The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings （TBCs） materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3...The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings （TBCs） materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3 mol% Yb2O3 （GYb-YSZ） powders are synthesized by solid state reaction for 24 h at various temperatures. As temperature increases, stabilizers are dissolved into zirconia matrix gradually. Synthesized at 1 500 °C, GYb-YSZ is basically composed of cubic phase. GYb-YSZ exhibits excellent phase stability and sinters lower than 8YSZ by nearly three times. The thermal conductivity of GYb-YSZ is much lower than that of 8YSZ, and the thermal expansion coefficient of GYb-YSZ is comparable to that of 8YSZ. The influence of Gd2O3 and Yb2O3 co-doping on phase stability, thermal conductivity and sintering of 8YSZ is discussed.展开更多
Lead-free glass-ceramic composites in barium sodium niobate silica system with Gd2O3 addition were synthesized through melt-casting fol-lowed by controlled crystallization technique. Crystallization and dielectric pro...Lead-free glass-ceramic composites in barium sodium niobate silica system with Gd2O3 addition were synthesized through melt-casting fol-lowed by controlled crystallization technique. Crystallization and dielectric properties of the Gd2O3 adding glass-ceramic composites were investigated. With the increase in the concentration of Gd2O3, the glass transition temperature and the crystallization temperature of the pre-cursor glass shift towards the higher temperature. The crystallization behavior that occurred during the heat treatment procedure leads to the enhancement of dielectric constant. All the three compositions of glass-ceramic composites exhibit ferroelectricity when tested at room tem-perature. Both the values of the remanent polarization and coercive field are enhanced regularly with the gradual increase in the concentration of Gd2O3 additive under the same testing field.展开更多
Mg-Li-Gd alloys were prepared by electrochemical codeposition from LiCl-KCl-MgCl 2 -Gd 2 O 3 melts on molybdenum electrode with constant current density at 823 and 973 K. The microstructure of the Mg-Li-Gd alloys was ...Mg-Li-Gd alloys were prepared by electrochemical codeposition from LiCl-KCl-MgCl 2 -Gd 2 O 3 melts on molybdenum electrode with constant current density at 823 and 973 K. The microstructure of the Mg-Li-Gd alloys was analyzed by X-ray diffraction （XRD）, optical microscopy （OM） and scanning electron microscopy （SEM）. The results show that magnesium and gadolinium deposit mainly in the first 30 min, and the alloy obtained contains 96.53% Mg, 0.27% Li and 3.20% Gd （mass fraction）. Then, the reduction of lithium ions occurs quickly. The composition of alloy can be adjusted by controlling electrolysis time or Gd 2 O 3 concentration in LiCl-KCl melts. With the addition of Gd into Mg-Li alloys, the corrosion resistance of the alloys is enhanced. XRD results suggest that Mg 3 Gd and Mg 2 Gd can be formed in Mg-Li-Gd alloys. The distribution of Gd element in Mg-Li-Gd alloys indicates that Gd element mainly distributes at the grain boundaries of Mg-Li-Gd alloys.展开更多
Gd2O3nanoparticles were synthesized from the commercial bulk Gd2O3 powders via a simple electrochemical method. The synthesized powders were characterized by means of X-ray powder diffraction(XRD),scanning electron mi...Gd2O3nanoparticles were synthesized from the commercial bulk Gd2O3 powders via a simple electrochemical method. The synthesized powders were characterized by means of X-ray powder diffraction(XRD),scanning electron microscopy(SEM), transmission electron microscopy(TEM) and Fourier transform infrared(FTIR) spectroscopy. The effects of solution p H on the morphological features of the sample were studied. The strategy developed in this study offers significant advantages for the synthesis of Gd2O3 nanoparticles from the bulk Gd2O3 powders compared with the conventional routes. From SEM observations, the size of the Gd2O3 nanoparticles is estimated to be significantly smaller than70 nm.展开更多
基金National Natural Science Foundation of China (50771009, 50731001)National Basic Research Program of China (2010CB631200)Research Fund for the Doctoral Program of Higher Education of China (20070006017)
文摘The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings （TBCs） materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3 mol% Yb2O3 （GYb-YSZ） powders are synthesized by solid state reaction for 24 h at various temperatures. As temperature increases, stabilizers are dissolved into zirconia matrix gradually. Synthesized at 1 500 °C, GYb-YSZ is basically composed of cubic phase. GYb-YSZ exhibits excellent phase stability and sinters lower than 8YSZ by nearly three times. The thermal conductivity of GYb-YSZ is much lower than that of 8YSZ, and the thermal expansion coefficient of GYb-YSZ is comparable to that of 8YSZ. The influence of Gd2O3 and Yb2O3 co-doping on phase stability, thermal conductivity and sintering of 8YSZ is discussed.
