The complex 3D flow in a steam turbine exhaust hood model with different inlet swirl and inlet total pressure radial distributions has been simulated by employing CFX-5 and analyzed in this paper. It＇s found that the...The complex 3D flow in a steam turbine exhaust hood model with different inlet swirl and inlet total pressure radial distributions has been simulated by employing CFX-5 and analyzed in this paper. It＇s found that the inlet tangential flow angle at hub has a negative effect on the exhaust hood performance, while a negative gradient of inlet total pressure radial distribution has a positive impact on the hood performances. It＇s also numerically con- firmed that a proper distribution of total pressure at hood inlet can successfully eliminate the negative effects caused by the inappropriate inlet swirl distribution and improve the hood aerodynamic performance.展开更多
The flow field distribution in centrifugal compressor is significantly affected by the non-axisymmetric geometry structure of the volute.The experimental and numerical simulation methods were adopted in this work to s...The flow field distribution in centrifugal compressor is significantly affected by the non-axisymmetric geometry structure of the volute.The experimental and numerical simulation methods were adopted in this work to study the compressor flow field distribution with different flow conditions.The results show that the pressure distribution in volute is characterized by the circumferential non-uniform phenomenon and the pressure fluctuation on the high static pressure zone propagates reversely to upstream,which results in the non-axisymmetric flow inside the compressor.The non-uniform level of pressure distribution in large flow condition is higher than that in small flow condition,its effect on the upstream flow field is also stronger.Additionally,the non-uniform circumferential pressure distribution in volute brings the non-axisymmetric flow at impeller outlet.In different flow conditions,the circumferential variation of the absolute flow angle at impeller outlet is also different.Meanwhile,the non-axisymmetric flow characteristics in internal impeller can be also reflected by the distribution of the mass flow.The high static pressure region of the volute corresponds to the decrease of mass flow in upstream blade channel,while the low static pressure zone of the volute corresponds to the increase of the mass flow.In small flow condition,the mass flow difference in the blade channel is bigger than that in the large flow condition.展开更多
Non-Axisymmetric Endwall Profiling(NAEP) is commonly utilized in turbines to eliminate secondary flows.Nevertheless,most of the NAEP methods consider a single-blade row environment without incorporating the effect of ...Non-Axisymmetric Endwall Profiling(NAEP) is commonly utilized in turbines to eliminate secondary flows.Nevertheless,most of the NAEP methods consider a single-blade row environment without incorporating the effect of the stage environment.This paper aims to investigate the influence mechanism of the incoming vortex on the endwall secondary flow structures of NAEP in a highly loaded turbine cascade.To model the incoming vortex in a stage environment,this study considers a half-delta wing as the vortex generator at the upstream of the turbine cascade.The NAEP is then carried out for a highly loaded turbine cascade with an in-house numerical optimization design platform subject to no incoming vortex.Numerical simulation is also carried out under the influence of the incoming vortex for the turbine cascades with both planar and non-axisymmetric endwall.This paper furthers investigated the pitchwise effect of the incoming vortex on the near endwall secondary flow.The results indicate that the NAEP effectively improves the endwall secondary flow of the turbine cascade,where the total pressure loss coefficient and the secondary kinetic energy(SKE) are reduced by 7.3%,and 45.7%,respectively.It is further seen that with the incoming vortex,the NAEP achieves a considerable control effect on the endwall secondary flow of the turbine cascade.With incoming vortex,the NAEP can still achieve considerable control effect on the endwall secondary flow of the turbine cascade;the averaged reductions of loss coefficient and SKE are 7.8% and 14.2%,respectively.Under some pitchwise locations,incoming vortex can suppress the convection of cross-passage flow toward the suction corner greatly and reduce the loss coefficient of the baseline cascade.The incoming vortex at 4/7 pitch impinged right at the blade leading edge,leading to the generation of low-momentum fluid,which increased the size and the strength of the horseshoe vortex.Under all the pitchwise locations,NAEP can suppress the secondary vortices,e.g.,the passage vortex and the c展开更多
Axisymmetric liquid jets have been studied extensively for more than one century, while non-axisymmetric jets are also very common in engineering applications but attract less concern. Based on Eulerian fluid-fluid mo...Axisymmetric liquid jets have been studied extensively for more than one century, while non-axisymmetric jets are also very common in engineering applications but attract less concern. Based on Eulerian fluid-fluid model in Fluent software, this article analysizes the 3-D flow fields of pressure atomizers with V-shaped cut at orifice, which will result in a non-axisymmetric liquid jet. Flow rate analysis and jet structure analysis are carried out, the results show that the flow rate can be formulated by adding a correction coefficient to the formula of inviscid axisymmetric jets in atomization regime, when the Weber number is low enough to make the flow fall out of atomization regime, and the jet structure together with the flow rate formula will change. Analysis shows that the evolution of the spray and therefore the structure of the liquid jet are affected much by relative velocity and the local volume fraction of liquid phase.展开更多
基金the National Natural Science Foundation of China (grant No.50336050)
文摘The complex 3D flow in a steam turbine exhaust hood model with different inlet swirl and inlet total pressure radial distributions has been simulated by employing CFX-5 and analyzed in this paper. It＇s found that the inlet tangential flow angle at hub has a negative effect on the exhaust hood performance, while a negative gradient of inlet total pressure radial distribution has a positive impact on the hood performances. It＇s also numerically con- firmed that a proper distribution of total pressure at hood inlet can successfully eliminate the negative effects caused by the inappropriate inlet swirl distribution and improve the hood aerodynamic performance.
