Due to the increasingly strict emission standards of NOx on various industries,many traditional flue gas treatment methods have been gradually improved.Except for selective catalytic reduction(SCR)and selective non-ca...Due to the increasingly strict emission standards of NOx on various industries,many traditional flue gas treatment methods have been gradually improved.Except for selective catalytic reduction(SCR)and selective non-catalytic reduction(SNCR)methods to remove NOx from flue gas,theoxidation method is paying more attention to NOx removal now because of the potential to simultaneously remove multiple pollutants from flue gas.This paper summarizes the efficiency,reaction conditions,effect factors,and reaction mechanism of NO oxidation from the aspects of liquid-phase oxidation,gas-phase oxidation,plasma technology,and catalytic oxidation.The effects of free radicals and active components of catalysts on NO oxidation and the combination of various oxidation methods are discussed in detail.The advantages and disadvantages of different oxidation methods are summarized,and the suggestions for future research on NO oxidation are put forward at the end.The review on the NO removal by oxidation methods can provide new ideas for future studies on the NO removal from flue gas.展开更多
Based on previous research, the sampling and analysis methods for phthalate esters （PAEs） were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 h...Based on previous research, the sampling and analysis methods for phthalate esters （PAEs） were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 hr. Meanwhile, through the optimization of chromatographic conditions, the concentrations of 9 additional PAE pollutants in indoor air were measured. The optimized chromatographic conditions required a similar amount of time for analysis as before, but gave high responsivity, the capability of simultaneously distinguishing 15 kinds of PAEs, and a high level of discrimination between individual sample peaks, as well as stable peak generation. The recovery rate of all gas-phase and particle-phase samples of the 15 kinds of PAEs ranged from 91.26% to 109.42%, meeting the quantitative analysis requirements for indoor and outdoor air sampling and analysis. For the first time, investigation of the concentration levels as well as characteristics of 15 kinds of PAEs in the indoor air from four different traffic micro-environments （private vehicles, busses, taxis and subways） was carried out, along with validation of the optimized sampling and analytical method. The results show that all the 9 additional PAEs could be detected at relatively high pollution levels in the indoor air from the four traffic micro-environments. As none of the pollution levels of the 15 kinds of PAEs in the indoor air from the 4 traffic micro-environments should be neglected, it is of great significance to increase the types of PAEs able to be detected in indoor air.展开更多
Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar f...Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective CH4.Ru doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) adsorption.High-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction activity.The optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.展开更多
This article briefly reviewed the advances in the process of the direct oxidation of methane to methanol （DMTM） with both heterogeneous and homogeneous oxidation. Attention was paid to the conversion of methane by t...This article briefly reviewed the advances in the process of the direct oxidation of methane to methanol （DMTM） with both heterogeneous and homogeneous oxidation. Attention was paid to the conversion of methane by the heterogeneous oxidation process with various transition metal ox‐ides. The most widely studied catalysts are based on molybdenum and iron. For the homogeneous gas phase oxidation, several process control parameters were discussed. Reactor design has the most crucial role in determining its commercialization. Compared to the above two systems, aque‐ous homogenous oxidation is an efficient route to get a higher yield of methanol. However, the cor‐rosive medium in this method and its serious environmental pollution hinder its widespread use. The key challenge to the industrial application is to find a green medium and highly efficient cata‐lysts.展开更多
The development of functional relationships between the observed deposition rate and the experimental conditions is an important step toward understanding and optimizing low-pressure chemical vapor deposition(LPCVD)or...The development of functional relationships between the observed deposition rate and the experimental conditions is an important step toward understanding and optimizing low-pressure chemical vapor deposition(LPCVD)or low-pressure chemical vapor infiltration(LPCVI).In the field of ceramic matrix composites(CMCs),methyltrichlorosilane(CH3 SiCl3,MTS)is the most widely used source gas system for SiC,because stoichiometric SiC deposit can be facilitated at 900°C–1300°C.However,the reliability and accuracy of existing numerical models for these processing conditions are rarely reported.In this study,a comprehensive transport model was coupled with gas-phase and surface kinetics.The resulting gas-phase kinetics was confirmed via the measured concentration of gaseous species.The relationship between deposition rate and 24 gaseous species has been effectively evaluated by combining the special superiority of the novel extreme machine learning method and the conventional sticking coefficient method.Surface kinetics were then proposed and shown to reproduce the experimental results.The proposed simulation strategy can be used for different material systems.展开更多
