The microstructural evolution of pearlite during severe cold rolling in Fe-0.8C binary alloy and Fe-1Mn-0.8C ternary alloys was investigated by using SEM, TEM and XRD etc. The results show that the deformed pearlite c...The microstructural evolution of pearlite during severe cold rolling in Fe-0.8C binary alloy and Fe-1Mn-0.8C ternary alloys was investigated by using SEM, TEM and XRD etc. The results show that the deformed pearlite consists of irregularly bent lamella, coarse lamella with shear-band and fine lamella. As the rolling reduction increases, the proportion of fine lamella increases. The strong plastic deformation, amorphization and dissolution of cementite take place during the severe cold rolling. The maximum carbon content in ferrite reaches 0.15 mass% after 90% cold rolling.展开更多
We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition （CVD） method using a mixture of methane and hydrogen. Based on a...We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition （CVD） method using a mixture of methane and hydrogen. Based on an analysis of the Fe-C phase diagram, a suitable procedure for the successful synthesis of graphene on Fe surfaces was designed. An appropriate temperature and cooling process were found to be very important in the synthesis of highly crystalline few-layer graphene. Graphene-based field-effect transistor （FET） devices were fabricated using the resulting few-layer graphene, and showed good quality with extracted mobilities of 300-1150 cm2/（V.s）.展开更多
α-AlH_(3)is regarded as one of the most promising hydrogen storage materials due to its high hydrogen storage capacity(10.1 wt.%,148 kg·m^(-3)).However,in practical applications,the associated hydrogen release t...α-AlH_(3)is regarded as one of the most promising hydrogen storage materials due to its high hydrogen storage capacity(10.1 wt.%,148 kg·m^(-3)).However,in practical applications,the associated hydrogen release temperature remains relatively high.To effectively address this issue,hollow structured Fe@C nanorods derived from Fe-MOF are introduced as highly efficient catalyst to optimize the dehydrogenation properties ofα-AlH_(3).Comparatively,the initial hydrogen release temperature ofα-AlH_(3)+3 wt.%Fe@C is reduced to 94.2℃,which is significantly lower than that of pureα-AlH_(3)(137.8℃).At 100 and 120℃,it exhibits hydrogen capacities of 5.38 wt.%and 7.47 wt.%,respectively,whereas pureα-AlH_(3)only delivers hydrogen capacities of 0.24 wt.%and 5.94 wt.%under the same temperatures.The density functional theory(DFT)calculations further indicate that the existence of Fe@C catalyst can make the length of Al-H bond increase,which is more conducive to the release of hydrogen.The results show that the synergistic effect of Fe and porous carbon in Fe@C nanorods can improve the hydrogen desorption kinetics ofα-AlH_(3),providing a good prospect for the application ofα-AlH_(3)in hydrogen storage fields.展开更多
Formation of macrosegregation of 5 t steel ingots cast in sand molds with and without water-cooled copper tube is simulated by solving macroscopic mass, momentum, species and energy conservation equations with the con...Formation of macrosegregation of 5 t steel ingots cast in sand molds with and without water-cooled copper tube is simulated by solving macroscopic mass, momentum, species and energy conservation equations with the consideration of shrinkage formation. Predicted macrosegregation pattern of the ingots shows a fair agreement with the experimental data. Both calculations and experiments reveal that some positive segregation patches are formed at the bottom of ingot. With the water-cooled copper tube inserted in the sand mold, the ingot cast has a less intensive macrosegregation. Mechanisms of macrosegregation formation are numerically analyzed. Explanations regarding the influences of fluid flow and temperature change upon the segregation formation are provided.展开更多
Fe-doped amorphous FexCl~ granular films were prepared on n-Si （100） substrates by d.c. magnetron sputtering. The structur- al properties of FexC1-x films were investigated by X-ray diffraction （XRD）, atomic force...Fe-doped amorphous FexCl~ granular films were prepared on n-Si （100） substrates by d.c. magnetron sputtering. The structur- al properties of FexC1-x films were investigated by X-ray diffraction （XRD）, atomic force microscope （AFM） and Raman spec- troscopy. The results show that the iron and carbon of as-deposited films are in amorphous state, and the FexC1-x films are di- amond-like carbon （DLC） films. After doping iron into the DLC films, a smooth surface morphology of the FexC1-x films has been obtained with the surface roughness Ra of about 0.231 nm for x=18at%. The FexC1-x films have good soft magnetic prop- erties with the coercivity of approximately 20 Oe. A high positive magnetoresistance （MR） up to 93% with x=lat% was ob- served in a FexCl-x granular film at 300 K. The resistance characteristic of Fe-C films is changed at about 230 K and the positive MR effect can be understood by the p-n heterojunction theory.展开更多
基金The financial support of the Iron and Alloy Institute of Japan is gratefully acknowledged.One of the authors(Wantang Fu)appreciates the support from the National Natural Science Foundation of China(No.50271061).
