Rechargeable aqueous zinc-iodine batteries have received extensive attention due to their inherent advantages such as low cost,flame retardancy and safety.To address the safety concern associated with Zn dendrites,tin...Rechargeable aqueous zinc-iodine batteries have received extensive attention due to their inherent advantages such as low cost,flame retardancy and safety.To address the safety concern associated with Zn dendrites,tin functional layer is introduced to the Zn surface via a spontaneous galvanic replacement reaction.This provides rapid deposition kinetics,thereby achieving the uniform Zn plating/stripping with a low overpotential(13.9 mV)and good stability for over 900 h.Importantly,the coupling of the advanced Zn anode with iodine in Zn-I_(2)battery exhibits a high specific capacity of 196.4 mAh·g^(−1)with high capacity retention(90.7%).This work provides a reliable strategy to regulate the reversible redox of zinc for advanced rechargeable batteries.展开更多
Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal batteries.Herein,a novel modified lithium anode with reduced ...Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal batteries.Herein,a novel modified lithium anode with reduced graphene oxide conductive network containing trace lithiophilic phosphorus(P-rGO/Cu)is prepared by electrospraying technique combined with heat treatment process.The rGO layer has a concave and undulating conductive structure,which can significantly improve the effective electrical contact between lithium metal and the current collector,speed up the kinetics of interfacial electron transport and reaction,and improve the resistance of the negative electrode to the internal stress caused by volume change of the lithium,which is advantageous for the stability of the SEI film.The extremely small and uniformly distributed red phosphorus element avoids the volume change caused by lithiation to the maximum extent.Lithiophilic two-phase compound Li_(3)P obtained by alloying P with Li can directionally induce the homogeneous nucleation and dense deposition of lithium metal,address the issue of lithium dendrites and extend the cycle life of the batteries.The obtained P-rGO/Cu exhibits excellent electrochemical performance with an average Coulombic efficiency(CE)of 98%at a current density of 1 mA·cm^(−2) for 400 cycles,and the capacity retention rate of the full cell matched with lithium iron phosphate(LFP)is 83%after 400 cycles at 1C.展开更多
MnO_(2)has attracted great interest in working as the cathode of zinc ion batteries.However,the development of high-capacity,high-energy-density,and durable manganese-based cathodes with an easy synthesis strategy and...MnO_(2)has attracted great interest in working as the cathode of zinc ion batteries.However,the development of high-capacity,high-energy-density,and durable manganese-based cathodes with an easy synthesis strategy and proper energy storage mechanism remains an ongoing challenge.Herein,a facile plasmainduced strategy was demonstrated to introduce oxygen vacancies into theε-MnO_(2),and the obtained oxygen vacancies-richε-MnO_(2)nanosheets(ε-MnO_(2-x))show satisfactory electrochemical performances.Furthermore,an appropriate energy storage mechanism for dissolution/deposition was proposed.Thanks to a synergistic effect of the oxygen vacancies inε-MnO_(2)nanosheets and the exposed free-standing collector for Mn^(2+) dissolution/deposition,theε-MnO_(2-x) nanosheets electrode delivers a remarkable capacity(337 mAh g^(-1)at 0.1 A g^(-1))and exhibits an ultrahigh energy density of 462 Wh kg^(-1)(based on the weights of the cathode active material).Furthermore,impressive durability with 85.9%capacity retention after 1000 cycles was obtained.The superior electrochemical performance makes the plasma-induced strategy promising for designing advanced metal oxide electrode materials for high-performance aqueous zinc ion batteries.展开更多
Because of their physiological similarity to humans, pigs provide an excellent model for the study of obesity. This study evaluated diet-induced adiposity in genetically lean pigs and found that body weight and energy...Because of their physiological similarity to humans, pigs provide an excellent model for the study of obesity. This study evaluated diet-induced adiposity in genetically lean pigs and found that body weight and energy intake did not differ between controls and pigs fed the high-fat （HF） diet for three months. However, fat mass percentage, adi- pocyte size, concentrations of total cholesterol （TC）, triglyceride （TG）, high-density lipoprotein cholesterol （HDL-C） and low-density lipoprotein cholesterol （LDL-C）, insulin, and leptin in plasma were significantly higher in HF pigs than in controls. The HF diet increased the expression in backfat tissue of genes responsible for cholesterol synthesis such as Insig-1 and Insig-2. Lipid metabolism-related genes including sterol regulatory element binding