Aerosol indirect effects on warm clouds are estimated in the Grid-point Atmospheric Model of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics,Institute of Atmosphe...Aerosol indirect effects on warm clouds are estimated in the Grid-point Atmospheric Model of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics,Institute of Atmospheric Physics(IAP LASG)(GAMIL) with a new two-moment cloud microphysics scheme using two different physically-based aerosol activation parameterizations:Abdul-Razzak and Ghan,and Nenes and Seinfeld.The annual global mean changes in shortwave cloud forcing from preindustrial times to present day(a measure of the aerosol indirect effects) estimated from these two parameterizations are remarkably similar:0.76 W m?2 with the Abdul-Razzak and Ghan parameterization,and 0.78 W m?2 with the Nenes and Seinfeld parameterization.Physically-based parameterizations can provide robust representations of aerosol effects on droplet nucleation,meaning that aerosol activation is no longer the most uncertain factor in modeling aerosol indirect effects.展开更多
利用液滴外延法在GaAs(001)衬底表面制备InAs量子点,通过控制变量分别研究沉积速率、沉积量对In液滴在GaAs表面生长过程中的影响.使用原子力显微镜(Atomic Force Microscope,AFM)表征I⁃nAs纳米结构形貌,得出结论:(1)沉积速率主要通过影...利用液滴外延法在GaAs(001)衬底表面制备InAs量子点,通过控制变量分别研究沉积速率、沉积量对In液滴在GaAs表面生长过程中的影响.使用原子力显微镜(Atomic Force Microscope,AFM)表征I⁃nAs纳米结构形貌,得出结论:(1)沉积速率主要通过影响In液滴成核率来控制液滴的密度,即随着沉积速率的增大,In原子在衬底表面的成核率增加,InAs量子点密度增加,实验符合生长动力学经典成核理论.(2)沉积量的改变主要影响液滴的熟化过程,即随着沉积量的增大,可参与生长的活跃的In原子增加,促进了液滴熟化,使得扩散坍塌的原子数量增加,导致在InAs纳米结构中出现多量子点现象.展开更多
The drying of aqueous poly（ethylene oxide） （PEO） droplet on a substrate at different temperatures was studied. It was found that the contact line receded when the substrate was at a temperature above 60 ℃. Differ...The drying of aqueous poly（ethylene oxide） （PEO） droplet on a substrate at different temperatures was studied. It was found that the contact line receded when the substrate was at a temperature above 60 ℃. Different nucleation behavior and surface profiles of PEO films were found in different droplets drying processes. The rheological properties of aqueous PEO solutions were studied to understand the mechanism of contact line recession and micro-flow in drying aqueous PEO droplets. It was found that at low temperature, the contact line was static because of great viscous stress; while at high temperature, it receded because of great Marangoni force and the decrease of viscous stress. It was indicated that Marangoni convection was inhibited by the outward capillary flow and viscous stress at low temperature, whereas it became dominant at high temperature. Two types of mechanism for surface profiles and nucleation of PEO film from drying droplets are proposed, providing a theoretical guide for polymer solution application in oil and gas foam flooding technology.展开更多
Liquid vaporization under thermodynamic phase non-equilibrium condition at the gas-liquid interface is investigated over a wide range of fluid state typical of many liquid-fueled energy conversion systems. The validit...Liquid vaporization under thermodynamic phase non-equilibrium condition at the gas-liquid interface is investigated over a wide range of fluid state typical of many liquid-fueled energy conversion systems. The validity of the phase-equilibrium assumption commonly used in the existing study of liquid vaporization is examined using molecular dynamics theories. The interfacial mass flow rates on both sides of the liquid surface are compared to the net vaporization rate through an order-of-magnitude analysis.Results indicated that the phase-equilibrium assumption holds valid at relatively high pressures and low temperatures,and for droplets with relatively large initial diameters(for example,larger than 10 μm for vaporizing oxygen droplets in gaseous hydrogen in the pressure range from 10 atm to the oxygen critical state). Droplet vaporization under superheated conditions is also explored using classical binary homogeneous nucleation theory,in conjunction with a real-fluid equation of state. It is found that the bubble nucleation rate is very sensitive to changes in saturation ratio and pressure;it increases by several orders of magnitude when either the saturation ratio or the pressure is slightly increased. The kinetic limit of saturation ratio decreases with increasing pressure,leading to reduced difference between saturation and superheat conditions. As a result,the influence of nonequilibrium conditions on droplet vaporization is lower at a higher pressure.展开更多
液滴外延技术不仅适用于晶格失配,也适用于晶格匹配材料系统,且易于制备低维半导体结构,如低密度量子点、环等.本文研究了液滴外延法在GaAs表面进行不同Al、Ga组分的量子点生长.在实验中用反射式高能电子衍射仪(Reflection High Energy ...液滴外延技术不仅适用于晶格失配,也适用于晶格匹配材料系统,且易于制备低维半导体结构,如低密度量子点、环等.本文研究了液滴外延法在GaAs表面进行不同Al、Ga组分的量子点生长.在实验中用反射式高能电子衍射仪(Reflection High Energy Electron Diffraction, RHEED)对样品进行原位监控.通过控制Al、Ga液滴的沉积速率来控制液滴同时沉积在衬底上形成的组分.研究发现,随着Al组分的增加,量子点逐渐变得密集,润湿角变低.在Al组分增高超过0.5之后,出现了大小不一的量子点,且量子点密度出现指数型增长.对此进行研究分析,给出了一个经验公式,并就现象进行了解释.展开更多