基金supported by the National Natural Science Foundation of China (No. 51107005)
文摘Lead-free glass-ceramic composites in barium sodium niobate silica system with Gd2O3 addition were synthesized through melt-casting fol-lowed by controlled crystallization technique. Crystallization and dielectric properties of the Gd2O3 adding glass-ceramic composites were investigated. With the increase in the concentration of Gd2O3, the glass transition temperature and the crystallization temperature of the pre-cursor glass shift towards the higher temperature. The crystallization behavior that occurred during the heat treatment procedure leads to the enhancement of dielectric constant. All the three compositions of glass-ceramic composites exhibit ferroelectricity when tested at room tem-perature. Both the values of the remanent polarization and coercive field are enhanced regularly with the gradual increase in the concentration of Gd2O3 additive under the same testing field.
基金Project(2009AA050702)supported by the National High-tech Research and Development Program of ChinaProject(GC06A212)supported by the Scientific Technology Project of Heilongjiang Province,China+2 种基金Project(50871033)supported by the National Natural Science Foundation of ChinaProject(208181)supported by the Key Project of Ministry of Education,ChinaProject(HEUCF101002)supported by the Fundamental Research Funds for the Central Universities,China
文摘Mg-Li-Gd alloys were prepared by electrochemical codeposition from LiCl-KCl-MgCl 2 -Gd 2 O 3 melts on molybdenum electrode with constant current density at 823 and 973 K. The microstructure of the Mg-Li-Gd alloys was analyzed by X-ray diffraction （XRD）, optical microscopy （OM） and scanning electron microscopy （SEM）. The results show that magnesium and gadolinium deposit mainly in the first 30 min, and the alloy obtained contains 96.53% Mg, 0.27% Li and 3.20% Gd （mass fraction）. Then, the reduction of lithium ions occurs quickly. The composition of alloy can be adjusted by controlling electrolysis time or Gd 2 O 3 concentration in LiCl-KCl melts. With the addition of Gd into Mg-Li alloys, the corrosion resistance of the alloys is enhanced. XRD results suggest that Mg 3 Gd and Mg 2 Gd can be formed in Mg-Li-Gd alloys. The distribution of Gd element in Mg-Li-Gd alloys indicates that Gd element mainly distributes at the grain boundaries of Mg-Li-Gd alloys.
基金financially supported by the Nuclear Science and Technology Research Institute of Iran
文摘Gd2O3nanoparticles were synthesized from the commercial bulk Gd2O3 powders via a simple electrochemical method. The synthesized powders were characterized by means of X-ray powder diffraction(XRD),scanning electron microscopy(SEM), transmission electron microscopy(TEM) and Fourier transform infrared(FTIR) spectroscopy. The effects of solution p H on the morphological features of the sample were studied. The strategy developed in this study offers significant advantages for the synthesis of Gd2O3 nanoparticles from the bulk Gd2O3 powders compared with the conventional routes. From SEM observations, the size of the Gd2O3 nanoparticles is estimated to be significantly smaller than70 nm.
