本文提出了一种高精度的二阶无源噪声整形逐次逼近型模数转换器(NS SAR ADC)。首先,采用了一种通过动态浮动反向放大器(FIA)实现kT/C噪声消除的技术,随后结合差分结构的定制电容,实现更小的电容阵列面积的同时抑制了采样热噪声。最后,...本文提出了一种高精度的二阶无源噪声整形逐次逼近型模数转换器(NS SAR ADC)。首先,采用了一种通过动态浮动反向放大器(FIA)实现kT/C噪声消除的技术,随后结合差分结构的定制电容,实现更小的电容阵列面积的同时抑制了采样热噪声。最后,采用翻转电压跟随器(FVF)结构作为动态缓冲器提取残差电压,并通过电容堆叠的操作实现无源求和,对比较器噪声与量化噪声进行了二阶整形。该设计采用0.18μm工艺实现,仿真表明,在1.8 V电源电压、8倍过采样率和2 MS/s的采样频率下,信号噪声失真比(SNDR)为88.57 dB,无杂散动态范围(SFDR)为99.09 dB,功耗仅为302μW。展开更多
为了实现较高的电容检测范围,传统的采用SAR ADC的开关电容(Switched capacitor,SC)的电容数字转换器(Capacitance to digital converter,CDC)使用高压供电提高输出摆幅,而其为了保证噪声性能又采用大电流驱动,所以显著增加了系统功耗...为了实现较高的电容检测范围,传统的采用SAR ADC的开关电容(Switched capacitor,SC)的电容数字转换器(Capacitance to digital converter,CDC)使用高压供电提高输出摆幅,而其为了保证噪声性能又采用大电流驱动,所以显著增加了系统功耗。为了解决以上问题,提出了一种基于数字放大器的电容数字转换器,将CDAC阵列作为模拟输出承担高压。仅对CDAC阵列与传感电容采用高压(5 V)驱动,而其余部分仍采用低压(1 V)供电,使得CDC在达到高动态范围与高灵敏度的同时保持低功耗、低噪声。此外,针对噪声的优化,本文一方面通过在数字放大器内加入积分环路实现SAR ADC的一阶噪声整形,降低了系统的量化噪声,提高了CDC的有效位数;另一方面通过引入有源噪声抵消(Active noise cancellation technology,ANC)技术,降低了系统的混叠噪声,提高了系统的信噪比。展开更多
Noise feedback coding （NFC） has attracted renewed interest with the recent standardization of backward-compatible enhancements for ITU-T G.711 and G.722. It has also been revisited with the emergence of proprietary ...Noise feedback coding （NFC） has attracted renewed interest with the recent standardization of backward-compatible enhancements for ITU-T G.711 and G.722. It has also been revisited with the emergence of proprietary speech codecs, such as BV16, BV32, and SILK, that have structures different from CELP coding. In this article, we review NFC and describe a novel coding technique that optimally shapes coding noise in embedded pulse-code modulation （PCM） and embedded adaptive differential PCM （ADPCM）. We describe how this new technique was incorporated into the recent ITU-T G.711.1, G.711 App. III, and G.722 Annex B （G.722B） speech-coding standards.展开更多
The successive approximation register(SAR)is one of the most energy-efficient analog-to-digital converter(ADC)architecture for medium-resolution applications.However,its high energy efficiency quickly diminishes when ...The successive approximation register(SAR)is one of the most energy-efficient analog-to-digital converter(ADC)architecture for medium-resolution applications.However,its high energy efficiency quickly diminishes when the target resolution increases.This is because a SAR ADC suffers from several major error source,including the sampling kT/C noise,the comparator noise,and the DAC mismatch.These errors are increasing hard to address in high-resolution SAR ADCs.This paper reviews recent advances on error suppression techniques for SAR ADCs,including the sampling kT/C noise reduction,the noise-shaping(NS)SAR,and the mismatch error shaping(MES).These techniques aim to boost the resolution of SAR ADCs while maintaining their superior energy efficiency.展开更多
首先采用栅压自举采样电路、比较器、全差分分段式电容阵列以及同步时序控制来实现10 bit SAR ADC的设计,在此基础上加入Sigma-Delta调制器来实现噪声整形,并将动态比较器改为4输入动态比较器以便进行电压余量求和,最终实现了12 bit NS ...首先采用栅压自举采样电路、比较器、全差分分段式电容阵列以及同步时序控制来实现10 bit SAR ADC的设计,在此基础上加入Sigma-Delta调制器来实现噪声整形,并将动态比较器改为4输入动态比较器以便进行电压余量求和,最终实现了12 bit NS SAR ADC的设计。展开更多
文摘Noise feedback coding （NFC） has attracted renewed interest with the recent standardization of backward-compatible enhancements for ITU-T G.711 and G.722. It has also been revisited with the emergence of proprietary speech codecs, such as BV16, BV32, and SILK, that have structures different from CELP coding. In this article, we review NFC and describe a novel coding technique that optimally shapes coding noise in embedded pulse-code modulation （PCM） and embedded adaptive differential PCM （ADPCM）. We describe how this new technique was incorporated into the recent ITU-T G.711.1, G.711 App. III, and G.722 Annex B （G.722B） speech-coding standards.
基金supported by National Natural Science Foundation of China(No.61904094,No.61934009)China Postdoctoral Science Foundation(No.2020M670329)Beijing Innovation Center for Future Chips(ICFC).
文摘The successive approximation register(SAR)is one of the most energy-efficient analog-to-digital converter(ADC)architecture for medium-resolution applications.However,its high energy efficiency quickly diminishes when the target resolution increases.This is because a SAR ADC suffers from several major error source,including the sampling kT/C noise,the comparator noise,and the DAC mismatch.These errors are increasing hard to address in high-resolution SAR ADCs.This paper reviews recent advances on error suppression techniques for SAR ADCs,including the sampling kT/C noise reduction,the noise-shaping(NS)SAR,and the mismatch error shaping(MES).These techniques aim to boost the resolution of SAR ADCs while maintaining their superior energy efficiency.
