The uniaxial compression experiments on the sandstone samples containing double fissures and a single circular hole were carried out by using electro-hydraulic servo universal testing machine to investigate the effect...The uniaxial compression experiments on the sandstone samples containing double fissures and a single circular hole were carried out by using electro-hydraulic servo universal testing machine to investigate the effect of rock bridge angle β and fissure angle α on mechanical properties and evolution characteristics of cracks.The results show that the peak strength,peak strain and elastic modulus of defected specimens decrease comparing with those for intact sample,and show a decreased trend firstly and then increase with β changing from 0° to 90°.The peak strength and elastic modulus achieve the minimum value as the rock bridge angle is 60°,while the peak strain reaches the minimum value with the rock bridge angle of 45°.The crack initiation of tested rock samples occurs firstly in stress concentration areas at tips of prefabricated fissures under uniaxial compression,and then propagates constantly and coalescences with the prefabricated hole.Some secondary cracks initiate and propagate as well until buckling failure happens.The rock bridge angle has a great influence on crack initiation,coalescence,final failure mode,crack initiation stress and transfixion stress.The peak strength varies significantly,while the elastic modulus and peak strain change slightly,and the failure modes are also different due to the influence of fissure angle.展开更多
Based on experimental restilts of brittle, intact sandstone under uniaxial compression, the micro-parameters were firstly confirmed by adopting particle flow code （PFC2D）. Then, the validation of the simulated model...Based on experimental restilts of brittle, intact sandstone under uniaxial compression, the micro-parameters were firstly confirmed by adopting particle flow code （PFC2D）. Then, the validation of the simulated models were cross checked with the experimental results of brittle sandstone containing three parallel fissures under uniaxial compression. The simulated results agreed very well with the experimental results, including the peak strength, peak axial strain, and ultimate failure mode. Using the same micro- parameters, the numerical models containing a new geometry of three fissures are constructed to investigate the fissure angle on the fracture mechanical behavior of brittle sandstone under uniaxial compression. The strength and deformation parameters of brittle sandstone containing new three fissures are dependent to the fissure angle. With the increase of the fis- sure angle, the elastic modulus, the crack damage threshold, and the peak strength of brittle sandstone containing three fissures firstly increase and secondly decrease. But the peak axial strain is nonlinearly related to the fissure angle. In the entire process of deformation, the crack initiation and propagation behavior of brittle sandstone containing three fissures under uniaxial compression are investigated with respect to the fissure angle. Six different crack coalescence modes are identified for brittle sandstone containing three fissures under uniaxial compression. The influence of the fissure angle on the length of crack propagation and crack coalescence stress is evaluated. These investigated conclusions are very important for ensuring the stability and safety of rock engineering with intermittent structures.展开更多
Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalesce...Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalescence process, a series of uniaxial compression tests were carried out for rock-like material with two unparallel fissures.In the present study, cement, quartz sand, and water were used to fabricate a kind of brittle rock-like material cylindrical model specimen. The mechanical properties of rock-like material specimen used in this research were all in good agreement with the brittle rock materials. Two unparallel fissures（a horizontal fissure and an inclined fissure） were created by inserting steel during molding the model specimen.Then all the pre-fissured rock-like specimens were tested under uniaxial compression by a rock mechanics servocontrolled testing system. The peak strength and Young＇s modulus of pre-fissured specimen all first decreased and then increased when the fissure angle increased from 0？to 75？.In order to investigate the crack initiation, propagation and coalescence process, photographic monitoring was adopted to capture images during the entire deformation process.Moreover, acoustic emission（AE） monitoring technique was also used to obtain the AE evolution characteristic of prefissured specimen. The relationship between axial stress, AE events, and the crack coalescence process was set up： when a new crack was initiated or a crack coalescence occurred, thecorresponding axial stress dropped in the axial stress–time curve and a big AE event could be observed simultaneously.Finally, the mechanism of crack propagation under microscopic observation was discussed. These experimental results are expected to increase the understanding of the strength failure behavior and the cracking mechanism of rock containing unparallel fissures.展开更多
A series of laboratory experiments and PFC numerical simulations for rock-like material specimens containing two unparallel fissures were carried out.On the basis of experimental and numerical results,the stress-strai...A series of laboratory experiments and PFC numerical simulations for rock-like material specimens containing two unparallel fissures were carried out.On the basis of experimental and numerical results,the stress-strain curves,mechanical properties,AE events,cracking behavior and energy characteristics were analyzed to reveal the macro-mechanical behavior and meso-mechanism of pre-fissured specimens under different loading rates.Investigated results show that:1)When the loading rate is relatively low,the stress-strain curves show a brittle response.When the loading rate is relatively high,the curve shows a more ductile response.Both of the peak strength and elastic mudulus increase with the increase of loading rate,which can be expressed as power functions.2)Four crack types are identified,i.e.,tensile crack,shear crack,far-field crack and surface spalling.Moreover,the tensile crack,far-field crack and surface spalling are under tensile mechanism,while the shear crack is under shear mechanism.3)The drops of the stress-strain curves all correspond to the crack initiation or coalescence,which is also linked to a sudden increasing in the accumulated micro-crack curve.4)Both of the maximum bond force and energy have the similar trend with the increase of loading rate to peak strength,which indicates that the trend of peak strength can be explained by the meso-mechanics and energy.展开更多
Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore groun...Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore ground deformation monitoring together with the analysis of its driving forces are critical for geo-hazards early-warning, city planning and sustainable urbanization in Shanghai. In this paper, two-dimensional ground deformation monitoring was performed in Shanghai with SBAS and MSBAS InSAR methods. Twenty-nine Multi-Look Fine 6 （MF6） Radarsat-2 SLC data acquired during 2011-2013 were used to derive vertical ground deformation. Meanwhile, six descending Multi-Look Fine 6 （MF6） and four ascending Multi-Look Fine 2 （MF2） spanning April to August, 2008, were used to derive vertical and horizontal ground deformation during the observation period. The results indicate that vertical and horizontal deformations in 2008 were not homogeneously distributed in different districts ranging from 0-2 cm/year. Vertical deformation rate during 2011-2013 were decreased to less than 1 cm/year in most district of Shanghai area. Activities from groundwater exploitation and rapid urbanization are responsible for most of the ground deformation in Shanghai. Thus, future ground deformation in vertical and horizontal directions should be warranted.展开更多
Ground fissure hazards frequently emerge in Hebei Plain, which damage roads, dams, buildings and farmland. The paper reviews and analyses current state of knowledge and research into ground fissure and geological envi...Ground fissure hazards frequently emerge in Hebei Plain, which damage roads, dams, buildings and farmland. The paper reviews and analyses current state of knowledge and research into ground fissure and geological environment in Hebei Plain. It is shown that the level of research and investigation is in some aspects insufficient. Knowledge is lacking in the use of corresponding geological concept models for specific ground fissures, three-dimensional numerical simulations of ground fissures caused by pumping through soil with pre-existing fractures, numerical simulations of ground fissures caused by dislocation in intersection faults, and the failure criterion and the constitutive relationship of rock and soil. Furthermore, we put forward geological concept models for ground fissure formation following the dislocation of a buried intersection fault, over-exploitation of groundwater and its compound origin mechanisms in order to provide scientific evidence for the quantitative analysis.展开更多
Anorectal complaints are very common and are caused by a variety of mostly benign anorectal disorders.Many anorectal conditions may be successfully treated by primary care physicians in the outpatient setting,but pati...Anorectal complaints are very common and are caused by a variety of mostly benign anorectal disorders.Many anorectal conditions may be successfully treated by primary care physicians in the outpatient setting,but patients tend not to seek medical attention due to embarrassment or fear of cancer.As a result,patients frequently present with advanced disease after experiencing significant decreases in quality of life.A number of patients with anorectal complaints are referred to gastroenterologists.However,gastroenterologists' knowledge and experience in approaching these conditions may not be sufficient.This article can serve as a guide to gastroenterologists to recognize,evaluate,and manage medically or non-surgically common benign anorectal disorders,and to identify when surgical referrals are most prudent.A review of the current literature is performed to evaluate comprehensive clinical pearls and management guidelines for each topic.Topics reviewed include hemorrhoids,anal fissures,anorectal fistulas and abscesses,and pruritus ani.展开更多
基金Financial support for this work, provided by the National Key Basic Research Development Plan Project of China (No.2013CB036003)the National Natural Science Foundation of China (Nos.51134001,51374198)the Young Scientists Fund of the National Science Foundation of China (No.51504247)
文摘The uniaxial compression experiments on the sandstone samples containing double fissures and a single circular hole were carried out by using electro-hydraulic servo universal testing machine to investigate the effect of rock bridge angle β and fissure angle α on mechanical properties and evolution characteristics of cracks.The results show that the peak strength,peak strain and elastic modulus of defected specimens decrease comparing with those for intact sample,and show a decreased trend firstly and then increase with β changing from 0° to 90°.The peak strength and elastic modulus achieve the minimum value as the rock bridge angle is 60°,while the peak strain reaches the minimum value with the rock bridge angle of 45°.The crack initiation of tested rock samples occurs firstly in stress concentration areas at tips of prefabricated fissures under uniaxial compression,and then propagates constantly and coalescences with the prefabricated hole.Some secondary cracks initiate and propagate as well until buckling failure happens.The rock bridge angle has a great influence on crack initiation,coalescence,final failure mode,crack initiation stress and transfixion stress.The peak strength varies significantly,while the elastic modulus and peak strain change slightly,and the failure modes are also different due to the influence of fissure angle.
