It is over 110 years since the term Mass Elevation Effect(MEE) was proposed by A. D. Quervain in 1904. The quantitative study of MEE has been explored in the Tibetan Plateau in recent years; however, the spatial distr...It is over 110 years since the term Mass Elevation Effect(MEE) was proposed by A. D. Quervain in 1904. The quantitative study of MEE has been explored in the Tibetan Plateau in recent years; however, the spatial distribution of MEE and its impact on the ecological pattern of the plateau are seldom known. In this study, we used a new method to estimate MEE in different regions of the plateau, and, then analyzed the distribution pattern of MEE, and the relationships among MEE, climate, and the altitudinal distribution of timberlines and snowlines in the Plateau. The main results are as follows:(1) The spatial distribution of MEE in the Tibetan Plateau roughly takes on an eccentric ellipse in northwestsoutheast trend. The Chang Tang Plateau and the middle part of the Kunlun Mountains are the core area of MEE, where occurs the highest MEE of above 11℃; and MEE tends to decreases from this core area northwestward, northeastward and southward;(2) The distance away from the core zone of the plateau is also a very important factor for MEE magnitude, because MEE is obviously higher in the interior than in the exterior of the plateau even with similar mountain base elevation(MBE).(3) The impacts of MEE on the altitudinal distribution of timberlines and snowlines are similar, i.e., the higher the MEE, the higher timberlines and snowlines. The highest timberline(4600–4800 m) appears in the lakes and basins north of the Himalayas and in the upper and middle reach valleys of the Yarlung Zangbo River, where the estimated MEE is 10.2822℃–10.6904℃. The highest snowline(6000–6200 m) occurs in the southwest of the Chang Tang Plateau, where the estimated MEE is 11.2059°C–11.5488℃.展开更多
Mass elevation effect （MEE） refers to the thermal effect of huge mountains or plateaus, which causes the tendency for tem- perature-related montane landscape limits to occur at higher elevations in the inner massifs...Mass elevation effect （MEE） refers to the thermal effect of huge mountains or plateaus, which causes the tendency for tem- perature-related montane landscape limits to occur at higher elevations in the inner massifs than on their outer margins. MEE has been widely identified in all large mountains, but how it could be measured and what its main forming-factors are still remain open. This paper, supposing that the local mountain base elevation （MBE） is the main factor of MEE, takes the Qinghai-Tibet Plateau （QTP） as the study area, defines MEE as the temperature difference （AT） between the inner and outer parts of mountain massifs, identifies the main forming factors, and analyzes their contributions to MEE. A total of 73 mountain bases were identified, ranging from 708 m to 5081 m and increasing from the edges to the central parts of the plateau. Climate data （1981-2010） from 134 meteorological stations were used to acquire ATby comparing near-surface air temperature on the main plateau with the free-air temperature at the same altitude and simi- lar latitude outside of the plateau. The AT for the warmest month is averagely 6.15 ~C, over 12~C at Lhatse and Baxoi. A multivariate linear regression model was developed to simulate MEE based on three variables （latitude, annual mean precipitation and MBE）, which are all significantly correlated to AT. The model could explain 67.3% of MEE variation, and the contribution rates of three independent variables to MEE are 35.29%, 22.69% and 42.02%, respectively. This confirms that MBE is the main factor of MEE. The intensive MEE of the QTP pushes the 10~C isotherm of the warmest month mean temperature 1300-2000 m higher in the main plateau than in the outer regions, leading the occurrence of the highest timberline （4900 m） and the highest snowline （6200 m） of the Northern Hemisphere in the southeast and southwest of the plateau, respectively.展开更多
This article makes the first attempt in assessing the influence of active constrained layer damping(ACLD)treatment towards precise control of frequency responses of functionally graded skew-magneto-electroelastic(FGSM...This article makes the first attempt in assessing the influence of active constrained layer damping(ACLD)treatment towards precise control of frequency responses of functionally graded skew-magneto-electroelastic(FGSMEE)plates by employing finite element methods.The materials are functionally graded across the thickness of the plate in terms of modest power-law distributions.The principal equations of motion of FGSMEE are derived via Hamilton’s principle and solved using condensation technique.The effect of ACLD patches are modelled by following the complex modulus approach(CMA).Additionally,distinctive emphasis is laid to evaluate the influence of geometrical skewness on the attenuation capabilities of the plate.The accuracy of the current analysis is corroborated with comparison of previous researches of similar kind.Additionally,a complete parametric study is directed to understand the combined impacts of various factors like coupling fields,patch location,fiber orientation of piezoelectric patch in association with skew angle and power-law index.展开更多
