The Al-2.5C master alloy is prepared to investigate the effect of the Al4C3 particle size distribution on the refining efficiency of the AZ31 alloy. The results indicate that the Al4C3 particles are potent nucleation ...The Al-2.5C master alloy is prepared to investigate the effect of the Al4C3 particle size distribution on the refining efficiency of the AZ31 alloy. The results indicate that the Al4C3 particles are potent nucleation substrates for primary α-Mg grains. With 1.0 wt% master alloy addition, the grain size is reduced from 204 to 70 μm. The grain refining efficiency of the Al4C3 particles on the AZ31 alloy is calculated to be 0.04%-0.75%. Such low refining efficiency is mainly attributed to the size distribution of the Al4C3 particles. The particle sizes are in the range from 0.18 to 7.08 μm, and their distribution is well fitted by a log-normal function. The optimum particle size range for significant grain refinement is proposed to be around 5.0-7.08 μm in the present conditions.展开更多
The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum(ELTA)without and with the Al-4B addition and the Al-5Ti-1B master alloy in pure Al were com...The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum(ELTA)without and with the Al-4B addition and the Al-5Ti-1B master alloy in pure Al were comparatively investigated. The results show that the Ti existing in ELTA without Al-4B addition exhibits a certain grain refining efficiency when the melt superheating temperature is lower,but the efficiency decreases rapidly when the superheating temperature is higher.The grain refining efficiency of the Al-5Ti-1B master alloy is better than that of the Ti existing in ELTA without Al-4B addition at any superheating temperature,but it also decreases obviously with the increase of the superheating temperature.One important reason is that the TiB2 particles coming from the Al-5Ti-1B master alloy can settle down at the bottom of the Al melt easily when the superheating temperature is increased,thus decrease the number of the potent heterogeneous nuclei retained in the Al melt.If the Al-4B master alloy is added to the ELTA melt,the grain refining efficiency of the Ti existing in ELTA can be improved significantly, and does not decrease with the increase of the superheating temperature.This perhaps provides us a possible method to suppress the effect of the superheated melt on the microstructures of aluminum..展开更多
基金supported by the National Key Research and Development Program of China(No.2016YFB0701204)the project(DUT15JJ(G)01)supported by the Fundamental Research Funds for the Central Universities
文摘The Al-2.5C master alloy is prepared to investigate the effect of the Al4C3 particle size distribution on the refining efficiency of the AZ31 alloy. The results indicate that the Al4C3 particles are potent nucleation substrates for primary α-Mg grains. With 1.0 wt% master alloy addition, the grain size is reduced from 204 to 70 μm. The grain refining efficiency of the Al4C3 particles on the AZ31 alloy is calculated to be 0.04%-0.75%. Such low refining efficiency is mainly attributed to the size distribution of the Al4C3 particles. The particle sizes are in the range from 0.18 to 7.08 μm, and their distribution is well fitted by a log-normal function. The optimum particle size range for significant grain refinement is proposed to be around 5.0-7.08 μm in the present conditions.
文摘The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum(ELTA)without and with the Al-4B addition and the Al-5Ti-1B master alloy in pure Al were comparatively investigated. The results show that the Ti existing in ELTA without Al-4B addition exhibits a certain grain refining efficiency when the melt superheating temperature is lower,but the efficiency decreases rapidly when the superheating temperature is higher.The grain refining efficiency of the Al-5Ti-1B master alloy is better than that of the Ti existing in ELTA without Al-4B addition at any superheating temperature,but it also decreases obviously with the increase of the superheating temperature.One important reason is that the TiB2 particles coming from the Al-5Ti-1B master alloy can settle down at the bottom of the Al melt easily when the superheating temperature is increased,thus decrease the number of the potent heterogeneous nuclei retained in the Al melt.If the Al-4B master alloy is added to the ELTA melt,the grain refining efficiency of the Ti existing in ELTA can be improved significantly, and does not decrease with the increase of the superheating temperature.This perhaps provides us a possible method to suppress the effect of the superheated melt on the microstructures of aluminum..