To improve the performance of battery cathode materials that consist of carbonaceous organic material, carbon coatings on lithium iron phosphate （LiFePO4/C） materials were synthesized by different carbon sources. Li...To improve the performance of battery cathode materials that consist of carbonaceous organic material, carbon coatings on lithium iron phosphate （LiFePO4/C） materials were synthesized by different carbon sources. LiFePO4/C was synthesized by a combination method of sol-gel and gas-phase diffused permeation. LiFeO4/C materials were prepared by coating different carbon con- tents. High-performance composite materials were pre- pared by combining carbon with element doped by two modified methods. The elements of Fe and C came from Fe3＋ and sucrose, glucose, citric acid. Thermogravimetry- differential thermal analysis （TG-DTA）, X-ray diffrac- tometer （XRD）, scanning electron microscope （SEM）, cycle voltammetry （CV）, and charge-discharge test were used to characterize and test the surface morphology, structure, and electrochemical performance. The results show that LiFePO4/C synthesized with sucrose has higher specific discharge capacity than the other materials. The specific discharge capacity of this material is 84.27 mAh.g-1. The capacity retention could attain 94 % of the initial discharge capacity after 30 cycles, showing good electrochemical performance.展开更多
La–Mg–Ni-based hydrogen storage alloys have excellent hydrogen storage properties.This work reports the hydrogen storage performance of a series of A_(2)B_(7)-type La_(0.96)Mg_(0.04)N_(i3.34)Al_(0.13)alloy and La_(0...La–Mg–Ni-based hydrogen storage alloys have excellent hydrogen storage properties.This work reports the hydrogen storage performance of a series of A_(2)B_(7)-type La_(0.96)Mg_(0.04)N_(i3.34)Al_(0.13)alloy and La_(0.96-x)Y_(x)Mg_(0.04)Ni_(3.47–0.6x)Al_(0.6x)(x=0,0.22,0.33,0.44)alloys,and explores the effect of Y and Al element combined substitution on the microstructure and hydrogen storage performance of A_(2)B_(7)-type La–Mg–Ni-based alloys.The alloys are composed of Ce_(2)Ni_(7)phase and LaNi_(5)phase.With the increase of x,the cell volume of Ce_(2)Ni_(7)phase decreases,while that of LaNi_(5)phase increases,indicating that Y atom mainly enters Ce_(2)Ni_(7)phase and Al atom mainly enters LaNi_(5)phase.An appropriate amount of co-substitution increases the hydrogen storage capacity and reduces the hydrogen absorption/desorption plateau pressure hysteresis of the alloy.When x=0.44,the hydrogen storage capacity of the alloy is 1.449 wt%,and the hysteresis coefficient is 0.302.The cell volume of Ce_(2)Ni_(7)phase and LaNi_(5)phase expands to different degrees after 20 absorption/desorption cycles.With the increase of x,the volume expansion rate decreases,and the cycle capacity retention rate also gradually decreases.This is related to the amorphization of Ce_(2)Ni_(7)phase.When x=0.22,the capacity retention rate of the alloy is 91.4%.展开更多
基金supported by National Key Research and Development Program of China(No.2018YFB0605101)the Key Project Natural Science Foundation of Tianjin(No.18JCZDJC39800)+4 种基金the Key R&D projects in Hebei Province(No.20373701D)the National Natural Science Foundation of China(No.51808181)the Science and Technology Key Project of Tianjin(Nos.18ZXSZSF00040,18KPXMSF00080,18PTZWHZ00010)Department of Education of Hebei Province(No.BJ2017032)Joint Doctoral Training Foundation of HEBUT(No.2017HW0002)。
文摘Due to the increasingly strict emission standards of NOx on various industries,many traditional flue gas treatment methods have been gradually improved.Except for selective catalytic reduction(SCR)and selective non-catalytic reduction(SNCR)methods to remove NOx from flue gas,theoxidation method is paying more attention to NOx removal now because of the potential to simultaneously remove multiple pollutants from flue gas.This paper summarizes the efficiency,reaction conditions,effect factors,and reaction mechanism of NO oxidation from the aspects of liquid-phase oxidation,gas-phase oxidation,plasma technology,and catalytic oxidation.The effects of free radicals and active components of catalysts on NO oxidation and the combination of various oxidation methods are discussed in detail.The advantages and disadvantages of different oxidation methods are summarized,and the suggestions for future research on NO oxidation are put forward at the end.The review on the NO removal by oxidation methods can provide new ideas for future studies on the NO removal from flue gas.