protein lc （SREBP-lc）, fatty acid synthase 1 （FASN1）, diacylglycerol O-acyltransferase 2 （DGAT2）, and fatty acid binding protein 4 （FABP4） were significantly up-regulated in backfat tissue, while the expression of proliferator-activated receptor-α（PPAR-α） and carnitine palmitoyl transferase 2 （CPT2）, both involved in fatty acid oxidation, was reduced. In liver tissue, HF feeding significantly elevated the expression of SREBP-lc, FASN1, DGAT2, and hepatocyte nuclear factor-4α （HNF-4α） mRNAs. Microarray analysis further showed that the HF diet had a significant effect on the expression of 576 genes. Among these, 108 genes were related to 21 pathways, with 20 genes involved in adiposity deposition and 26 related to immune response. Our results suggest that an HF diet can induce genetically lean pigs into obesity with body fat mass expansion and adipose-related inflammation.展开更多
Plasma-enhanced atomic layer deposition (PEALD) is gaining interest in thin films for laser applications, and post-annealing treatments are often used to improve thin film properties. However, research to improve thin...Plasma-enhanced atomic layer deposition (PEALD) is gaining interest in thin films for laser applications, and post-annealing treatments are often used to improve thin film properties. However, research to improve thin film properties is often based on an expensive and time-consuming trial-and-error process. In this study, PEALD-HfO2 thin film samples were deposited and treated under different annealing atmospheres and temperatures. The samples were characterized in terms of their refractive indices, layer thicknesses and O/Hf ratios. The collected data were split into training and validation sets and fed to multiple back-propagation neural networks with different hidden layers to determine the best way to construct the process–performance relationship. The results showed that the three-hidden-layer back-propagation neural network (THL-BPNN) achieved stable and accurate fitting. For the refractive index, layer thickness and O/Hf ratio, the THL-BPNN model achieved accuracy values of 0.99, 0.94 and 0.94, respectively, on the training set and 0.99, 0.91 and 0.90, respectively, on the validation set. The THL-BPNN model was further used to predict the laser-induced damage threshold of PEALD-HfO2 thin films and the properties of the PEALD-SiO2 thin films, both showing high accuracy. This study not only provides quantitative guidance for the improvement of thin film properties but also proposes a general model that can be applied to predict the properties of different types of laser thin films, saving experimental costs for process optimization.展开更多
In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic ...In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic electrode exhibits no template requirement,freedom design,low-cost,robust,anticorrosion,lightweight,and micro-nano porous characteristics.It can be drawn to the conclusion that highly oriented open-porous 3D geometry structure will be beneficial for improving surface catalytic active area,wetting performance,and reaction–diffusion dynamics of plastic electrodes for oxygen evolution reaction(OER)catalysis process.Density functional theory(DFT)calculation interprets the origin of high activity of NiFe(PO_(3))O(OH)and demonstrates that the implantation of the–PO_(3)can effectively bind the 3d orbital of Ni in NiFe(PO_(3))O(OH),lead to the weak adsorption of intermediate,make electron more active to improve the conductivity,thereby lowing the transform free energy of*O to*OOH.The water oxidization performance of as-prepared 3D NiFe(PO_(3))O(OH)hollow tubular(HT)lattice plastic electrode has almost reached the state-of-the-art level compared with the as-reported large-current-density catalysts or 3D additive manufactured plastic/metal-based electrodes,especially for high current OER electrodes.This work breaks through the bottleneck that plagues the performance improvement of low-cost high-current electrodes.展开更多
Working with a biased atomic force microscope(AFM)tip in the tapping mode under ambient atmosphere,attoliter(10^(-18) L)water droplet patterns have been generated on a patterned carbonaceous surface.This is essentiall...Working with a biased atomic force microscope(AFM)tip in the tapping mode under ambient atmosphere,attoliter(10^(-18) L)water droplet patterns have been generated on a patterned carbonaceous surface.This is essentially electrocondensation of water leading to charged droplets,as evidenced from electrostatic force microscopy measurements.The droplets are unusual in that they exhibit a highly corrugated surface and evaporate rather slowly,taking several tens of minutes.展开更多
