Microwave absorbing materials(MAMs)has been intensively investigated in order to meet the requirement of electromagnetic radiation control,especially in S and C band.In this work,FeCo-based magnetic MAMs are hydrother...Microwave absorbing materials(MAMs)has been intensively investigated in order to meet the requirement of electromagnetic radiation control,especially in S and C band.In this work,FeCo-based magnetic MAMs are hydrothermally synthesized via a magnetic-field-induced process.The composition and morphology of the MAMs are capable of being adjusted simultaneously by the atomic ratio of Fe2+to Co2+in the precursor.The hierarchical magnetic microchain,which has a core–shell structure of twodimensional FexCo1−xOOH nanosheets anchored vertically on the surface of a one-dimensional(1D)Co microchain,shows significantly enhanced microwave absorption in C band,resulting in a reflection loss(RL)of lower than−20 dB at frequencies ranging from 4.4 to 8.0 GHz under a suitable matching thickness.The magnetic coupling of Co microcrystals and the double-loss mechanisms out of the core-shell structure are considered to promote the microwave attenuation capability.The hierarchical design of 1D magnetic MAMs provides a feasible strategy to solve the electromagnetic pollution in C band.展开更多
针对电力变压器漏磁场和杂散损耗计算以及局部过热的问题,笔者采用三维非线性涡流场有限元方法对一台电力变压器进行了漏磁场及杂散损耗的计算与分析。应用MagNet有限元分析软件计算得到变压器油箱及夹件的杂散损耗及损耗密度分布,为了...针对电力变压器漏磁场和杂散损耗计算以及局部过热的问题,笔者采用三维非线性涡流场有限元方法对一台电力变压器进行了漏磁场及杂散损耗的计算与分析。应用MagNet有限元分析软件计算得到变压器油箱及夹件的杂散损耗及损耗密度分布,为了克服杂散损耗以及损耗密度过大引起的局部过热问题,对变压器采取屏蔽措施,并分析屏蔽对变压器杂散损耗、损耗密度以及漏磁场的影响。分析结果表明,通过实际变压器与TEAM Problem 21基准族模型验证了本文所采用损耗计算方法的计算值与测量值的误差在2%以内,从而验证了计算分析的正确性;采取屏蔽措施后变压器油箱和夹件的杂散损耗分别降低了38%和48.9%。展开更多
Exploring lightweight microwave attenuation materials with strong and tunable wideband microwave absorption is highly desirable but remains a significant challenge. Herein, three-dimensional （3D） porous hybrid compo...Exploring lightweight microwave attenuation materials with strong and tunable wideband microwave absorption is highly desirable but remains a significant challenge. Herein, three-dimensional （3D） porous hybrid composites consisting of NiFe nanoparticles embedded within carbon nanocubes decorated on graphene oxide （GO） sheets （NiFe@C nanocubes@GO） as high-performance microwave attenuation materials have been rationally synthesized. The 3D porous hybrid composites are fabricated by a simple method, which involves one-step pyrolysis of NiFe Prussian blue analogue nanocubes in the presence of GO sheets. Benefiting from the unique structural features that exhibit good magnetic and dielectric losses as well as a proper impedance match, the resulting NiFe@C nanocubes@GO composites show excellent microwave attenuation ability. With a minimum reflection loss （RL） of -51 dB at 7.7 GHz at a thickness of 2.8 mm and maximum percentage bandwidth of 38.6% for RL 〈 -10 dB at a thickness of 2.2 mm, the NiFe@C nanocubes@GO composites are superior to the previously reported state-of-the-art carbon-based microwave attenuation materials.展开更多
To achieve excellent electromagnetic wave(EMW)absorption properties,the microstructure design of the absorber is critical.In this work,six kinds of N-Ni/C nanostructures with different morphologies were prepared by on...To achieve excellent electromagnetic wave(EMW)absorption properties,the microstructure design of the absorber is critical.In this work,six kinds of N-Ni/C nanostructures with different morphologies were prepared by one-step hydrothermal method and high temperature carbonization by adjusting the types of nickel salts and reaction solvents.The EMW absorption performance of six different morphologies of N-Ni/C nanostructures was compared and analyzed.Among them,it is found that the nanoflowerlike N-Ni/C composite has