In cone-beam computed tomography （CBCT）, there are often cases where the size of the specimen is larger than the field of view （FOV） （referred to as over FOV-sized （OFS））. To acquire the complete projection da...In cone-beam computed tomography （CBCT）, there are often cases where the size of the specimen is larger than the field of view （FOV） （referred to as over FOV-sized （OFS））. To acquire the complete projection data for OFS objects, some scan modes have been developed for long objects and short but over-wide objects. However, these modes still cannot meet the requirements for both longitudinally long and transversely wide objects. In this paper, we propose a multiple helical scan mode and a corresponding reconstruction algorithm for both longitudinally long and transversely wide objects. The simulation results show that our model can deal with the problem and that the results are acceptable, while the OFS object is twice as long compared with the FOV in the same latitude.展开更多
The simplification of 3D laser scanning point cloud is an important step of surface reconstruction and volume estimation of bulk grain in granary.This study presented an adaptive simplification algorithm based on part...The simplification of 3D laser scanning point cloud is an important step of surface reconstruction and volume estimation of bulk grain in granary.This study presented an adaptive simplification algorithm based on particle swarm optimization(PSO).It introduced PSO into the average distance method,a conventional simplification method.The basic idea of this algorithm was to adaptively determine the optimal point reducing intervals of scanning lines according to original point cloud density by PSO.By using the 3D point cloud scanned from bulk grain surface in granary,the proposed algorithm was validated.Compared with the average distance method,the proposed algorithm obtained more evenly distributed point set,smaller reduction ratio(6.96%)and higher volume estimation accuracy(relative error was less than 3‰).The 3D laser scanner(GSLS003,Jilin University and SkyViTech Co.,Ltd.,Hangzhou,China)used in this study could scan the complete picture of the grain surface in a granary in one time,so the acquired point cloud data do not have to be jointed.For the good simplification performance and capability of updating the reducing interval at any moment,the proposed algorithm and the 3D laser scanner could be used to realize online real-time measurement of stored bulk grain volume in granary.展开更多
Ⅰ. THE SCIENTIFIC BACKGROUND AND SIGNIFICANCE Abundant physical information about remote celestial bodies is contained in their optical spectra. The optical spectra of enormous amount of celestial bodies are critical...Ⅰ. THE SCIENTIFIC BACKGROUND AND SIGNIFICANCE Abundant physical information about remote celestial bodies is contained in their optical spectra. The optical spectra of enormous amount of celestial bodies are critical in astronomical research of wide field of view and large samples that concerns various frontiers in astronomy and astrophysics. Up to now, however, among the tens of billions of all kinds of celestial bodies recorded by imaging surveys, only a very little part (about one ten thousandth)展开更多
Contactless manipulation of multi-scale objects using the acoustic vortex(AV) tweezers offers tremendous perspectives in biomedical applications.However,it is still hindered by the weak acoustic radiation force(ARF) a...Contactless manipulation of multi-scale objects using the acoustic vortex(AV) tweezers offers tremendous perspectives in biomedical applications.However,it is still hindered by the weak acoustic radiation force(ARF) and torque(ART)around the vortex center.By introducing the elevation angle to the planar transducers of an N-element ring array,the weakfocused acoustic vortex(WFAV) composed of a main-AV and N paraxial-AVs is constructed to conduct a large-scale object manipulation.Different from the traditional focused AV(FAV) generated by a ring array of concave spherical transducers,a much larger focal region of the WFAV is generated by the main lobes of the planar transducers with the size inversely associated with the elevation angle.With the pressure simulation of the acoustic field,the capability of the rotational object driving in the focal plane for the WFAV is analyzed using the ARF and the ART exerted on an elastic ball based on acoustic scattering.With the experimental system built in water,the generation of the WFAV is verified by the scanning measurements of the acoustic field and the capability of object manipulation is also analyzed by the rotational trapping of floating particles in the focal plane.The favorable results demonstrate the feasibility of large-scale rotational manipulation of objects with a strengthened ART and a reduced acousto-thermal damage to biological tissues,showing a promising prospect for potential applications in clinical practice.展开更多
基金Project supported by the National Basic Research Program of China (Grant No. 2011CB707701)the National High Technology Research and Development Program of China (Grant No. 2009AA012200)the National Nature Science Foundation of China(Grant No. 30970722)
文摘In cone-beam computed tomography （CBCT）, there are often cases where the size of the specimen is larger than the field of view （FOV） （referred to as over FOV-sized （OFS））. To acquire the complete projection data for OFS objects, some scan modes have been developed for long objects and short but over-wide objects. However, these modes still cannot meet the requirements for both longitudinally long and transversely wide objects. In this paper, we propose a multiple helical scan mode and a corresponding reconstruction algorithm for both longitudinally long and transversely wide objects. The simulation results show that our model can deal with the problem and that the results are acceptable, while the OFS object is twice as long compared with the FOV in the same latitude.