As new-generation solar cells,quantum dot-sensitized solar cells(QDSCs)have the outstanding advantages of low cost and high theoretical efficiency;thus,such cells receive extensive research attention.Their power conve...As new-generation solar cells,quantum dot-sensitized solar cells(QDSCs)have the outstanding advantages of low cost and high theoretical efficiency;thus,such cells receive extensive research attention.Their power conversion efficiency(PCE)has increased from 5%to over 15%in the past decade.However,compared with the theoretical efficiency(44%),the PCE of QDSCs still needs further improvement.The low loading amount of quantum dots(QDs)is a key factor limiting the improvement of cell efficiency.The loading amount of QDs on the surface of the substrate film is important for the performance of QDSCs,which directly affects the light-harvesting ability of the device and interfacial charge recombination.The optimization of QD deposition and the improvement of the loading amount are important driving forces for the rapid development of QDSCs in recent years and a key breakthrough in future development.In this paper,the research progress of QD deposition on the surface of substrate films in QDSCs was reviewed.In addition,the main deposition methods and their advantages and disadvantages were discussed,and future research on the further increase in loading amount was proposed.展开更多
Zinc-based flow batteries(ZFBs)have aroused great favor in large-scale energy storage due to the high security and low cost.However,the low areal capacity arising from the limited space for Zn plating hinders the furt...Zinc-based flow batteries(ZFBs)have aroused great favor in large-scale energy storage due to the high security and low cost.However,the low areal capacity arising from the limited space for Zn plating hinders the further development.Herein,a novel carbon felt-Sn-carbon felt sandwich host(CSCH)is designed and constructed.Benefiting from the strong chemical absorption and the dehydration effect on Zn(H_(2)O)_(6)^(2+),the Sn activation layer in the CSCH demonstrates the lowest comprehensive resistance for Zn deposition.Thus,Zn is induced to nucleate preferentially on the Sn activation layer,and grows towards the membrane,regulating the spatial distribution of Zn electrochemical deposits,which remarkably improves the areal capacity and cyclic stability of Zn anode.Consequently,the zinc-bromine flow batteries equipped with CSCH electrodes can achieve the ultra-high areal capacity of 120 mA h cm^(-2)at 80 mA cm^(-2),and run stably for 140 h with average energy efficiency of 80.3%in the extreme condition(80 mA cm^(-2),80 mA h cm^(-2)).This innovative work will inspire future advanced designs for high areal capacity electrodes in ZFBs.展开更多
Co deposition of Ho with Co was studied in dimethylsulfoxide (DMSO) by cyclic voltammetry and potentiostatic deposition at room temperature. The cyclic voltammogram shows that the codeposition of Ho with Co can be at...Co deposition of Ho with Co was studied in dimethylsulfoxide (DMSO) by cyclic voltammetry and potentiostatic deposition at room temperature. The cyclic voltammogram shows that the codeposition of Ho with Co can be attributed to induced codeposition mechanism, for the codeposition potential is more negative than the deposition potential of Co but positive than that of Ho. For the potentiostatic deposition used in Ho Co alloys preparation, the results indicate that in the range of selected concentration the potential is the main factor determining the content of Ho in Ho Co alloys, while the composition of Ho 3+ and Co 2+ in electrolyte solution has less influence. According to the analysis of X ray diffraction, EDAX, and scanning electron microscopy, uniform, compact and amorphous films on Cu can be obtained at -1 8 V (vs.SCE) in 0 165 mol·L -1 Ho(NO 3) -0 135 mol·L -1 CoCl 2 DMSO solution.展开更多
Flame retardants play a crucial role in improving theflame retardant properties of polymer materials.In recent years,environmental problems caused byflame retar-dants have attracted widespread attention.It is urgent to ...Flame retardants play a crucial role in improving theflame retardant properties of polymer materials.In recent years,environmental problems caused byflame retar-dants have attracted widespread attention.It is urgent to use green and effective methods to prepareflame retardant polymers.Bioinspired nanocomposites with lay-ered structures seem to provide effective ideas,but in general,their hydrophilic raw materials limit their applications in certainfields.Here,we prepared biomimetic composites with a layered“brick-and-mortar”structure by gravity-induced depo-sition using polyimide as the polymer matrix and montmorillonite(MMT)as thefiller.The well-arranged structures of the composite material could isolate oxygen and prevent combustible gases from escaping.The gas barrier performance has been greatly improved,in which the water vapor transmission rate and the oxygen trans-mission rate decreased by 99.18%and three orders of magnitude,respectively.Theflame retardant performance has also been improved,and its limiting oxygen index can reach 67.9%.The polyimide matrix can be converted to water-insoluble by ther-mal imidization of water-soluble poly(amic acid)salt precursors,which endows the composites with low hygroscopicity.The coating containing MMT can protect against polyurethane(PU)foam fromfire.During the conical calorimetric test,the coated sample self-extinguished,and the peak heat release rate,total heat release,and total smoke production are significantly decreased by 53.39%,40.69%,and 53.03%,respectively.Taking advantage of these properties,this work utilizes a facile method to prepare biomimetic composites with low moisture absorption,excellent gas barrier properties,andflame retardancy,which have great application potential.展开更多