基金support by the Hi-Tech Research and Development Program(863) of China(No.2010AA064902)the National Key Technologies R&D Program(No.2016YFC0207100)+1 种基金the National Natural Science Foundation of China(No.21207116)the Brain Bridge project with Philips(No.BB3-2016-01)
文摘Based on previous research, the sampling and analysis methods for phthalate esters （PAEs） were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 hr. Meanwhile, through the optimization of chromatographic conditions, the concentrations of 9 additional PAE pollutants in indoor air were measured. The optimized chromatographic conditions required a similar amount of time for analysis as before, but gave high responsivity, the capability of simultaneously distinguishing 15 kinds of PAEs, and a high level of discrimination between individual sample peaks, as well as stable peak generation. The recovery rate of all gas-phase and particle-phase samples of the 15 kinds of PAEs ranged from 91.26% to 109.42%, meeting the quantitative analysis requirements for indoor and outdoor air sampling and analysis. For the first time, investigation of the concentration levels as well as characteristics of 15 kinds of PAEs in the indoor air from four different traffic micro-environments （private vehicles, busses, taxis and subways） was carried out, along with validation of the optimized sampling and analytical method. The results show that all the 9 additional PAEs could be detected at relatively high pollution levels in the indoor air from the four traffic micro-environments. As none of the pollution levels of the 15 kinds of PAEs in the indoor air from the 4 traffic micro-environments should be neglected, it is of great significance to increase the types of PAEs able to be detected in indoor air.
基金supported by the Ministry of Science and ICT in Korea(2021R1A2C2009459)X-ray absorption spectra were obtained from Pohang Accelerator Laboratory(PAL)10C beamlinesupported by the US Department of Energy,Office of Science,Office of Advanced Scientific Computing Research,and Scientific Discovery through Advanced Computing(SciDAC)program under Award Number DE-SC0022209.
文摘Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective CH4.Ru doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) adsorption.High-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction activity.The optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.
基金supported by the Petrochemical Joint Funds of NSFC-CNPC (U1362202)the Postgraduate Innovation Project of China University of Petroleum (East China) (YCXJ2016030)~~
文摘This article briefly reviewed the advances in the process of the direct oxidation of methane to methanol （DMTM） with both heterogeneous and homogeneous oxidation. Attention was paid to the conversion of methane by the heterogeneous oxidation process with various transition metal ox‐ides. The most widely studied catalysts are based on molybdenum and iron. For the homogeneous gas phase oxidation, several process control parameters were discussed. Reactor design has the most crucial role in determining its commercialization. Compared to the above two systems, aque‐ous homogenous oxidation is an efficient route to get a higher yield of methanol. However, the cor‐rosive medium in this method and its serious environmental pollution hinder its widespread use. The key challenge to the industrial application is to find a green medium and highly efficient cata‐lysts.