excellent dielectric loss and magnetic loss synergistic effect due to its polycrystalline structure,and can obtain excellent EMW absorption performance.The minimum reflection loss value at a thickness of 1.9 mm is-59.56 dB at 16.88 GHz,and the effective absorption bandwidth value reaches 6.0 GHz at a thickness of 2.2 mm.Our research shows that different morphologies and multiple lattice structures of nanostructures with the same composition have a significant influence on EMW absorption performance,which provides new research ideas for developing high-performance EMW absorbing materials.展开更多
Developing a flexible,light-weight and effective electromagnetic(EM)absorber remains challenging despite being on increasing demand as more wearable devices and portable electronics are commercialized.Herein,we report...Developing a flexible,light-weight and effective electromagnetic(EM)absorber remains challenging despite being on increasing demand as more wearable devices and portable electronics are commercialized.Herein,we report a flexible and lightweight hybrid paper by a facile vacuumfiltration-induced self-assembly process,in which cotton-derived carbon fibers serve as flexible skeletons,compactly surrounded by other microwave-attenuating components(reduced graphene oxide and Fe3O4@C nanowires).Owing to its unique architecture and synergy of the three components,the asprepared hybrid paper exhibits flexible and lightweight features as well as superb microwave absorption performance.Maximum absorption intensity with reflection loss as low as-63 dB can be achieved,and its broadest frequency absorption bandwidth of 5.8 GHz almost covers the entire Ku band.Such a hybrid paper is promising to cope with ever-increasing EM interference.The work also paves the way to develop low-cost and flexible EM wave absorber from biomass through a facile method.展开更多
基金The authors are grateful for the supports from the National Natural Science Foundation of China(No.U21A2093)This work was also financially supported by the Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘Microwave absorbing materials(MAMs)has been intensively investigated in order to meet the requirement of electromagnetic radiation control,especially in S and C band.In this work,FeCo-based magnetic MAMs are hydrothermally synthesized via a magnetic-field-induced process.The composition and morphology of the MAMs are capable of being adjusted simultaneously by the atomic ratio of Fe2+to Co2+in the precursor.The hierarchical magnetic microchain,which has a core–shell structure of twodimensional FexCo1−xOOH nanosheets anchored vertically on the surface of a one-dimensional(1D)Co microchain,shows significantly enhanced microwave absorption in C band,resulting in a reflection loss(RL)of lower than−20 dB at frequencies ranging from 4.4 to 8.0 GHz under a suitable matching thickness.The magnetic coupling of Co microcrystals and the double-loss mechanisms out of the core-shell structure are considered to promote the microwave attenuation capability.The hierarchical design of 1D magnetic MAMs provides a feasible strategy to solve the electromagnetic pollution in C band.
文摘针对电力变压器漏磁场和杂散损耗计算以及局部过热的问题,笔者采用三维非线性涡流场有限元方法对一台电力变压器进行了漏磁场及杂散损耗的计算与分析。应用MagNet有限元分析软件计算得到变压器油箱及夹件的杂散损耗及损耗密度分布,为了克服杂散损耗以及损耗密度过大引起的局部过热问题,对变压器采取屏蔽措施,并分析屏蔽对变压器杂散损耗、损耗密度以及漏磁场的影响。分析结果表明,通过实际变压器与TEAM Problem 21基准族模型验证了本文所采用损耗计算方法的计算值与测量值的误差在2%以内,从而验证了计算分析的正确性;采取屏蔽措施后变压器油箱和夹件的杂散损耗分别降低了38%和48.9%。
基金This work was financially supported by the National Natural Science Foundation of China （Nos. 51102278, 51672049, 51602154 and 11575085）, Start-up Grant of Fudan University （No. JIJH2021001）, the Aeronautics Science Foundation of China （No. 2014ZF52072） and the Priority Academic Program Development of Jiangsu Higher Education Institutions （PAPD）.
