The value of LREEs/HREEs is decreased from 16.78 to 7.914 between knap and col and the relative enrichment multiple of HREEs is as follows： CCol-HREEs 〉 CRidge-HREEs 〉 0. It is indicated the HREEs is concentrated in the col and the enrichment degree of HREEs is stronger than the ridge and the knap. Rare earth elements fractionation is exhibited in the different terrain of weathered ore body. Based on this study, the finding that HREEs concentrate in the lower terrain of weathered crust elution-deposited rare earth ores, such as in the col, would become a marker or indicator to search for middle and heavy rare earth enriched zone.
文摘In order to obtain good sintering performance, it is important to understand sintering properties of iron ores. Sintering properties including chemical composition, granulation and high-temperature behaviors of ores from China, Brazil and Australia. Furthermore, several indices were defined to evaluate sintering properties of iron ores. The results show that： for chemical composition, Brazilian ores present high TFe, low SiOz, and low Alz03 con- tent. For granulation, particle diameter ratio of Brazilian ores are high; particle intermediate fraction of Chinese con- centrates are low; and average particle size and clay type index of Australian ores are high. For high-temperature properties, ores from China, Brazil and Australia present different characteristics. Ores from different origins should be mixed together to obtain good high-temperature properties. According to the analysis of each ore＇s sintering prop- erties, an ore blending scheme （Chinese concentrates 20 ^-1- Brazilian ores 400//oo -k Australian ores 40 ~） was sugges- ted. Moreover, sinter pot test using blending mix was performed, and the results indicated that the ore blending scheme led to good sintering performance and sinter quality.
