This paper is focused on description of cool production in using WHR （Waste Heat Technology） Technology-a new method of centralized production of heat by using the waste heat from generated exhaust gas, which has be...This paper is focused on description of cool production in using WHR （Waste Heat Technology） Technology-a new method of centralized production of heat by using the waste heat from generated exhaust gas, which has been in 2009 developed and operated by companies HELORO s.r.o, and COMTHERM s.r.o.展开更多
Multi-charged helium ion beam He2＋ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning. An attempt to gene...Multi-charged helium ion beam He2＋ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning. An attempt to generate milliampere multi-charged helium He2＋ ion beam with a 2.45 GHz electron cyclotron resonance ion source （ECRIS） was tested recently. A design using a specfic permanent magnet 2.45 GHz ECRIS （PMECRIS） source （ERCIS） is reported and the He2~ beam production ability is described. With this source, we produced a total helium beam of 40 mA at 40 kV with 180 W of net microwave power and a gas flow of less than 0.5 seem. At steady state the He2＋ beam intensity is 4.4 rnA, that being the fraction of multi-charged he- lium ion beam is at approximately 11%.展开更多
The fluid variational theory and effective one-component model have been used to calculate the Hugoniot equation of state （EOS） of fluid He, D2, and He+D2 mixtures with different He:D2 compositions under high pressu...The fluid variational theory and effective one-component model have been used to calculate the Hugoniot equation of state （EOS） of fluid He, D2, and He+D2 mixtures with different He:D2 compositions under high pressures and temperatures. An examination of the confidence of above computation is performed by comparing experiment and calculation, in which the similar calculation procedure used for He+D2 is adopted, of He and D2 each, since no experimental data are available to conduct this kind of comparison. Good agreement in both comparisons is found. This fact may be looked as if an indirect positive verification of calculation procedure used here at least in the pressure and temperature domain covered by the experimental data of He and D2 used for comparison, numerically nearly up to 35 GPa and 105K.展开更多
文摘This paper is focused on description of cool production in using WHR （Waste Heat Technology） Technology-a new method of centralized production of heat by using the waste heat from generated exhaust gas, which has been in 2009 developed and operated by companies HELORO s.r.o, and COMTHERM s.r.o.
基金supported by the National Natural Science Foundation of China(Grant Nos.11075008 and 11175009)
文摘Multi-charged helium ion beam He2＋ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning. An attempt to generate milliampere multi-charged helium He2＋ ion beam with a 2.45 GHz electron cyclotron resonance ion source （ECRIS） was tested recently. A design using a specfic permanent magnet 2.45 GHz ECRIS （PMECRIS） source （ERCIS） is reported and the He2~ beam production ability is described. With this source, we produced a total helium beam of 40 mA at 40 kV with 180 W of net microwave power and a gas flow of less than 0.5 seem. At steady state the He2＋ beam intensity is 4.4 rnA, that being the fraction of multi-charged he- lium ion beam is at approximately 11%.
文摘The fluid variational theory and effective one-component model have been used to calculate the Hugoniot equation of state （EOS） of fluid He, D2, and He+D2 mixtures with different He:D2 compositions under high pressures and temperatures. An examination of the confidence of above computation is performed by comparing experiment and calculation, in which the similar calculation procedure used for He+D2 is adopted, of He and D2 each, since no experimental data are available to conduct this kind of comparison. Good agreement in both comparisons is found. This fact may be looked as if an indirect positive verification of calculation procedure used here at least in the pressure and temperature domain covered by the experimental data of He and D2 used for comparison, numerically nearly up to 35 GPa and 105K.