文摘Exploring lightweight microwave attenuation materials with strong and tunable wideband microwave absorption is highly desirable but remains a significant challenge. Herein, three-dimensional （3D） porous hybrid composites consisting of NiFe nanoparticles embedded within carbon nanocubes decorated on graphene oxide （GO） sheets （NiFe@C nanocubes@GO） as high-performance microwave attenuation materials have been rationally synthesized. The 3D porous hybrid composites are fabricated by a simple method, which involves one-step pyrolysis of NiFe Prussian blue analogue nanocubes in the presence of GO sheets. Benefiting from the unique structural features that exhibit good magnetic and dielectric losses as well as a proper impedance match, the resulting NiFe@C nanocubes@GO composites show excellent microwave attenuation ability. With a minimum reflection loss （RL） of -51 dB at 7.7 GHz at a thickness of 2.8 mm and maximum percentage bandwidth of 38.6% for RL 〈 -10 dB at a thickness of 2.2 mm, the NiFe@C nanocubes@GO composites are superior to the previously reported state-of-the-art carbon-based microwave attenuation materials.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51407134 and 52002196)the Natural Science Foundation of Shandong Province(Nos.ZR2019YQ24 and ZR2020QF084)+2 种基金the Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural-Functional Polymer Composites)the Special Financial of Shandong Province(Structural Design of High-efficiency Electromagnetic Wave-absorbing Composite Materials and Construction of Shandong Provincial Talent Teams(No.37000022P990304116449)).
文摘To achieve excellent electromagnetic wave(EMW)absorption properties,the microstructure design of the absorber is critical.In this work,six kinds of N-Ni/C nanostructures with different morphologies were prepared by one-step hydrothermal method and high temperature carbonization by adjusting the types of nickel salts and reaction solvents.The EMW absorption performance of six different morphologies of N-Ni/C nanostructures was compared and analyzed.Among them,it is found that the nanoflowerlike N-Ni/C composite has excellent dielectric loss and magnetic loss synergistic effect due to its polycrystalline structure,and can obtain excellent EMW absorption performance.The minimum reflection loss value at a thickness of 1.9 mm is-59.56 dB at 16.88 GHz,and the effective absorption bandwidth value reaches 6.0 GHz at a thickness of 2.2 mm.Our research shows that different morphologies and multiple lattice structures of nanostructures with the same composition have a significant influence on EMW absorption performance,which provides new research ideas for developing high-performance EMW absorbing materials.
基金financial support from National Natural Science Foundation of China(No.:51971111)the National Research Foundation,Prime Minister’s Office,Singapore under its Campus for Research Excellence and Technological Enterprise(CREATE)program+2 种基金the Funding for Outstanding Doctoral Dissertation in NUAA(No.BCXJ17-07)Postgraduate Research&Practice Innovation of Jiangsu Province(KYCX17_0252)the Open Research Fund of Jiangsu Provincial Key Laboratory of Bionic Functional Materials。
文摘Developing a flexible,light-weight and effective electromagnetic(EM)absorber remains challenging despite being on increasing demand as more wearable devices and portable electronics are commercialized.Herein,we report a flexible and lightweight hybrid paper by a facile vacuumfiltration-induced self-assembly process,in which cotton-derived carbon fibers serve as flexible skeletons,compactly surrounded by other microwave-attenuating components(reduced graphene oxide and Fe3O4@C nanowires).Owing to its unique architecture and synergy of the three components,the asprepared hybrid paper exhibits flexible and lightweight features as well as superb microwave absorption performance.Maximum absorption intensity with reflection loss as low as-63 dB can be achieved,and its broadest frequency absorption bandwidth of 5.8 GHz almost covers the entire Ku band.Such a hybrid paper is promising to cope with ever-increasing EM interference.The work also paves the way to develop low-cost and flexible EM wave absorber from biomass through a facile method.