The cathode of lithium-oxygen(Li-O_(2))batteries should have large space for high Li_(2)O_(2) uptake and superior electrocatalytic activity to oxygen evolution/reduction for long lifespan.Herein,a high-performance MnO...The cathode of lithium-oxygen(Li-O_(2))batteries should have large space for high Li_(2)O_(2) uptake and superior electrocatalytic activity to oxygen evolution/reduction for long lifespan.Herein,a high-performance MnO_(x)/hCNC cathode was constructed by the defect-induced deposition of manganese oxide(MnOx)nanoparticles on hierarchical carbon nanocages(hCNC).The corresponding Li-O2 battery(MnOx/hCNC@Li-O_(2))exhibited excellent electrocatalytic activity with the low overpotential of 0.73-0.99 V in the current density range of 0.1-1.0 A·g^(-1).The full discharge capacity and cycling life of MnO_(x)/hCNC@Li-O_(2) were increased by~86.7%and~91%,respectively,compared with the hCNC@Li-O_(2) counterpart.The superior performance of MnO_(x)/hCNC cathode was ascribed to(i)the highly dispersed MnO_(x) nanoparticles for boosting the reversibility of oxygen evolution/reduction reactions,(ii)the interconnecting pore structure for increasing Li_(2)O_(2) accommodation and facilitating charge/mass transfer,and(iii)the concealed surface defects of hCNC for suppressing side reactions.This study demonstrated an effective strategy to improve the performance of Li-O_(2) batteries by constructing cathodes with highly dispersed catalytic sites and hierarchical porous structure.展开更多
The diffusion barrier Ni-Mo-P film for Cu interconnects was prepared on SiO2/Si substrate using electroless method. The surface morphology and composition during the formation process of electroless Ni-Mo-P film were ...The diffusion barrier Ni-Mo-P film for Cu interconnects was prepared on SiO2/Si substrate using electroless method. The surface morphology and composition during the formation process of electroless Ni-Mo-P film were investigated through analyzing samples of different deposition time. Induced nucleation, induced co-deposition, and self-induced growth mechanisms involved in electroless process were confirmed by field-emission scanning electron microscopy （FE-SEM）, energy dispersive spectrometry and atomic force microscopy （AFM）. Firstly, the preceding palladium particles as catalysts induce the nucleation of nickel. Secondly, the nickel particles induce the deposition of molybdenum and phosphorus, which attributes to induced co-deposition. Thirdly, former deposited Ni-Mo-P induces deposition of the latter Ni-Mo-P particles. Moreover, the reaction mechanism was proposed with the oxydate of 3-4PO .展开更多
An optical transmission method was used in-situ to measure the rate of pyrolytic deposition from Mn_2(CO)_(10) induced by a CW CO_2 laser. The effect of the laser intensity, Mn_2(CO)_(10) vapor pressure and added gase...An optical transmission method was used in-situ to measure the rate of pyrolytic deposition from Mn_2(CO)_(10) induced by a CW CO_2 laser. The effect of the laser intensity, Mn_2(CO)_(10) vapor pressure and added gases (CO, O_2 and Ar) on the deposition rate has been examined.展开更多
基金supported by the National Natural Science Foundation of China(No.22175108)the Natural Scientific Foundation of Shandong Province(No.ZR2020JQ09)+1 种基金Taishan Scholars Program of Shandong Province(No.tsqn20161004)the Program for Scientific Research Innovation Team of Young Scholar in Colleges and Universities of Shandong Province(No.2019KJC025).
文摘Rechargeable aqueous zinc-iodine batteries have received extensive attention due to their inherent advantages such as low cost,flame retardancy and safety.To address the safety concern associated with Zn dendrites,tin functional layer is introduced to the Zn surface via a spontaneous galvanic replacement reaction.This provides rapid deposition kinetics,thereby achieving the uniform Zn plating/stripping with a low overpotential(13.9 mV)and good stability for over 900 h.Importantly,the coupling of the advanced Zn anode with iodine in Zn-I_(2)battery exhibits a high specific capacity of 196.4 mAh·g^(−1)with high capacity retention(90.7%).This work provides a reliable strategy to regulate the reversible redox of zinc for advanced rechargeable batteries.
