Nestled inthehistoric Liwan District of Guangzhou,HakTang emerges as a creative sanctuary housed within the majestic confines of an early 2Oth-century Cantonesemansion.Oncethe residence bought by the greatgrandfather ...Nestled inthehistoric Liwan District of Guangzhou,HakTang emerges as a creative sanctuary housed within the majestic confines of an early 2Oth-century Cantonesemansion.Oncethe residence bought by the greatgrandfather of the current curator,Gogo,in 1941,this grand house at No.7,Feng Yuan East Street,has been lovinglyrestored to its former glory after decades of neglect and misuse.展开更多
[Objective] This study aimed to study the effects of different picking time and storage environment on fruit quality of a pear cultivar Xinlin No.7 and the relationship between storage environment and fruit quality, s...[Objective] This study aimed to study the effects of different picking time and storage environment on fruit quality of a pear cultivar Xinlin No.7 and the relationship between storage environment and fruit quality, so as to provide a theoretical basis for storage and preservation of Xinli No.7. [Method] The fruits of Xinli NO.7 were picked up in August （optimal） and September respectively and then stored in room, cellar and freezer, respectively. The dynamics in temperature, humidity, CO2 concentration, fruit weight loss rate, pericarp chlorophyll content and fruit interior quality were determined. [Result] The environment differed significantly among different storage methods. In room and cellar, the temperature showed a downward trend, and the humidity decreased after early-mid October. The CO2 concentration changed steadily, and increased rapidly in cellar after December. In freezer, the temperature and humidity changed steadily, and the CO2 concentration increased after October. The changes in quality of the fruits harvested in August and September were similar. There was a certain correlation between storage environment and fruit quality of Xinli No.7. In room and cellar, the variation trends of tem- perature and humidity were consistent with those of chlorophyll content, fruit hardness and titratable acid content with positive correlations, but were opposite from those of fruit weight loss rate, soluble solids content and soluble sugar content with negative correlations. In freezer, the CO2 concentration was closely related to the changes in fruit quality. Its variation trend was consistent with those of fruit weight loss rate and soluble solids content, but was opposite from those of pericarp chlorophyll content, fruit firmness, soluble sugar content and titratable acid content. The differences in some of the traits reached significant levels （P〈0.05, P〈0.01）. [Conclusion] With the extension of storage time, the temperature, humidity and CO2 concentration changed according to different pattern展开更多
建立了测定炸药FOX7中3种阴离子的离子色谱分析方法,并用该方法测定了炸药FOX7。采用离子色谱检测法,以Metrosep A Supp5-250型阴离子柱为色谱柱;3.2 mmol/L Na2CO3+1.0 mmol/L Na HCO3为流动相,流速为0.7 m L/min。结果表明:测定SO2-4...建立了测定炸药FOX7中3种阴离子的离子色谱分析方法,并用该方法测定了炸药FOX7。采用离子色谱检测法,以Metrosep A Supp5-250型阴离子柱为色谱柱;3.2 mmol/L Na2CO3+1.0 mmol/L Na HCO3为流动相,流速为0.7 m L/min。结果表明:测定SO2-4、NO-3、Cl-三种离子的精密度试验、重复性试验、加样回收率试验的RSD均小于3.0%,平均回收率(n=6)分别为99.1%,98.4%和99.0%。方法快速,准确,可用于炸药FOX7的质量控制。展开更多
BACKGROUND Lateral facial clefts are atypical with a low incidence in the facial cleft spectrum.With the development of ultrasonography(US)prenatal screening,such facial malformations can be detected and diagnosed pre...BACKGROUND Lateral facial clefts are atypical with a low incidence in the facial cleft spectrum.With the development of ultrasonography(US)prenatal screening,such facial malformations can be detected and diagnosed prenatally rather than at birth.Although three-dimensional US(3DUS)can render the fetus'face via 3D reconstruction,the 3D images are displayed on two-dimensional screens without field depth,which impedes the understanding of untrained individuals.In contrast,a 3D-printed model of the fetus'face helps both parents and doctors develop a more comprehensive understanding of the facial malformation by creating more interactive aspects.Herein,we present an isolated lateral facial cleft case that was diagnosed via US combined with a 3D-printed model.CASE SUMMARY A 31-year-old G2P1 patient presented for routine prenatal screening at the 22nd wk of gestation.The coronal nostril-lip section of two-dimensional US(2DUS)demonstrated that the fetus'bilateral oral commissures were asymmetrical,and left oral commissure was abnormally wide.The left oblique-coronal section showed a cleft at the left oral commissure which extended to the left cheek.The results of 3DUS confirmed the cleft.Furthermore,we created a model of the fetal face using 3D printing technology,which clearly presented facial malformations.The fetus was diagnosed with a left lateral facial cleft,which was categorized as a No.7 facial cleft according to the Tessier facial cleft classification.The parents terminated the pregnancy at the 24th wk of gestation after parental counseling.CONCLUSION In the diagnostic course of the current case,in addition to the traditional application of 2D and 3DUS,we created a 3D-printed model of the fetus,which enhanced diagnostic evidence,benefited the education of junior doctors,improved parental counseling,and had the potential to guide surgical planning.展开更多
State Administration for Market Regulation and Standardization Administration of China have approved the following 431 national standards and 2 national standards with amendment.
