Purpose–This study purposes to study the influence of artificial freezing on the liquefaction characteristics of Nanjing sand,as well as its mechanism.Design/methodology/approach–was studied through dynamic triaxial...Purpose–This study purposes to study the influence of artificial freezing on the liquefaction characteristics of Nanjing sand,as well as its mechanism.Design/methodology/approach–was studied through dynamic triaxial tests by means of the GDS dynamic triaxial system on Nanjing sand extensively discovered in the middle and lower reaches of the Yangtze River under seismic load and metro train vibration load,respectively,and potential hazards of the two loads to the freezing construction of Nanjing sand were also identified in the tests.Findings–The results show that under both seismic load and metro train vibration load,freeze-thaw cycles will significantly reduce the stiffness and liquefaction resistance of Nanjing sand,especially in the first freezethaw cycle;the more freeze-thaw cycles,the worse structural behaviors of silty-fine sand,and the easier to liquefy;freeze-thaw cycles will increase the sensitivity of Nanjing sand’s dynamic pore pressure to dynamic load response;the lower the freezing temperature and the effective confining pressure,the worse the liquefaction resistance of Nanjing sand after freeze-thaw cycles;compared to the metro train vibration load,the seismic load in Nanjing is potentially less dangerous to freezing construction of Nanjing sand.Originality/value–The research results are helpful to the construction of the artificial ground freezing of the subway crossing passage in the lower reaches of the Yangtze River and to ensure the construction safety of the subway tunnel and its crossing passage.展开更多
By using GDS dynamic hollow cylinder torsional apparatus, a series of cyclic torsional triaxial tests under complex initial consolidation condition are performed on Nanjing saturated fine sand. The effects of the init...By using GDS dynamic hollow cylinder torsional apparatus, a series of cyclic torsional triaxial tests under complex initial consolidation condition are performed on Nanjing saturated fine sand. The effects of the initial principal stress direction αo, the initial ratio of deviatoric stress η0, the initial average effective principal stress Po and the initial intermediate principal stress parameter b0 on the threshold shear strain γt of Nanjing saturated fine sand are then systematically investigated. The results show that γt increases as η0,p0 and b0 increase respectively, while the other three parameters remain constant. ao has a great influence on γt, which is reduced when ao increases from 0° to 45°and increased when α0 increases from 45° to 90°. The effect of α0 on γt, plays a leading role and the effect of η0 will weaken when ao is approximately 45°.展开更多
This paper mainly investigates the effects of initial static shear stress and grain shape on the liquefaction induced large deformation of saturated sand under torsional shear.Nanjing sand,mainly composed of platy gra...This paper mainly investigates the effects of initial static shear stress and grain shape on the liquefaction induced large deformation of saturated sand under torsional shear.Nanjing sand,mainly composed of platy grains,is tested with different initial static shear stress ratio(SSR)using a hollow column torsional shear apparatus.The tests find that the saturated Nanjing sand reaches full liquefaction under the superposition of initial static shear stress and cyclic stress for both stress reversal and non-reversal cases.However,it requires a large number of loading cycles to reach full liquefaction if stress reversal does not occur.With increasing the initial static stress,the large deformation of the Nanjing sand should mainly induced by the cyclic liquefaction firstly under a smaller initial shear stress,and then it should be induced by the residual deformation failure.The critical point occurs approximately when the initial shear stress is close to the amplitude of the cyclic shear stress.Meanwhile,it shows that grain angularity increases the liquefaction resistance when the initial static shear stress is zero.A small initial static shear stress causes the larger loss of liquefaction resistance for angular sand than rounded sand.At a high initial SSR,the angular sand is more resistant to the large residual deformation failure than the rounded sand.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.U41702299).
文摘Purpose–This study purposes to study the influence of artificial freezing on the liquefaction characteristics of Nanjing sand,as well as its mechanism.Design/methodology/approach–was studied through dynamic triaxial tests by means of the GDS dynamic triaxial system on Nanjing sand extensively discovered in the middle and lower reaches of the Yangtze River under seismic load and metro train vibration load,respectively,and potential hazards of the two loads to the freezing construction of Nanjing sand were also identified in the tests.Findings–The results show that under both seismic load and metro train vibration load,freeze-thaw cycles will significantly reduce the stiffness and liquefaction resistance of Nanjing sand,especially in the first freezethaw cycle;the more freeze-thaw cycles,the worse structural behaviors of silty-fine sand,and the easier to liquefy;freeze-thaw cycles will increase the sensitivity of Nanjing sand’s dynamic pore pressure to dynamic load response;the lower the freezing temperature and the effective confining pressure,the worse the liquefaction resistance of Nanjing sand after freeze-thaw cycles;compared to the metro train vibration load,the seismic load in Nanjing is potentially less dangerous to freezing construction of Nanjing sand.Originality/value–The research results are helpful to the construction of the artificial ground freezing of the subway crossing passage in the lower reaches of the Yangtze River and to ensure the construction safety of the subway tunnel and its crossing passage.
基金supported by the Key Research Project of National Natural Science Foundation of China under grant No. 90715018the Special Fund for the Commonweal Industry of China under grant No. 200808022the Key Basic Research Program of Natural Science of University in Jiangsu Province under grant No. 08KJA560001
文摘By using GDS dynamic hollow cylinder torsional apparatus, a series of cyclic torsional triaxial tests under complex initial consolidation condition are performed on Nanjing saturated fine sand. The effects of the initial principal stress direction αo, the initial ratio of deviatoric stress η0, the initial average effective principal stress Po and the initial intermediate principal stress parameter b0 on the threshold shear strain γt of Nanjing saturated fine sand are then systematically investigated. The results show that γt increases as η0,p0 and b0 increase respectively, while the other three parameters remain constant. ao has a great influence on γt, which is reduced when ao increases from 0° to 45°and increased when α0 increases from 45° to 90°. The effect of α0 on γt, plays a leading role and the effect of η0 will weaken when ao is approximately 45°.
基金supported by the National Natural Science Foundation of China(Nos.51778290,51778386)the National Science Fund for Distinguished Young Scholars(No.51725802)the Natural Science Foundation of Jiangsu High School(No.16KJA560001)。
文摘This paper mainly investigates the effects of initial static shear stress and grain shape on the liquefaction induced large deformation of saturated sand under torsional shear.Nanjing sand,mainly composed of platy grains,is tested with different initial static shear stress ratio(SSR)using a hollow column torsional shear apparatus.The tests find that the saturated Nanjing sand reaches full liquefaction under the superposition of initial static shear stress and cyclic stress for both stress reversal and non-reversal cases.However,it requires a large number of loading cycles to reach full liquefaction if stress reversal does not occur.With increasing the initial static stress,the large deformation of the Nanjing sand should mainly induced by the cyclic liquefaction firstly under a smaller initial shear stress,and then it should be induced by the residual deformation failure.The critical point occurs approximately when the initial shear stress is close to the amplitude of the cyclic shear stress.Meanwhile,it shows that grain angularity increases the liquefaction resistance when the initial static shear stress is zero.A small initial static shear stress causes the larger loss of liquefaction resistance for angular sand than rounded sand.At a high initial SSR,the angular sand is more resistant to the large residual deformation failure than the rounded sand.
