Geothermal energy is a precious resource,which is widely distributed,varied,and abundant.China has entered a period of rapid development of geothermal energy since 2010.As shallow geothermal energy promoting,the depth...Geothermal energy is a precious resource,which is widely distributed,varied,and abundant.China has entered a period of rapid development of geothermal energy since 2010.As shallow geothermal energy promoting,the depth of hydrothermal geothermal exploration is increasing.The quality of Hot Dry Rock (HDR)and related exploratory technologies are better developed and utilized.On the basis of geothermal development,this paper reviews the geothermal progress during the "12th Five-Year Plan",and summarizes the achievements of hydrothermal geothermal and hot dry rocks from geothermal survey and evaluation aspects.Finally,the authors predict the development trend of the future geothermal research to benefit geothermal and hot dry rock research.展开更多
The effects of the rare earth element yttrium(Y) and hot extrusion on the microstructure and mechanical properties of A356 alloy were investigated by mechanical properties testing and microstructure observation. The r...The effects of the rare earth element yttrium(Y) and hot extrusion on the microstructure and mechanical properties of A356 alloy were investigated by mechanical properties testing and microstructure observation. The results indicate that the addition of Y improves the microstructure of the as-cast alloy. The distribution of primary α-Al is uniform and orderly. The long needle-like eutectic Si phases and β-Fe phases turn to strips and short rods. When the content of Y increases to 0.2 wt%, the mean diameter of aAl(40.3 μm) and the aspect ratio of the eutectic Si phase(2.3) reach the minimum values, which are68.9% and 86.1% lower, respectively, than that of the alloy without Y addition. Under extrusion stress, the shape of the eutectic Si phase is changed from long rod-like to near grain-like after solution treatment.The size of the eutectic Si phase is significantly reduced. The needle-like β-Fe phases are squeezed and broken. The mechanical properties of the as-extruded alloy are significantly improved compared to the as-cast alloy. When the rare earth content is 0.2 wt%, the ultimate tensile strength, hardness and elongation of the alloy reach the maximum values, which are 328.2 MPa, 110.4 HV and 21.3%, respectively, and increase by 42.01%, 37.71% and 481.91%, respectively, in comparison to the as-cast alloy without Y addition.展开更多
The influences of deformation conditions on grain structure and properties of 7085 aluminum alloy were investigated by optical microscopy and transmission electron microscopy in combination with tensile and fracture t...The influences of deformation conditions on grain structure and properties of 7085 aluminum alloy were investigated by optical microscopy and transmission electron microscopy in combination with tensile and fracture toughness tests. The results show that the volume fraction of dynamic recrystallization increased with the decrease of Zener-Hollomon （Z） parameter, and the volume fraction of static recrystallization increased with the increasing of Z parameter. The strength and fracture toughness of the alloy after solution and aging treatment first increased and then decreased with the increase of Z parameter. The microstructure map was established on the basis of microstructure evolution during deformation and solution heat treatment. The optimization deformation conditions were acquired under Z parameters of 1.2×10^10-9.1×10^12.展开更多
基金National Natural Science Foundation of China(4160227)China Geological Survey(DD20160207,DD20189112).
文摘Geothermal energy is a precious resource,which is widely distributed,varied,and abundant.China has entered a period of rapid development of geothermal energy since 2010.As shallow geothermal energy promoting,the depth of hydrothermal geothermal exploration is increasing.The quality of Hot Dry Rock (HDR)and related exploratory technologies are better developed and utilized.On the basis of geothermal development,this paper reviews the geothermal progress during the "12th Five-Year Plan",and summarizes the achievements of hydrothermal geothermal and hot dry rocks from geothermal survey and evaluation aspects.Finally,the authors predict the development trend of the future geothermal research to benefit geothermal and hot dry rock research.
基金Project supported by the Natural Science Foundation of Jiangxi Province(20171BAB206034,20181BAB206026)
文摘The effects of the rare earth element yttrium(Y) and hot extrusion on the microstructure and mechanical properties of A356 alloy were investigated by mechanical properties testing and microstructure observation. The results indicate that the addition of Y improves the microstructure of the as-cast alloy. The distribution of primary α-Al is uniform and orderly. The long needle-like eutectic Si phases and β-Fe phases turn to strips and short rods. When the content of Y increases to 0.2 wt%, the mean diameter of aAl(40.3 μm) and the aspect ratio of the eutectic Si phase(2.3) reach the minimum values, which are68.9% and 86.1% lower, respectively, than that of the alloy without Y addition. Under extrusion stress, the shape of the eutectic Si phase is changed from long rod-like to near grain-like after solution treatment.The size of the eutectic Si phase is significantly reduced. The needle-like β-Fe phases are squeezed and broken. The mechanical properties of the as-extruded alloy are significantly improved compared to the as-cast alloy. When the rare earth content is 0.2 wt%, the ultimate tensile strength, hardness and elongation of the alloy reach the maximum values, which are 328.2 MPa, 110.4 HV and 21.3%, respectively, and increase by 42.01%, 37.71% and 481.91%, respectively, in comparison to the as-cast alloy without Y addition.
基金Projects (2010CB731701, 2012CB619502) supported by National Basic Research Program of ChinaProject (51021063) supported by Creative Research Group of National Natural Science Foundation of ChinaProject (CX2012B043) supported by Hunan Provincial Innovation Foundation for Postgraduate
文摘The influences of deformation conditions on grain structure and properties of 7085 aluminum alloy were investigated by optical microscopy and transmission electron microscopy in combination with tensile and fracture toughness tests. The results show that the volume fraction of dynamic recrystallization increased with the decrease of Zener-Hollomon （Z） parameter, and the volume fraction of static recrystallization increased with the increasing of Z parameter. The strength and fracture toughness of the alloy after solution and aging treatment first increased and then decreased with the increase of Z parameter. The microstructure map was established on the basis of microstructure evolution during deformation and solution heat treatment. The optimization deformation conditions were acquired under Z parameters of 1.2×10^10-9.1×10^12.