基金supported by the Fundamental Research Funds for the Central Universities (China University of Mining and Technology) (Grant 2014YC10)the National Basic Research 973 Program of China (Grant 2014CB046905)
文摘Based on experimental restilts of brittle, intact sandstone under uniaxial compression, the micro-parameters were firstly confirmed by adopting particle flow code （PFC2D）. Then, the validation of the simulated models were cross checked with the experimental results of brittle sandstone containing three parallel fissures under uniaxial compression. The simulated results agreed very well with the experimental results, including the peak strength, peak axial strain, and ultimate failure mode. Using the same micro- parameters, the numerical models containing a new geometry of three fissures are constructed to investigate the fissure angle on the fracture mechanical behavior of brittle sandstone under uniaxial compression. The strength and deformation parameters of brittle sandstone containing new three fissures are dependent to the fissure angle. With the increase of the fis- sure angle, the elastic modulus, the crack damage threshold, and the peak strength of brittle sandstone containing three fissures firstly increase and secondly decrease. But the peak axial strain is nonlinearly related to the fissure angle. In the entire process of deformation, the crack initiation and propagation behavior of brittle sandstone containing three fissures under uniaxial compression are investigated with respect to the fissure angle. Six different crack coalescence modes are identified for brittle sandstone containing three fissures under uniaxial compression. The influence of the fissure angle on the length of crack propagation and crack coalescence stress is evaluated. These investigated conclusions are very important for ensuring the stability and safety of rock engineering with intermittent structures.
基金supported by the National Natural Science Foundation of China (Grant 51179189)the National Basic Research 973 Program of China (Grant 2013CB036003)+2 种基金the Program for New Century Excellent Talents in University (Grant NCET-120961)Outstanding Innovation Team Project in China University of Mining and Technology (Grant 2014QN002)the Fundamental Research Funds for the Central Universities (Grants 2014YC10 and 2014XT03)
文摘Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalescence process, a series of uniaxial compression tests were carried out for rock-like material with two unparallel fissures.In the present study, cement, quartz sand, and water were used to fabricate a kind of brittle rock-like material cylindrical model specimen. The mechanical properties of rock-like material specimen used in this research were all in good agreement with the brittle rock materials. Two unparallel fissures（a horizontal fissure and an inclined fissure） were created by inserting steel during molding the model specimen.Then all the pre-fissured rock-like specimens were tested under uniaxial compression by a rock mechanics servocontrolled testing system. The peak strength and Young＇s modulus of pre-fissured specimen all first decreased and then increased when the fissure angle increased from 0？to 75？.In order to investigate the crack initiation, propagation and coalescence process, photographic monitoring was adopted to capture images during the entire deformation process.Moreover, acoustic emission（AE） monitoring technique was also used to obtain the AE evolution characteristic of prefissured specimen. The relationship between axial stress, AE events, and the crack coalescence process was set up： when a new crack was initiated or a crack coalescence occurred, thecorresponding axial stress dropped in the axial stress–time curve and a big AE event could be observed simultaneously.Finally, the mechanism of crack propagation under microscopic observation was discussed. These experimental results are expected to increase the understanding of the strength failure behavior and the cracking mechanism of rock containing unparallel fissures.