基金sponsored by the National Natural Science Foundation of China(No.51276017)
文摘The flow field distribution in centrifugal compressor is significantly affected by the non-axisymmetric geometry structure of the volute.The experimental and numerical simulation methods were adopted in this work to study the compressor flow field distribution with different flow conditions.The results show that the pressure distribution in volute is characterized by the circumferential non-uniform phenomenon and the pressure fluctuation on the high static pressure zone propagates reversely to upstream,which results in the non-axisymmetric flow inside the compressor.The non-uniform level of pressure distribution in large flow condition is higher than that in small flow condition,its effect on the upstream flow field is also stronger.Additionally,the non-uniform circumferential pressure distribution in volute brings the non-axisymmetric flow at impeller outlet.In different flow conditions,the circumferential variation of the absolute flow angle at impeller outlet is also different.Meanwhile,the non-axisymmetric flow characteristics in internal impeller can be also reflected by the distribution of the mass flow.The high static pressure region of the volute corresponds to the decrease of mass flow in upstream blade channel,while the low static pressure zone of the volute corresponds to the increase of the mass flow.In small flow condition,the mass flow difference in the blade channel is bigger than that in the large flow condition.
基金supported by National Science and Technology Major Project (J2019-Ⅱ-0011-0031)the foundation of National Key Laboratory of Science and Technology on Aerodynamic Design and Research (No. D5150230005)+1 种基金the Practice and Innovation Funds for Graduate Students of Northwestern Polytechnical University (No.PF2023091)National Natural Science Foundation of China (No.51806174)。
文摘Non-Axisymmetric Endwall Profiling(NAEP) is commonly utilized in turbines to eliminate secondary flows.Nevertheless,most of the NAEP methods consider a single-blade row environment without incorporating the effect of the stage environment.This paper aims to investigate the influence mechanism of the incoming vortex on the endwall secondary flow structures of NAEP in a highly loaded turbine cascade.To model the incoming vortex in a stage environment,this study considers a half-delta wing as the vortex generator at the upstream of the turbine cascade.The NAEP is then carried out for a highly loaded turbine cascade with an in-house numerical optimization design platform subject to no incoming vortex.Numerical simulation is also carried out under the influence of the incoming vortex for the turbine cascades with both planar and non-axisymmetric endwall.This paper furthers investigated the pitchwise effect of the incoming vortex on the near endwall secondary flow.The results indicate that the NAEP effectively improves the endwall secondary flow of the turbine cascade,where the total pressure loss coefficient and the secondary kinetic energy(SKE) are reduced by 7.3%,and 45.7%,respectively.It is further seen that with the incoming vortex,the NAEP achieves a considerable control effect on the endwall secondary flow of the turbine cascade.With incoming vortex,the NAEP can still achieve considerable control effect on the endwall secondary flow of the turbine cascade;the averaged reductions of loss coefficient and SKE are 7.8% and 14.2%,respectively.Under some pitchwise locations,incoming vortex can suppress the convection of cross-passage flow toward the suction corner greatly and reduce the loss coefficient of the baseline cascade.The incoming vortex at 4/7 pitch impinged right at the blade leading edge,leading to the generation of low-momentum fluid,which increased the size and the strength of the horseshoe vortex.Under all the pitchwise locations,NAEP can suppress the secondary vortices,e.g.,the passage vortex and the c
文摘Axisymmetric liquid jets have been studied extensively for more than one century, while non-axisymmetric jets are also very common in engineering applications but attract less concern. Based on Eulerian fluid-fluid model in Fluent software, this article analysizes the 3-D flow fields of pressure atomizers with V-shaped cut at orifice, which will result in a non-axisymmetric liquid jet. Flow rate analysis and jet structure analysis are carried out, the results show that the flow rate can be formulated by adding a correction coefficient to the formula of inviscid axisymmetric jets in atomization regime, when the Weber number is low enough to make the flow fall out of atomization regime, and the jet structure together with the flow rate formula will change. Analysis shows that the evolution of the spray and therefore the structure of the liquid jet are affected much by relative velocity and the local volume fraction of liquid phase.