文摘The microstructural evolution of pearlite during severe cold rolling in Fe-0.8C binary alloy and Fe-1Mn-0.8C ternary alloys was investigated by using SEM, TEM and XRD etc. The results show that the deformed pearlite consists of irregularly bent lamella, coarse lamella with shear-band and fine lamella. As the rolling reduction increases, the proportion of fine lamella increases. The strong plastic deformation, amorphization and dissolution of cementite take place during the severe cold rolling. The maximum carbon content in ferrite reaches 0.15 mass% after 90% cold rolling.
文摘We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition （CVD） method using a mixture of methane and hydrogen. Based on an analysis of the Fe-C phase diagram, a suitable procedure for the successful synthesis of graphene on Fe surfaces was designed. An appropriate temperature and cooling process were found to be very important in the synthesis of highly crystalline few-layer graphene. Graphene-based field-effect transistor （FET） devices were fabricated using the resulting few-layer graphene, and showed good quality with extracted mobilities of 300-1150 cm2/（V.s）.
基金supported by the Key R&D projects of Jilin Provincial Science and Technology Development Plan(Nos.20230201140GX and 20230201125GX)the National Key Research and Development Program of China(No.2021YFB4000604)+4 种基金the Youth Innovation Promotion Association CAS(No.2022225)the Youth Growth science and technology Plan project of Jilin Province Science and Technology Development Plan(No.20220508001RC)the Independent Research Project of the State Key Laboratory of Rare Earth Resources Utilization(No.110000RL86)the Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,the National Natural Science Foundation of China(No.22103010)the Natural Science Foundation of Shandong Province(No.ZR2021QB104).
文摘α-AlH_(3)is regarded as one of the most promising hydrogen storage materials due to its high hydrogen storage capacity(10.1 wt.%,148 kg·m^(-3)).However,in practical applications,the associated hydrogen release temperature remains relatively high.To effectively address this issue,hollow structured Fe@C nanorods derived from Fe-MOF are introduced as highly efficient catalyst to optimize the dehydrogenation properties ofα-AlH_(3).Comparatively,the initial hydrogen release temperature ofα-AlH_(3)+3 wt.%Fe@C is reduced to 94.2℃,which is significantly lower than that of pureα-AlH_(3)(137.8℃).At 100 and 120℃,it exhibits hydrogen capacities of 5.38 wt.%and 7.47 wt.%,respectively,whereas pureα-AlH_(3)only delivers hydrogen capacities of 0.24 wt.%and 5.94 wt.%under the same temperatures.The density functional theory(DFT)calculations further indicate that the existence of Fe@C catalyst can make the length of Al-H bond increase,which is more conducive to the release of hydrogen.The results show that the synergistic effect of Fe and porous carbon in Fe@C nanorods can improve the hydrogen desorption kinetics ofα-AlH_(3),providing a good prospect for the application ofα-AlH_(3)in hydrogen storage fields.
基金supported by "High-end CNC machine tools and basic manufacturing equipment" Major Science and Technology Project of China(No.2009ZX04014-081)Post-Doctor Project of China (No.20080431162)Young Expert Science Foundation of Harbin University of Science and Technology(No.2008XQJZ005)
文摘Formation of macrosegregation of 5 t steel ingots cast in sand molds with and without water-cooled copper tube is simulated by solving macroscopic mass, momentum, species and energy conservation equations with the consideration of shrinkage formation. Predicted macrosegregation pattern of the ingots shows a fair agreement with the experimental data. Both calculations and experiments reveal that some positive segregation patches are formed at the bottom of ingot. With the water-cooled copper tube inserted in the sand mold, the ingot cast has a less intensive macrosegregation. Mechanisms of macrosegregation formation are numerically analyzed. Explanations regarding the influences of fluid flow and temperature change upon the segregation formation are provided.
基金supported by the National Natural Science Foundation of China (Grant No. U0734001)the Fundamental Research Funds for the Central Universities,SCUT (Grant Nos. 2009ZM0247 and 2012ZZ0015)
文摘Fe-doped amorphous FexCl~ granular films were prepared on n-Si （100） substrates by d.c. magnetron sputtering. The structur- al properties of FexC1-x films were investigated by X-ray diffraction （XRD）, atomic force microscope （AFM） and Raman spec- troscopy. The results show that the iron and carbon of as-deposited films are in amorphous state, and the FexC1-x films are di- amond-like carbon （DLC） films. After doping iron into the DLC films, a smooth surface morphology of the FexC1-x films has been obtained with the surface roughness Ra of about 0.231 nm for x=18at%. The FexC1-x films have good soft magnetic prop- erties with the coercivity of approximately 20 Oe. A high positive magnetoresistance （MR） up to 93% with x=lat% was ob- served in a FexCl-x granular film at 300 K. The resistance characteristic of Fe-C films is changed at about 230 K and the positive MR effect can be understood by the p-n heterojunction theory.