基金supported by the Natural Science Foundation of China (Grant Nos. 41401111 and 41601091)National Key R&D Program of China (2017FY100900)
文摘It is over 110 years since the term Mass Elevation Effect(MEE) was proposed by A. D. Quervain in 1904. The quantitative study of MEE has been explored in the Tibetan Plateau in recent years; however, the spatial distribution of MEE and its impact on the ecological pattern of the plateau are seldom known. In this study, we used a new method to estimate MEE in different regions of the plateau, and, then analyzed the distribution pattern of MEE, and the relationships among MEE, climate, and the altitudinal distribution of timberlines and snowlines in the Plateau. The main results are as follows:(1) The spatial distribution of MEE in the Tibetan Plateau roughly takes on an eccentric ellipse in northwestsoutheast trend. The Chang Tang Plateau and the middle part of the Kunlun Mountains are the core area of MEE, where occurs the highest MEE of above 11℃; and MEE tends to decreases from this core area northwestward, northeastward and southward;(2) The distance away from the core zone of the plateau is also a very important factor for MEE magnitude, because MEE is obviously higher in the interior than in the exterior of the plateau even with similar mountain base elevation(MBE).(3) The impacts of MEE on the altitudinal distribution of timberlines and snowlines are similar, i.e., the higher the MEE, the higher timberlines and snowlines. The highest timberline(4600–4800 m) appears in the lakes and basins north of the Himalayas and in the upper and middle reach valleys of the Yarlung Zangbo River, where the estimated MEE is 10.2822℃–10.6904℃. The highest snowline(6000–6200 m) occurs in the southwest of the Chang Tang Plateau, where the estimated MEE is 11.2059°C–11.5488℃.
基金National Natural Science Foundation of China(No.41571099,41030528)
文摘Mass elevation effect （MEE） refers to the thermal effect of huge mountains or plateaus, which causes the tendency for tem- perature-related montane landscape limits to occur at higher elevations in the inner massifs than on their outer margins. MEE has been widely identified in all large mountains, but how it could be measured and what its main forming-factors are still remain open. This paper, supposing that the local mountain base elevation （MBE） is the main factor of MEE, takes the Qinghai-Tibet Plateau （QTP） as the study area, defines MEE as the temperature difference （AT） between the inner and outer parts of mountain massifs, identifies the main forming factors, and analyzes their contributions to MEE. A total of 73 mountain bases were identified, ranging from 708 m to 5081 m and increasing from the edges to the central parts of the plateau. Climate data （1981-2010） from 134 meteorological stations were used to acquire ATby comparing near-surface air temperature on the main plateau with the free-air temperature at the same altitude and simi- lar latitude outside of the plateau. The AT for the warmest month is averagely 6.15 ~C, over 12~C at Lhatse and Baxoi. A multivariate linear regression model was developed to simulate MEE based on three variables （latitude, annual mean precipitation and MBE）, which are all significantly correlated to AT. The model could explain 67.3% of MEE variation, and the contribution rates of three independent variables to MEE are 35.29%, 22.69% and 42.02%, respectively. This confirms that MBE is the main factor of MEE. The intensive MEE of the QTP pushes the 10~C isotherm of the warmest month mean temperature 1300-2000 m higher in the main plateau than in the outer regions, leading the occurrence of the highest timberline （4900 m） and the highest snowline （6200 m） of the Northern Hemisphere in the southeast and southwest of the plateau, respectively.
文摘This article makes the first attempt in assessing the influence of active constrained layer damping(ACLD)treatment towards precise control of frequency responses of functionally graded skew-magneto-electroelastic(FGSMEE)plates by employing finite element methods.The materials are functionally graded across the thickness of the plate in terms of modest power-law distributions.The principal equations of motion of FGSMEE are derived via Hamilton’s principle and solved using condensation technique.The effect of ACLD patches are modelled by following the complex modulus approach(CMA).Additionally,distinctive emphasis is laid to evaluate the influence of geometrical skewness on the attenuation capabilities of the plate.The accuracy of the current analysis is corroborated with comparison of previous researches of similar kind.Additionally,a complete parametric study is directed to understand the combined impacts of various factors like coupling fields,patch location,fiber orientation of piezoelectric patch in association with skew angle and power-law index.