基金the National Key R&D Program of China(Grants No.2017YFB0703200)National Natural Science Foundation of China(Grants Nos.51702100,51972268)China Postdoctoral Science Foundation(Grants No.2018M643075)for financial support。
文摘The development of functional relationships between the observed deposition rate and the experimental conditions is an important step toward understanding and optimizing low-pressure chemical vapor deposition(LPCVD)or low-pressure chemical vapor infiltration(LPCVI).In the field of ceramic matrix composites(CMCs),methyltrichlorosilane(CH3 SiCl3,MTS)is the most widely used source gas system for SiC,because stoichiometric SiC deposit can be facilitated at 900°C–1300°C.However,the reliability and accuracy of existing numerical models for these processing conditions are rarely reported.In this study,a comprehensive transport model was coupled with gas-phase and surface kinetics.The resulting gas-phase kinetics was confirmed via the measured concentration of gaseous species.The relationship between deposition rate and 24 gaseous species has been effectively evaluated by combining the special superiority of the novel extreme machine learning method and the conventional sticking coefficient method.Surface kinetics were then proposed and shown to reproduce the experimental results.The proposed simulation strategy can be used for different material systems.
基金financially supported by the National Natural Science Foundation of China (No.51274143)
文摘To improve the performance of battery cathode materials that consist of carbonaceous organic material, carbon coatings on lithium iron phosphate （LiFePO4/C） materials were synthesized by different carbon sources. LiFePO4/C was synthesized by a combination method of sol-gel and gas-phase diffused permeation. LiFeO4/C materials were prepared by coating different carbon con- tents. High-performance composite materials were pre- pared by combining carbon with element doped by two modified methods. The elements of Fe and C came from Fe3＋ and sucrose, glucose, citric acid. Thermogravimetry- differential thermal analysis （TG-DTA）, X-ray diffrac- tometer （XRD）, scanning electron microscope （SEM）, cycle voltammetry （CV）, and charge-discharge test were used to characterize and test the surface morphology, structure, and electrochemical performance. The results show that LiFePO4/C synthesized with sucrose has higher specific discharge capacity than the other materials. The specific discharge capacity of this material is 84.27 mAh.g-1. The capacity retention could attain 94 % of the initial discharge capacity after 30 cycles, showing good electrochemical performance.
基金supported by the National Key Research and Development Program of China(No.2022YFB3803800)the National Natural Science Foundation of China(Nos.51971197 and 52071281)+4 种基金the Basic Innovation Research Project in Yanshan University(No.2022LGZD004)the China Postdoctoral Science Foundation(No.2023M742945)the Postdoctoral Research Project of Hebei Province(No.B2023003023)the Subsidy for Hebei Key Laboratory of Applied Chemistry after Operation Performance(No.22567616H)the Special Project for Local Science and Technology Development Guided by the Central Government of China(No.236Z1406G).
文摘La–Mg–Ni-based hydrogen storage alloys have excellent hydrogen storage properties.This work reports the hydrogen storage performance of a series of A_(2)B_(7)-type La_(0.96)Mg_(0.04)N_(i3.34)Al_(0.13)alloy and La_(0.96-x)Y_(x)Mg_(0.04)Ni_(3.47–0.6x)Al_(0.6x)(x=0,0.22,0.33,0.44)alloys,and explores the effect of Y and Al element combined substitution on the microstructure and hydrogen storage performance of A_(2)B_(7)-type La–Mg–Ni-based alloys.The alloys are composed of Ce_(2)Ni_(7)phase and LaNi_(5)phase.With the increase of x,the cell volume of Ce_(2)Ni_(7)phase decreases,while that of LaNi_(5)phase increases,indicating that Y atom mainly enters Ce_(2)Ni_(7)phase and Al atom mainly enters LaNi_(5)phase.An appropriate amount of co-substitution increases the hydrogen storage capacity and reduces the hydrogen absorption/desorption plateau pressure hysteresis of the alloy.When x=0.44,the hydrogen storage capacity of the alloy is 1.449 wt%,and the hysteresis coefficient is 0.302.The cell volume of Ce_(2)Ni_(7)phase and LaNi_(5)phase expands to different degrees after 20 absorption/desorption cycles.With the increase of x,the volume expansion rate decreases,and the cycle capacity retention rate also gradually decreases.This is related to the amorphization of Ce_(2)Ni_(7)phase.When x=0.22,the capacity retention rate of the alloy is 91.4%.