基金This study was financially supported by the Key-Area Research and Development Program of Guangdong Province(No.2020B090919003)the National Natural Science Foundation of China(Nos.52261160384,51872157 and 52072208)+2 种基金the Fundamental Research Project of Shenzhen(No.JCYJ20190808153609561)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(No.2017BT01N111)the Support Plan for Shenzhen Manufacturing Innovation Center(No.20200627215553988).
文摘Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal batteries.Herein,a novel modified lithium anode with reduced graphene oxide conductive network containing trace lithiophilic phosphorus(P-rGO/Cu)is prepared by electrospraying technique combined with heat treatment process.The rGO layer has a concave and undulating conductive structure,which can significantly improve the effective electrical contact between lithium metal and the current collector,speed up the kinetics of interfacial electron transport and reaction,and improve the resistance of the negative electrode to the internal stress caused by volume change of the lithium,which is advantageous for the stability of the SEI film.The extremely small and uniformly distributed red phosphorus element avoids the volume change caused by lithiation to the maximum extent.Lithiophilic two-phase compound Li_(3)P obtained by alloying P with Li can directionally induce the homogeneous nucleation and dense deposition of lithium metal,address the issue of lithium dendrites and extend the cycle life of the batteries.The obtained P-rGO/Cu exhibits excellent electrochemical performance with an average Coulombic efficiency(CE)of 98%at a current density of 1 mA·cm^(−2) for 400 cycles,and the capacity retention rate of the full cell matched with lithium iron phosphate(LFP)is 83%after 400 cycles at 1C.
基金NSFC(Nos.51702123,51472110)the Shandong Province Higher Educational Youths Innovation Science and Technology Program(No.2019KJA018)the University of Jinan Science and Technology Planning Project(No.XKY2034)。
文摘MnO_(2)has attracted great interest in working as the cathode of zinc ion batteries.However,the development of high-capacity,high-energy-density,and durable manganese-based cathodes with an easy synthesis strategy and proper energy storage mechanism remains an ongoing challenge.Herein,a facile plasmainduced strategy was demonstrated to introduce oxygen vacancies into theε-MnO_(2),and the obtained oxygen vacancies-richε-MnO_(2)nanosheets(ε-MnO_(2-x))show satisfactory electrochemical performances.Furthermore,an appropriate energy storage mechanism for dissolution/deposition was proposed.Thanks to a synergistic effect of the oxygen vacancies inε-MnO_(2)nanosheets and the exposed free-standing collector for Mn^(2+) dissolution/deposition,theε-MnO_(2-x) nanosheets electrode delivers a remarkable capacity(337 mAh g^(-1)at 0.1 A g^(-1))and exhibits an ultrahigh energy density of 462 Wh kg^(-1)(based on the weights of the cathode active material).Furthermore,impressive durability with 85.9%capacity retention after 1000 cycles was obtained.The superior electrochemical performance makes the plasma-induced strategy promising for designing advanced metal oxide electrode materials for high-performance aqueous zinc ion batteries.
基金Project supported by the National Key Research and Development Program of China(Nos.2018YFD0500400 and 2018YFD0501100)the National Basic Research Program(973)of China(No.2013CB127304)+1 种基金the China Agriculture Research System(No.CARS-36)and the National Natural Science Foundation of China(No.31402086)
文摘Because of their physiological similarity to humans, pigs provide an excellent model for the study of obesity. This study evaluated diet-induced adiposity in genetically lean pigs and found that body weight and energy intake did not differ between controls and pigs fed the high-fat （HF） diet for three months. However, fat mass percentage, adi- pocyte size, concentrations of total cholesterol （TC）, triglyceride （TG）, high-density lipoprotein cholesterol （HDL-C） and low-density lipoprotein cholesterol （LDL-C）, insulin, and leptin in plasma were significantly higher in HF pigs than in controls. The HF diet increased the expression in backfat tissue of genes responsible for cholesterol synthesis such as Insig-1 and Insig-2. Lipid metabolism-related genes including sterol regulatory element binding protein lc （SREBP-lc）, fatty acid synthase 1 （FASN1）, diacylglycerol O-acyltransferase 2 （DGAT2）, and fatty acid binding protein 4 （FABP4） were significantly up-regulated in backfat tissue, while the expression of proliferator-activated receptor-α（PPAR-α） and carnitine palmitoyl transferase 2 （CPT2）, both involved in fatty acid oxidation, was reduced. In liver tissue, HF feeding significantly elevated the expression of SREBP-lc, FASN1, DGAT2, and hepatocyte nuclear factor-4α （HNF-4α） mRNAs. Microarray analysis further showed that the HF diet had a significant effect on the expression of 576 genes. Among these, 108 genes were related to 21 pathways, with 20 genes involved in adiposity deposition and 26 related to immune response. Our results suggest that an HF diet can induce genetically lean pigs into obesity with body fat mass expansion and adipose-related inflammation.
