BACKGROUND There is evolving role of computed tomography coronary angiography(CTCA)in non-invasive evaluation of coronary artery abnormalities in children with Kawasaki disease(KD).Despite this,there is lack of data o...BACKGROUND There is evolving role of computed tomography coronary angiography(CTCA)in non-invasive evaluation of coronary artery abnormalities in children with Kawasaki disease(KD).Despite this,there is lack of data on radiation dose in this group of children undergoing CTCA.AIM To audit the radiation dose of CTCA in children with KD.METHODS Study(December 2013-February 2018)was performed on dual source CT scanner using adaptive prospective electrocardiography-triggering.The dose length product(DLP in milligray-centimeters-mGy.cm)was recorded.Effective radiation dose(millisieverts-mSv)was calculated by applying appropriate age adjusted conversion factors as per recommendations of International Commission on Radiological Protection.Radiation dose was compared across the groups(0-1,1-5,5-10,and>10 years).RESULTS Eighty-five children(71 boys,14 girls)with KD underwent CTCA.The median age was 5 years(range,2 mo-11 years).Median DLP and effective dose was 21 mGy.cm,interquartile ranges(IQR)=15(13,28)and 0.83 mSv,IQR=0.33(0.68,1.01)respectively.Mean DLP increased significantly across the age groups.Mean effective dose in infants(0.63 mSv)was significantly lower than the other age groups(1-5 years 0.85 mSv,5-10 years 1.04 mSv,and>10 years 1.38 mSv)(P<0.05).There was no significant difference in the effective dose between the other groups of children.All the CTCA studies were of diagnostic quality.No child required a repeat examination.CONCLUSION CTCA is feasible with submillisievert radiation dose in most children with KD.Thus,CTCA has the potential to be an important adjunctive imaging modality in children with KD.展开更多
Experimental work has been focused on the formation of alloyed Au-Cu nanoparticles under simultaneous laser exposure and mechanical stirring of mixed monometallic colloids, here referred to as dual procedure. As a fee...Experimental work has been focused on the formation of alloyed Au-Cu nanoparticles under simultaneous laser exposure and mechanical stirring of mixed monometallic colloids, here referred to as dual procedure. As a feed for the dual procedure, Au and Cu monometallic nanoparticle colloids have been using a laser ablation technique. To accomplish this, bulk targets were ablated with 1064 nm wavelength Nd: YAG laser in a pure acetone(99.99%) environment. Ultraviolet-visible optical absorption spectrometry, transmission electron microscopy, X-ray diffraction and X-ray fluorescence technique have been used to characterize the nanoparticles. It has been found that experimental conditions such as stirring and laser parameters strongly affect the synthesized particle properties, including the size, shape, composition and stability of the nanoparticles. Alloy nanoparticles containing 39% Au – 61% Cu have also been prepared in the same process, but in two forms of a homogeneous alloy and a core-shell structure.展开更多
Objectives: Evaluation of radiation efficiency of dual source high-pitch (DSHP) chest CT in comparison to single source technique with special regards to individual patient anatomy. Methods: 150 consecutive patients w...Objectives: Evaluation of radiation efficiency of dual source high-pitch (DSHP) chest CT in comparison to single source technique with special regards to individual patient anatomy. Methods: 150 consecutive patients who underwent chest CT with automated tube current modulation were evaluated retrospectively and divided into three study groups, each with an equal quantity of 50 patients (DSHP vs. single source 128 slices vs. single source 16 slices). By using a dedicated workstation, volumetric analyses of each of the scanned anatomic area were performed and correlated to the individual dose length product (DLP). The calculated result was defined as dose efficiency. Results: DLP was 203 mGycm (DSHP), vs. 269 mGycm (single source) vs. 273 mGycm (16 slice CT). The total patient volume was lowest in the dual source group with 18956.3 cm3 (vs. 22481.2 cm3 vs. 22133.8 cm3). With regards to the DLP, the calculated dose efficiency of dual source CT was better than the 128 slice CT (p = 0.045) and the 16 slice CT (p < 0.01). Conclusions: DSHP CT has considerably better dose efficiency compared to 16 slice CT. Compared to 128 slice single source technique, the high-pitch mode does not cause any dose penalty when performing chest CT.展开更多
Due to the existing limited dynamic range a camera cannot reveal all the details in a high-dynamic range scene. In order to solve this problem,this paper presents a multi-exposure fusion method for getting high qualit...Due to the existing limited dynamic range a camera cannot reveal all the details in a high-dynamic range scene. In order to solve this problem,this paper presents a multi-exposure fusion method for getting high quality images in high dynamic range scene. First,a set of multi-exposure images is obtained by multiple exposures in a same scene and their brightness condition is analyzed. Then,multi-exposure images under the same scene are decomposed using dual-tree complex wavelet transform( DT-CWT),and their low and high frequency components are obtained. Weight maps according to the brightness condition are assigned to the low components for fusion. Maximizing the region Sum Modified-Laplacian( SML) is adopted for high-frequency components fusing. Finally,the fused image is acquired by subjecting the low and high frequency coefficients to inverse DT-CWT.Experimental results show that the proposed approach generates high quality results with uniform distributed brightness and rich details. The proposed method is efficient and robust in varies scenes.展开更多
Two innovative techniques for manufacturing 0.1 micron MOSFETs are described. On e is SiO2-resist overetching method, in which an additional SiO2 layer is use d to short the gate length; the other is dual-exposure met...Two innovative techniques for manufacturing 0.1 micron MOSFETs are described. On e is SiO2-resist overetching method, in which an additional SiO2 layer is use d to short the gate length; the other is dual-exposure method, according to w hich two overlapped masks are exposed in a single lithography. Both of them are easy to implement,without any special processing technologies required.The layou t used in a real process is introduced. As a result, MOSFETs with minimal channe l length of 0.12 micron are obtained. Also, the test results on characteristic a re given. Finally, a conclusion is drawn that in 0.1 micron scale, both saturation currents and transconductorance of MOSFETs increase, while substrate currents de crease when channel length diminish.展开更多