基金This work was financially supported by National Natural Science Foundation of China(No.50975121)Jilin Province Science and Technology Development Plan Item(No.20130522150JH)2013 Jilin Province Science Foundation for Post Doctorate Research(No.RB201361).
文摘The simplification of 3D laser scanning point cloud is an important step of surface reconstruction and volume estimation of bulk grain in granary.This study presented an adaptive simplification algorithm based on particle swarm optimization(PSO).It introduced PSO into the average distance method,a conventional simplification method.The basic idea of this algorithm was to adaptively determine the optimal point reducing intervals of scanning lines according to original point cloud density by PSO.By using the 3D point cloud scanned from bulk grain surface in granary,the proposed algorithm was validated.Compared with the average distance method,the proposed algorithm obtained more evenly distributed point set,smaller reduction ratio(6.96%)and higher volume estimation accuracy(relative error was less than 3‰).The 3D laser scanner(GSLS003,Jilin University and SkyViTech Co.,Ltd.,Hangzhou,China)used in this study could scan the complete picture of the grain surface in a granary in one time,so the acquired point cloud data do not have to be jointed.For the good simplification performance and capability of updating the reducing interval at any moment,the proposed algorithm and the 3D laser scanner could be used to realize online real-time measurement of stored bulk grain volume in granary.
文摘Ⅰ. THE SCIENTIFIC BACKGROUND AND SIGNIFICANCE Abundant physical information about remote celestial bodies is contained in their optical spectra. The optical spectra of enormous amount of celestial bodies are critical in astronomical research of wide field of view and large samples that concerns various frontiers in astronomy and astrophysics. Up to now, however, among the tens of billions of all kinds of celestial bodies recorded by imaging surveys, only a very little part (about one ten thousandth)
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11934009,11974187,and 12004187)the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20161013 and BK20200724)。
文摘Contactless manipulation of multi-scale objects using the acoustic vortex(AV) tweezers offers tremendous perspectives in biomedical applications.However,it is still hindered by the weak acoustic radiation force(ARF) and torque(ART)around the vortex center.By introducing the elevation angle to the planar transducers of an N-element ring array,the weakfocused acoustic vortex(WFAV) composed of a main-AV and N paraxial-AVs is constructed to conduct a large-scale object manipulation.Different from the traditional focused AV(FAV) generated by a ring array of concave spherical transducers,a much larger focal region of the WFAV is generated by the main lobes of the planar transducers with the size inversely associated with the elevation angle.With the pressure simulation of the acoustic field,the capability of the rotational object driving in the focal plane for the WFAV is analyzed using the ARF and the ART exerted on an elastic ball based on acoustic scattering.With the experimental system built in water,the generation of the WFAV is verified by the scanning measurements of the acoustic field and the capability of object manipulation is also analyzed by the rotational trapping of floating particles in the focal plane.The favorable results demonstrate the feasibility of large-scale rotational manipulation of objects with a strengthened ART and a reduced acousto-thermal damage to biological tissues,showing a promising prospect for potential applications in clinical practice.