基金This work was supported by the Program of Shanghai Academic Research Leader(No.23XD1424100)the CAS Project for Young Scientists in Basic Research(No.YSBR-081)+1 种基金the National Natural Science Foundation of China(No.61975215)the Science and Technology Planning Project of the Shanghai Municipal Science&Technology Commission(No.21DZ1100400).
文摘Plasma-enhanced atomic layer deposition (PEALD) is gaining interest in thin films for laser applications, and post-annealing treatments are often used to improve thin film properties. However, research to improve thin film properties is often based on an expensive and time-consuming trial-and-error process. In this study, PEALD-HfO2 thin film samples were deposited and treated under different annealing atmospheres and temperatures. The samples were characterized in terms of their refractive indices, layer thicknesses and O/Hf ratios. The collected data were split into training and validation sets and fed to multiple back-propagation neural networks with different hidden layers to determine the best way to construct the process–performance relationship. The results showed that the three-hidden-layer back-propagation neural network (THL-BPNN) achieved stable and accurate fitting. For the refractive index, layer thickness and O/Hf ratio, the THL-BPNN model achieved accuracy values of 0.99, 0.94 and 0.94, respectively, on the training set and 0.99, 0.91 and 0.90, respectively, on the validation set. The THL-BPNN model was further used to predict the laser-induced damage threshold of PEALD-HfO2 thin films and the properties of the PEALD-SiO2 thin films, both showing high accuracy. This study not only provides quantitative guidance for the improvement of thin film properties but also proposes a general model that can be applied to predict the properties of different types of laser thin films, saving experimental costs for process optimization.
基金the National Natural Science Foundation of China(52001173&52100190)the Jiangsu Specially-Appointed Professor Program,Natural Science Foundation of Jiangsu Province(BK20200970&BK20210834)+2 种基金General Project of Natural Science Research in Jiangsu Colleges and Universities(20KJB530011&20KJB430046)Research Fund of Nantong University(03083054)National College Students'innovation and entrepreneurship training program(202110304019Z)for financial support.
文摘In this article,we report a 3D NiFe phosphite oxyhydroxide plastic electrode using high-resolution digital light processing(DLP)3D-printing technology via induced chemical deposition method.The as-prepared 3D plastic electrode exhibits no template requirement,freedom design,low-cost,robust,anticorrosion,lightweight,and micro-nano porous characteristics.It can be drawn to the conclusion that highly oriented open-porous 3D geometry structure will be beneficial for improving surface catalytic active area,wetting performance,and reaction–diffusion dynamics of plastic electrodes for oxygen evolution reaction(OER)catalysis process.Density functional theory(DFT)calculation interprets the origin of high activity of NiFe(PO_(3))O(OH)and demonstrates that the implantation of the–PO_(3)can effectively bind the 3d orbital of Ni in NiFe(PO_(3))O(OH),lead to the weak adsorption of intermediate,make electron more active to improve the conductivity,thereby lowing the transform free energy of*O to*OOH.The water oxidization performance of as-prepared 3D NiFe(PO_(3))O(OH)hollow tubular(HT)lattice plastic electrode has almost reached the state-of-the-art level compared with the as-reported large-current-density catalysts or 3D additive manufactured plastic/metal-based electrodes,especially for high current OER electrodes.This work breaks through the bottleneck that plagues the performance improvement of low-cost high-current electrodes.
基金The authors thank Professor C.N.R.Rao,Fellow of Royal Society(FRS)for his encouragement.Support from the Department of Science and Technology,Government of India is gratefully acknowledged.N.K.acknowledges Council of Scientific and Industrial Research(CSIR)for funding.N.K.acknowledges Ritu for reading the manuscript.The authors thank Veeco India Nano-technology Laboratory at Jawaharlal Nehru Centre for Advanced Scientific Research(JNCASR)for the AFM facility.A.S.acknowledges INDO-US Science&Technology Forum(IUSSTF)for funding.
