】报道了多块 YBa Cu O高温超导体块材的不同组合方式在永磁轨道上的磁悬浮力的实验研究结果 ,实验研究证明不同的组合方式对其悬浮力的影响较大。作者分别研究了四块 YBa Cu O高温超导体块材以不同的组合方式在永磁轨道上的悬浮力 ,并...】报道了多块 YBa Cu O高温超导体块材的不同组合方式在永磁轨道上的磁悬浮力的实验研究结果 ,实验研究证明不同的组合方式对其悬浮力的影响较大。作者分别研究了四块 YBa Cu O高温超导体块材以不同的组合方式在永磁轨道上的悬浮力 ,并进行了分析比较 。展开更多
The super-high speed high temperature superconductor （HTS） maglev evacuated tube transport （ETT） is a promising transport mode for the future. As a key component of the HTS maglev vehicle, the permanent magnet gui...The super-high speed high temperature superconductor （HTS） maglev evacuated tube transport （ETT） is a promising transport mode for the future. As a key component of the HTS maglev vehicle, the permanent magnet guide- ways （PMGs） with different geometrical configurations and iron yoke widths are analyzed by finite element method （FEM）. The levitation force of a single onboard HTS maglev device over the designed PMG at different field cooling heights （FCH） is measured by magnetic levitation measurement system. Based on the designed PMG and experimental results, a preliminary scheme of subterranean super-high speed HTS maglev ETT is described in this paper. The HTS maglev ETT is mainly composed of an evacuated tube, HTS maglev vehicle, PMG, propulsion system, station, emergency rescue system, etc. In addition, a subterranean tube that consists of foundation tube and vacuum airproof layer is introduced. In order to convert the stress caused by the air pressure difference between inside and outside of the vehicle, a multi-circular vehicle body is designed. The vehicle is driven by a linear motor propulsion system under the control of a ground controlling system. The scheme of long-distance super-high speed passenger transportation is accomplished by the connection of different vehicles.展开更多
基金support from the PCSIRT of the Ministry of Education of China(IRT0751)the National Natural Science Foundation of China (Grant Nos. 50588201, and 50872116)+3 种基金the National High Technology Research and Development Program of China (863 program: 2007AA03Z203)the Research Fund for the Doctoral Program of Higher Education of China (SRFDP200806130023)the Fundamental Research Funds for the Central Universities(SWJTU09BR152 and SWJTU09ZT24)the Doctoral Innovation Foundation of Southwest Jiaotong University (X1899124710003)
文摘The super-high speed high temperature superconductor （HTS） maglev evacuated tube transport （ETT） is a promising transport mode for the future. As a key component of the HTS maglev vehicle, the permanent magnet guide- ways （PMGs） with different geometrical configurations and iron yoke widths are analyzed by finite element method （FEM）. The levitation force of a single onboard HTS maglev device over the designed PMG at different field cooling heights （FCH） is measured by magnetic levitation measurement system. Based on the designed PMG and experimental results, a preliminary scheme of subterranean super-high speed HTS maglev ETT is described in this paper. The HTS maglev ETT is mainly composed of an evacuated tube, HTS maglev vehicle, PMG, propulsion system, station, emergency rescue system, etc. In addition, a subterranean tube that consists of foundation tube and vacuum airproof layer is introduced. In order to convert the stress caused by the air pressure difference between inside and outside of the vehicle, a multi-circular vehicle body is designed. The vehicle is driven by a linear motor propulsion system under the control of a ground controlling system. The scheme of long-distance super-high speed passenger transportation is accomplished by the connection of different vehicles.
