Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two add...Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two additives on electrodeposition behavior, composition, morphology, and corrosion performance of the Zn-Ni alloys were investigated. The electrodeposition behaviors of Zn-Ni alloy revealed by the cyclic voltammetry show that the addition of EDTA to the Zn-Ni electrolyte enhances the Zn incorporation into the alloy film while the addition of NH4C1 produces an opposite effect by suppressing Zn incorporation into the film. With an increase of EDTA concentration in the electrolyte, the Zn content of the Zn-Ni films increases, while the grain size of the deposits and the current efficiency of the plating process decrease. The increase of NH4C1 concentration in the electrolyte would significantly refine the grain size of the electrodeposited Zn-Ni films, reduce the Zn content and increase the cathodic current efficiency. The corrosion testing indicates that the barrier corrosion resistances of Zn-Ni films electrodeposited from NHnC1 containing electrolytes are superior to those electrodeposited from EDTA-containing electrolytes, which in turn are superior to those electrodeposited from additive-free electrolytes.展开更多
An effective method for the regeneration of thermally deactivated commercial monolith SCR catalysts was investigated. Two types of regenerated solutions, namely NH4C1 （l mol/L） and dilute H2SO4 （0.5 tool/L）, were ...An effective method for the regeneration of thermally deactivated commercial monolith SCR catalysts was investigated. Two types of regenerated solutions, namely NH4C1 （l mol/L） and dilute H2SO4 （0.5 tool/L）, were employed to treat the used catalyst. The effects of temperature and the regeneration process on the structural and textural properties of the catalysts were determined by X-ray diffraction, scanning electron microscopy, N2 adsorption/desorption, elemental analysis and Fourier transform infrared spectroscopy. The results suggest that the anatase phase of the used catalyst is maintained after exposure to high temperatures. Some of the catalytic activity was restored after regeneration. The catalyst regenerated by aqueous NH4C1 had a higher activity than that of the catalyst treated by dilute H2SO4. The main reason is that the NH3 generated from the decomposition of NH4C1 at high temperatures can be adsorbed onto the catalyst which promotes the reaction. The aggregated V205 were partially re-dispersed during the regeneration process, and the intrinsic oxidation of ammonia with high concentrations of O2 is a factorthat suppresses the catalytic activity.展开更多
基金Projects(51271169,51001089) supported by the National Natural Science Foundation of China
文摘Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two additives on electrodeposition behavior, composition, morphology, and corrosion performance of the Zn-Ni alloys were investigated. The electrodeposition behaviors of Zn-Ni alloy revealed by the cyclic voltammetry show that the addition of EDTA to the Zn-Ni electrolyte enhances the Zn incorporation into the alloy film while the addition of NH4C1 produces an opposite effect by suppressing Zn incorporation into the film. With an increase of EDTA concentration in the electrolyte, the Zn content of the Zn-Ni films increases, while the grain size of the deposits and the current efficiency of the plating process decrease. The increase of NH4C1 concentration in the electrolyte would significantly refine the grain size of the electrodeposited Zn-Ni films, reduce the Zn content and increase the cathodic current efficiency. The corrosion testing indicates that the barrier corrosion resistances of Zn-Ni films electrodeposited from NHnC1 containing electrolytes are superior to those electrodeposited from EDTA-containing electrolytes, which in turn are superior to those electrodeposited from additive-free electrolytes.
文摘An effective method for the regeneration of thermally deactivated commercial monolith SCR catalysts was investigated. Two types of regenerated solutions, namely NH4C1 （l mol/L） and dilute H2SO4 （0.5 tool/L）, were employed to treat the used catalyst. The effects of temperature and the regeneration process on the structural and textural properties of the catalysts were determined by X-ray diffraction, scanning electron microscopy, N2 adsorption/desorption, elemental analysis and Fourier transform infrared spectroscopy. The results suggest that the anatase phase of the used catalyst is maintained after exposure to high temperatures. Some of the catalytic activity was restored after regeneration. The catalyst regenerated by aqueous NH4C1 had a higher activity than that of the catalyst treated by dilute H2SO4. The main reason is that the NH3 generated from the decomposition of NH4C1 at high temperatures can be adsorbed onto the catalyst which promotes the reaction. The aggregated V205 were partially re-dispersed during the regeneration process, and the intrinsic oxidation of ammonia with high concentrations of O2 is a factorthat suppresses the catalytic activity.