文摘Working with a biased atomic force microscope(AFM)tip in the tapping mode under ambient atmosphere,attoliter(10^(-18) L)water droplet patterns have been generated on a patterned carbonaceous surface.This is essentially electrocondensation of water leading to charged droplets,as evidenced from electrostatic force microscopy measurements.The droplets are unusual in that they exhibit a highly corrugated surface and evaporate rather slowly,taking several tens of minutes.
基金financial support by the Laboratory of Lingnan Modern Agriculture Project(NZ2021030)the National Natural Science Foundation of China(Nos.22122805,U21A20310,51732004,22075090,and 21975083)。
文摘As new-generation solar cells,quantum dot-sensitized solar cells(QDSCs)have the outstanding advantages of low cost and high theoretical efficiency;thus,such cells receive extensive research attention.Their power conversion efficiency(PCE)has increased from 5%to over 15%in the past decade.However,compared with the theoretical efficiency(44%),the PCE of QDSCs still needs further improvement.The low loading amount of quantum dots(QDs)is a key factor limiting the improvement of cell efficiency.The loading amount of QDs on the surface of the substrate film is important for the performance of QDSCs,which directly affects the light-harvesting ability of the device and interfacial charge recombination.The optimization of QD deposition and the improvement of the loading amount are important driving forces for the rapid development of QDSCs in recent years and a key breakthrough in future development.In this paper,the research progress of QD deposition on the surface of substrate films in QDSCs was reviewed.In addition,the main deposition methods and their advantages and disadvantages were discussed,and future research on the further increase in loading amount was proposed.
基金supported by the National Natural Science Foundation of China(22179019)the Natural Science Foundation of Hebei Province,China(B2020501003)the Fundamental Research Funds for the Central Universities(N2023030)。
文摘Zinc-based flow batteries(ZFBs)have aroused great favor in large-scale energy storage due to the high security and low cost.However,the low areal capacity arising from the limited space for Zn plating hinders the further development.Herein,a novel carbon felt-Sn-carbon felt sandwich host(CSCH)is designed and constructed.Benefiting from the strong chemical absorption and the dehydration effect on Zn(H_(2)O)_(6)^(2+),the Sn activation layer in the CSCH demonstrates the lowest comprehensive resistance for Zn deposition.Thus,Zn is induced to nucleate preferentially on the Sn activation layer,and grows towards the membrane,regulating the spatial distribution of Zn electrochemical deposits,which remarkably improves the areal capacity and cyclic stability of Zn anode.Consequently,the zinc-bromine flow batteries equipped with CSCH electrodes can achieve the ultra-high areal capacity of 120 mA h cm^(-2)at 80 mA cm^(-2),and run stably for 140 h with average energy efficiency of 80.3%in the extreme condition(80 mA cm^(-2),80 mA h cm^(-2)).This innovative work will inspire future advanced designs for high areal capacity electrodes in ZFBs.
基金Project supported by Natural Science Foundation of Guangdong Province (011215)
文摘Co deposition of Ho with Co was studied in dimethylsulfoxide (DMSO) by cyclic voltammetry and potentiostatic deposition at room temperature. The cyclic voltammogram shows that the codeposition of Ho with Co can be attributed to induced codeposition mechanism, for the codeposition potential is more negative than the deposition potential of Co but positive than that of Ho. For the potentiostatic deposition used in Ho Co alloys preparation, the results indicate that in the range of selected concentration the potential is the main factor determining the content of Ho in Ho Co alloys, while the composition of Ho 3+ and Co 2+ in electrolyte solution has less influence. According to the analysis of X ray diffraction, EDAX, and scanning electron microscopy, uniform, compact and amorphous films on Cu can be obtained at -1 8 V (vs.SCE) in 0 165 mol·L -1 Ho(NO 3) -0 135 mol·L -1 CoCl 2 DMSO solution.
