期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
A new three-dimensional Hoek-Brown strength criterion 被引量:10
1
作者 Hua Jiang Yong-Li Xie 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2012年第2期393-406,共14页
The Hoek-Brown (HB) strength criterion has been widely applied to the estimation of strength of intact rock and rock mass, while evolving ever since. However, negligence of the effect of the intermediate principal s... The Hoek-Brown (HB) strength criterion has been widely applied to the estimation of strength of intact rock and rock mass, while evolving ever since. However, negligence of the effect of the intermediate principal stress still remains in the criterion's latest version. At the same time, several three-dimensional (3D) HB strength, which can takes into account the influence of the intermediate principal stress, have already been proposed, among which the 3D HB criterion proposed by Zhang and Zhu seems to be the most reasonable one. However, the Zhang 3D HB criterion may have problems with some stress path close to triaxial extension state because of the non-convexity characteristic of its failure surface. In this paper, a new 3D HB strength criterion is presented based on a generalized form of the HB criterion, which also considers the effect of the intermediate principal stress and inherits all the merits of the original version of the HB criterion. In addition, this new criterion can remedy to some extent the shortcomings observed in the Zhang 3D HB criterion. Polyaxial tests for five different rocks from pub- lished literatures are used for evaluating this new criterion and comparing it with the Zhang 3D HB criterion. The re- sults show that this new criterion may over-predict or under- predict the polyaxial strength of rocks but the errors are rela- tively small, and similar results are also found for the Zhang 3D HB criterion, which one is better depends on the type of the rock under estimation. 展开更多
关键词 Hoek-Brown criterion Rock strength Merid-ian plane octahedral plane
下载PDF
粉末高温合金FGH4096的疲劳小裂纹扩展行为
2
作者 杨秦政 杨晓光 +1 位作者 黄渭清 石多奇 《金属学报》 SCIE EI CAS CSCD 北大核心 2022年第5期683-694,共12页
以粉末高温合金FGH4096为研究对象,开展了2个不同最大应力条件下的疲劳小裂纹扩展实验。利用SEM结合EBSD观察了小裂纹扩展路径,表征了扩展路径上晶粒的取向,重点从小裂纹的三维属性和扩展物理基础出发,研究了小裂纹的扩展和停滞行为。... 以粉末高温合金FGH4096为研究对象,开展了2个不同最大应力条件下的疲劳小裂纹扩展实验。利用SEM结合EBSD观察了小裂纹扩展路径,表征了扩展路径上晶粒的取向,重点从小裂纹的三维属性和扩展物理基础出发,研究了小裂纹的扩展和停滞行为。结果表明:小裂纹自萌生到总长度超过1.0 mm后始终保持沿八面体滑移面扩展的行为;晶界和孪晶界是阻碍小裂纹扩展、导致小裂纹扩展停滞的微观组织,这些晶界/孪晶界的M因子都较邻近晶界的M因子低,表明M因子可用作表征晶界/孪晶界阻碍小裂纹扩展的能力。根据晶界性质和载荷的不同,小裂纹在晶界/孪晶界处发生扩展停滞后可以有3种行为:一是在经历一定循环数后,裂纹穿越晶界继续扩展;二是在裂纹停滞期间,裂纹转到所在晶粒内的其他滑移面或沿扩展路径上其他晶粒内的滑移面继续扩展;三是二次裂纹在停滞的主裂纹尖端附近1~2个晶粒范围萌生,并与主裂纹连接后继续扩展成为新的主裂纹,该裂纹行为仅出现在最大应力接近屈服强度范围下限的试样中。 展开更多
关键词 镍基粉末高温合金 疲劳小裂纹 八面体滑移面
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部