文摘Nestled inthehistoric Liwan District of Guangzhou,HakTang emerges as a creative sanctuary housed within the majestic confines of an early 2Oth-century Cantonesemansion.Oncethe residence bought by the greatgrandfather of the current curator,Gogo,in 1941,this grand house at No.7,Feng Yuan East Street,has been lovinglyrestored to its former glory after decades of neglect and misuse.
文摘[Objective] This study aimed to study the effects of different picking time and storage environment on fruit quality of a pear cultivar Xinlin No.7 and the relationship between storage environment and fruit quality, so as to provide a theoretical basis for storage and preservation of Xinli No.7. [Method] The fruits of Xinli NO.7 were picked up in August （optimal） and September respectively and then stored in room, cellar and freezer, respectively. The dynamics in temperature, humidity, CO2 concentration, fruit weight loss rate, pericarp chlorophyll content and fruit interior quality were determined. [Result] The environment differed significantly among different storage methods. In room and cellar, the temperature showed a downward trend, and the humidity decreased after early-mid October. The CO2 concentration changed steadily, and increased rapidly in cellar after December. In freezer, the temperature and humidity changed steadily, and the CO2 concentration increased after October. The changes in quality of the fruits harvested in August and September were similar. There was a certain correlation between storage environment and fruit quality of Xinli No.7. In room and cellar, the variation trends of tem- perature and humidity were consistent with those of chlorophyll content, fruit hardness and titratable acid content with positive correlations, but were opposite from those of fruit weight loss rate, soluble solids content and soluble sugar content with negative correlations. In freezer, the CO2 concentration was closely related to the changes in fruit quality. Its variation trend was consistent with those of fruit weight loss rate and soluble solids content, but was opposite from those of pericarp chlorophyll content, fruit firmness, soluble sugar content and titratable acid content. The differences in some of the traits reached significant levels （P〈0.05, P〈0.01）. [Conclusion] With the extension of storage time, the temperature, humidity and CO2 concentration changed according to different pattern
文摘建立了测定炸药FOX7中3种阴离子的离子色谱分析方法,并用该方法测定了炸药FOX7。采用离子色谱检测法,以Metrosep A Supp5-250型阴离子柱为色谱柱;3.2 mmol/L Na2CO3+1.0 mmol/L Na HCO3为流动相,流速为0.7 m L/min。结果表明:测定SO2-4、NO-3、Cl-三种离子的精密度试验、重复性试验、加样回收率试验的RSD均小于3.0%,平均回收率(n=6)分别为99.1%,98.4%和99.0%。方法快速,准确,可用于炸药FOX7的质量控制。
文摘BACKGROUND Lateral facial clefts are atypical with a low incidence in the facial cleft spectrum.With the development of ultrasonography(US)prenatal screening,such facial malformations can be detected and diagnosed prenatally rather than at birth.Although three-dimensional US(3DUS)can render the fetus'face via 3D reconstruction,the 3D images are displayed on two-dimensional screens without field depth,which impedes the understanding of untrained individuals.In contrast,a 3D-printed model of the fetus'face helps both parents and doctors develop a more comprehensive understanding of the facial malformation by creating more interactive aspects.Herein,we present an isolated lateral facial cleft case that was diagnosed via US combined with a 3D-printed model.CASE SUMMARY A 31-year-old G2P1 patient presented for routine prenatal screening at the 22nd wk of gestation.The coronal nostril-lip section of two-dimensional US(2DUS)demonstrated that the fetus'bilateral oral commissures were asymmetrical,and left oral commissure was abnormally wide.The left oblique-coronal section showed a cleft at the left oral commissure which extended to the left cheek.The results of 3DUS confirmed the cleft.Furthermore,we created a model of the fetal face using 3D printing technology,which clearly presented facial malformations.The fetus was diagnosed with a left lateral facial cleft,which was categorized as a No.7 facial cleft according to the Tessier facial cleft classification.The parents terminated the pregnancy at the 24th wk of gestation after parental counseling.CONCLUSION In the diagnostic course of the current case,in addition to the traditional application of 2D and 3DUS,we created a 3D-printed model of the fetus,which enhanced diagnostic evidence,benefited the education of junior doctors,improved parental counseling,and had the potential to guide surgical planning.
文摘State Administration for Market Regulation and Standardization Administration of China have approved the following 431 national standards and 2 national standards with amendment.