基金Ministry of Science and Technology,Grant/Award Number:2022YFB3806601National Natural Science Foundation of China,Grant/Award Numbers:U20A20255,51873239,52103022,52203286+2 种基金Guangdong Provincial Department of Science and Technology,Grant/Award Numbers:2020B010182001,2020B010179001,2021A1515010664,2019B040401002Fellowship of China Postdoctoral Science Foundation,Grant/Award Number:2022M723572Guangxi Provincial Department of Science and Technology,Grant/Award Number:GLESI-KFKY2301013。
文摘Flame retardants play a crucial role in improving theflame retardant properties of polymer materials.In recent years,environmental problems caused byflame retar-dants have attracted widespread attention.It is urgent to use green and effective methods to prepareflame retardant polymers.Bioinspired nanocomposites with lay-ered structures seem to provide effective ideas,but in general,their hydrophilic raw materials limit their applications in certainfields.Here,we prepared biomimetic composites with a layered“brick-and-mortar”structure by gravity-induced depo-sition using polyimide as the polymer matrix and montmorillonite(MMT)as thefiller.The well-arranged structures of the composite material could isolate oxygen and prevent combustible gases from escaping.The gas barrier performance has been greatly improved,in which the water vapor transmission rate and the oxygen trans-mission rate decreased by 99.18%and three orders of magnitude,respectively.Theflame retardant performance has also been improved,and its limiting oxygen index can reach 67.9%.The polyimide matrix can be converted to water-insoluble by ther-mal imidization of water-soluble poly(amic acid)salt precursors,which endows the composites with low hygroscopicity.The coating containing MMT can protect against polyurethane(PU)foam fromfire.During the conical calorimetric test,the coated sample self-extinguished,and the peak heat release rate,total heat release,and total smoke production are significantly decreased by 53.39%,40.69%,and 53.03%,respectively.Taking advantage of these properties,this work utilizes a facile method to prepare biomimetic composites with low moisture absorption,excellent gas barrier properties,andflame retardancy,which have great application potential.
基金This work was jointly financed by the National Key Research and Development Program of China(Nos.2018YFA0209100 and 2017YFA0206500)the National Natural Science Foundation of China(NSFC)(Nos.21832003,21972061,and 21773111)the Fundamental Research Funds for the Central Universities(No.020514380237)。
文摘The cathode of lithium-oxygen(Li-O_(2))batteries should have large space for high Li_(2)O_(2) uptake and superior electrocatalytic activity to oxygen evolution/reduction for long lifespan.Herein,a high-performance MnO_(x)/hCNC cathode was constructed by the defect-induced deposition of manganese oxide(MnOx)nanoparticles on hierarchical carbon nanocages(hCNC).The corresponding Li-O2 battery(MnOx/hCNC@Li-O_(2))exhibited excellent electrocatalytic activity with the low overpotential of 0.73-0.99 V in the current density range of 0.1-1.0 A·g^(-1).The full discharge capacity and cycling life of MnO_(x)/hCNC@Li-O_(2) were increased by~86.7%and~91%,respectively,compared with the hCNC@Li-O_(2) counterpart.The superior performance of MnO_(x)/hCNC cathode was ascribed to(i)the highly dispersed MnO_(x) nanoparticles for boosting the reversibility of oxygen evolution/reduction reactions,(ii)the interconnecting pore structure for increasing Li_(2)O_(2) accommodation and facilitating charge/mass transfer,and(iii)the concealed surface defects of hCNC for suppressing side reactions.This study demonstrated an effective strategy to improve the performance of Li-O_(2) batteries by constructing cathodes with highly dispersed catalytic sites and hierarchical porous structure.
文摘The diffusion barrier Ni-Mo-P film for Cu interconnects was prepared on SiO2/Si substrate using electroless method. The surface morphology and composition during the formation process of electroless Ni-Mo-P film were investigated through analyzing samples of different deposition time. Induced nucleation, induced co-deposition, and self-induced growth mechanisms involved in electroless process were confirmed by field-emission scanning electron microscopy （FE-SEM）, energy dispersive spectrometry and atomic force microscopy （AFM）. Firstly, the preceding palladium particles as catalysts induce the nucleation of nickel. Secondly, the nickel particles induce the deposition of molybdenum and phosphorus, which attributes to induced co-deposition. Thirdly, former deposited Ni-Mo-P induces deposition of the latter Ni-Mo-P particles. Moreover, the reaction mechanism was proposed with the oxydate of 3-4PO .
文摘An optical transmission method was used in-situ to measure the rate of pyrolytic deposition from Mn_2(CO)_(10) induced by a CW CO_2 laser. The effect of the laser intensity, Mn_2(CO)_(10) vapor pressure and added gases (CO, O_2 and Ar) on the deposition rate has been examined.