基金Project(BK20150005) supported by the Natural Science Foundation of Jiangsu Province for Distinguished Young Scholars,ChinaProject(2014YC10) supported by the Fundamental Research Funds for the Central Universities,China
文摘A series of laboratory experiments and PFC numerical simulations for rock-like material specimens containing two unparallel fissures were carried out.On the basis of experimental and numerical results,the stress-strain curves,mechanical properties,AE events,cracking behavior and energy characteristics were analyzed to reveal the macro-mechanical behavior and meso-mechanism of pre-fissured specimens under different loading rates.Investigated results show that:1)When the loading rate is relatively low,the stress-strain curves show a brittle response.When the loading rate is relatively high,the curve shows a more ductile response.Both of the peak strength and elastic mudulus increase with the increase of loading rate,which can be expressed as power functions.2)Four crack types are identified,i.e.,tensile crack,shear crack,far-field crack and surface spalling.Moreover,the tensile crack,far-field crack and surface spalling are under tensile mechanism,while the shear crack is under shear mechanism.3)The drops of the stress-strain curves all correspond to the crack initiation or coalescence,which is also linked to a sudden increasing in the accumulated micro-crack curve.4)Both of the maximum bond force and energy have the similar trend with the increase of loading rate to peak strength,which indicates that the trend of peak strength can be explained by the meso-mechanics and energy.
基金supported by the China Science National Foundation (No. 41372353)
文摘Shanghai has experienced the greatest land subsidence in China in the past sixty years and produced undesirable environmental impact. However, horizontal ground deformation has not been understood yet. Therefore ground deformation monitoring together with the analysis of its driving forces are critical for geo-hazards early-warning, city planning and sustainable urbanization in Shanghai. In this paper, two-dimensional ground deformation monitoring was performed in Shanghai with SBAS and MSBAS InSAR methods. Twenty-nine Multi-Look Fine 6 （MF6） Radarsat-2 SLC data acquired during 2011-2013 were used to derive vertical ground deformation. Meanwhile, six descending Multi-Look Fine 6 （MF6） and four ascending Multi-Look Fine 2 （MF2） spanning April to August, 2008, were used to derive vertical and horizontal ground deformation during the observation period. The results indicate that vertical and horizontal deformations in 2008 were not homogeneously distributed in different districts ranging from 0-2 cm/year. Vertical deformation rate during 2011-2013 were decreased to less than 1 cm/year in most district of Shanghai area. Activities from groundwater exploitation and rapid urbanization are responsible for most of the ground deformation in Shanghai. Thus, future ground deformation in vertical and horizontal directions should be warranted.
基金supported by 973 ProgramSpecial Item(2010CB428805-1)the National Natural Science Foundation Project(41102138)
文摘Ground fissure hazards frequently emerge in Hebei Plain, which damage roads, dams, buildings and farmland. The paper reviews and analyses current state of knowledge and research into ground fissure and geological environment in Hebei Plain. It is shown that the level of research and investigation is in some aspects insufficient. Knowledge is lacking in the use of corresponding geological concept models for specific ground fissures, three-dimensional numerical simulations of ground fissures caused by pumping through soil with pre-existing fractures, numerical simulations of ground fissures caused by dislocation in intersection faults, and the failure criterion and the constitutive relationship of rock and soil. Furthermore, we put forward geological concept models for ground fissure formation following the dislocation of a buried intersection fault, over-exploitation of groundwater and its compound origin mechanisms in order to provide scientific evidence for the quantitative analysis.
文摘Anorectal complaints are very common and are caused by a variety of mostly benign anorectal disorders.Many anorectal conditions may be successfully treated by primary care physicians in the outpatient setting,but patients tend not to seek medical attention due to embarrassment or fear of cancer.As a result,patients frequently present with advanced disease after experiencing significant decreases in quality of life.A number of patients with anorectal complaints are referred to gastroenterologists.However,gastroenterologists' knowledge and experience in approaching these conditions may not be sufficient.This article can serve as a guide to gastroenterologists to recognize,evaluate,and manage medically or non-surgically common benign anorectal disorders,and to identify when surgical referrals are most prudent.A review of the current literature is performed to evaluate comprehensive clinical pearls and management guidelines for each topic.Topics reviewed include hemorrhoids,anal fissures,anorectal fistulas and abscesses,and pruritus ani.