文摘BACKGROUND There is evolving role of computed tomography coronary angiography(CTCA)in non-invasive evaluation of coronary artery abnormalities in children with Kawasaki disease(KD).Despite this,there is lack of data on radiation dose in this group of children undergoing CTCA.AIM To audit the radiation dose of CTCA in children with KD.METHODS Study(December 2013-February 2018)was performed on dual source CT scanner using adaptive prospective electrocardiography-triggering.The dose length product(DLP in milligray-centimeters-mGy.cm)was recorded.Effective radiation dose(millisieverts-mSv)was calculated by applying appropriate age adjusted conversion factors as per recommendations of International Commission on Radiological Protection.Radiation dose was compared across the groups(0-1,1-5,5-10,and>10 years).RESULTS Eighty-five children(71 boys,14 girls)with KD underwent CTCA.The median age was 5 years(range,2 mo-11 years).Median DLP and effective dose was 21 mGy.cm,interquartile ranges(IQR)=15(13,28)and 0.83 mSv,IQR=0.33(0.68,1.01)respectively.Mean DLP increased significantly across the age groups.Mean effective dose in infants(0.63 mSv)was significantly lower than the other age groups(1-5 years 0.85 mSv,5-10 years 1.04 mSv,and>10 years 1.38 mSv)(P<0.05).There was no significant difference in the effective dose between the other groups of children.All the CTCA studies were of diagnostic quality.No child required a repeat examination.CONCLUSION CTCA is feasible with submillisievert radiation dose in most children with KD.Thus,CTCA has the potential to be an important adjunctive imaging modality in children with KD.
基金supported by the Materials and Energy Research Center (MERC),Nanotechnology and Advanced Materials Department in the framework of Project Number 728811
文摘Experimental work has been focused on the formation of alloyed Au-Cu nanoparticles under simultaneous laser exposure and mechanical stirring of mixed monometallic colloids, here referred to as dual procedure. As a feed for the dual procedure, Au and Cu monometallic nanoparticle colloids have been using a laser ablation technique. To accomplish this, bulk targets were ablated with 1064 nm wavelength Nd: YAG laser in a pure acetone(99.99%) environment. Ultraviolet-visible optical absorption spectrometry, transmission electron microscopy, X-ray diffraction and X-ray fluorescence technique have been used to characterize the nanoparticles. It has been found that experimental conditions such as stirring and laser parameters strongly affect the synthesized particle properties, including the size, shape, composition and stability of the nanoparticles. Alloy nanoparticles containing 39% Au – 61% Cu have also been prepared in the same process, but in two forms of a homogeneous alloy and a core-shell structure.
文摘Objectives: Evaluation of radiation efficiency of dual source high-pitch (DSHP) chest CT in comparison to single source technique with special regards to individual patient anatomy. Methods: 150 consecutive patients who underwent chest CT with automated tube current modulation were evaluated retrospectively and divided into three study groups, each with an equal quantity of 50 patients (DSHP vs. single source 128 slices vs. single source 16 slices). By using a dedicated workstation, volumetric analyses of each of the scanned anatomic area were performed and correlated to the individual dose length product (DLP). The calculated result was defined as dose efficiency. Results: DLP was 203 mGycm (DSHP), vs. 269 mGycm (single source) vs. 273 mGycm (16 slice CT). The total patient volume was lowest in the dual source group with 18956.3 cm3 (vs. 22481.2 cm3 vs. 22133.8 cm3). With regards to the DLP, the calculated dose efficiency of dual source CT was better than the 128 slice CT (p = 0.045) and the 16 slice CT (p < 0.01). Conclusions: DSHP CT has considerably better dose efficiency compared to 16 slice CT. Compared to 128 slice single source technique, the high-pitch mode does not cause any dose penalty when performing chest CT.
基金Supported by the National Natural Science Foundation of China(No.61308099,61304032)
文摘Due to the existing limited dynamic range a camera cannot reveal all the details in a high-dynamic range scene. In order to solve this problem,this paper presents a multi-exposure fusion method for getting high quality images in high dynamic range scene. First,a set of multi-exposure images is obtained by multiple exposures in a same scene and their brightness condition is analyzed. Then,multi-exposure images under the same scene are decomposed using dual-tree complex wavelet transform( DT-CWT),and their low and high frequency components are obtained. Weight maps according to the brightness condition are assigned to the low components for fusion. Maximizing the region Sum Modified-Laplacian( SML) is adopted for high-frequency components fusing. Finally,the fused image is acquired by subjecting the low and high frequency coefficients to inverse DT-CWT.Experimental results show that the proposed approach generates high quality results with uniform distributed brightness and rich details. The proposed method is efficient and robust in varies scenes.
文摘Two innovative techniques for manufacturing 0.1 micron MOSFETs are described. On e is SiO2-resist overetching method, in which an additional SiO2 layer is use d to short the gate length; the other is dual-exposure method, according to w hich two overlapped masks are exposed in a single lithography. Both of them are easy to implement,without any special processing technologies required.The layou t used in a real process is introduced. As a result, MOSFETs with minimal channe l length of 0.12 micron are obtained. Also, the test results on characteristic a re given. Finally, a conclusion is drawn that in 0.1 micron scale, both saturation currents and transconductorance of MOSFETs increase, while substrate currents de crease when channel length diminish.