The preparation and solidification of metallic droplets attract more and more attention for their signiifcance in both engineering and scientiifc ifelds. In this paper, the preparation and characterization of Sn-based...The preparation and solidification of metallic droplets attract more and more attention for their signiifcance in both engineering and scientiifc ifelds. In this paper, the preparation and characterization of Sn-based al oy droplets using different methods such as atomization and consumable electrode direct current arc （CDCA） technique are reviewed. The morphology and structure of these droplets were determined by optical microscopy, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The solidiifcation behavior of single droplet was systematical y studied by means of scanning calorimetry （DSC）, and the nucleation kinetics was also calculated. In particular, the development of fast scanning calorimetry （FSC） made it possible to investigate the evolution of undercooling under ultrafast but control able heating and cooling conditions. The combination of CDCA technique and FSC measurements opens up a new door for quantitative studies on droplet solidiifcation, which is accessible to demonstrate some theories by experiments.展开更多
基金supported by the National High Technology Research and Development Program of China (Grant No. 2010AA012304)the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant No. KZCX2-YW-Q11-04)the China Meteorological Administration for the R&D Special Fund for Public Welfare Industry (meteorology) (Grant Nos. GYHY200806006 and GYHY200906020)
文摘Aerosol indirect effects on warm clouds are estimated in the Grid-point Atmospheric Model of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics,Institute of Atmospheric Physics(IAP LASG)(GAMIL) with a new two-moment cloud microphysics scheme using two different physically-based aerosol activation parameterizations:Abdul-Razzak and Ghan,and Nenes and Seinfeld.The annual global mean changes in shortwave cloud forcing from preindustrial times to present day(a measure of the aerosol indirect effects) estimated from these two parameterizations are remarkably similar:0.76 W m?2 with the Abdul-Razzak and Ghan parameterization,and 0.78 W m?2 with the Nenes and Seinfeld parameterization.Physically-based parameterizations can provide robust representations of aerosol effects on droplet nucleation,meaning that aerosol activation is no longer the most uncertain factor in modeling aerosol indirect effects.
文摘利用液滴外延法在GaAs(001)衬底表面制备InAs量子点,通过控制变量分别研究沉积速率、沉积量对In液滴在GaAs表面生长过程中的影响.使用原子力显微镜(Atomic Force Microscope,AFM)表征I⁃nAs纳米结构形貌,得出结论:(1)沉积速率主要通过影响In液滴成核率来控制液滴的密度,即随着沉积速率的增大,In原子在衬底表面的成核率增加,InAs量子点密度增加,实验符合生长动力学经典成核理论.(2)沉积量的改变主要影响液滴的熟化过程,即随着沉积量的增大,可参与生长的活跃的In原子增加,促进了液滴熟化,使得扩散坍塌的原子数量增加,导致在InAs纳米结构中出现多量子点现象.
文摘The drying of aqueous poly（ethylene oxide） （PEO） droplet on a substrate at different temperatures was studied. It was found that the contact line receded when the substrate was at a temperature above 60 ℃. Different nucleation behavior and surface profiles of PEO films were found in different droplets drying processes. The rheological properties of aqueous PEO solutions were studied to understand the mechanism of contact line recession and micro-flow in drying aqueous PEO droplets. It was found that at low temperature, the contact line was static because of great viscous stress; while at high temperature, it receded because of great Marangoni force and the decrease of viscous stress. It was indicated that Marangoni convection was inhibited by the outward capillary flow and viscous stress at low temperature, whereas it became dominant at high temperature. Two types of mechanism for surface profiles and nucleation of PEO film from drying droplets are proposed, providing a theoretical guide for polymer solution application in oil and gas foam flooding technology.
文摘Liquid vaporization under thermodynamic phase non-equilibrium condition at the gas-liquid interface is investigated over a wide range of fluid state typical of many liquid-fueled energy conversion systems. The validity of the phase-equilibrium assumption commonly used in the existing study of liquid vaporization is examined using molecular dynamics theories. The interfacial mass flow rates on both sides of the liquid surface are compared to the net vaporization rate through an order-of-magnitude analysis.Results indicated that the phase-equilibrium assumption holds valid at relatively high pressures and low temperatures,and for droplets with relatively large initial diameters(for example,larger than 10 μm for vaporizing oxygen droplets in gaseous hydrogen in the pressure range from 10 atm to the oxygen critical state). Droplet vaporization under superheated conditions is also explored using classical binary homogeneous nucleation theory,in conjunction with a real-fluid equation of state. It is found that the bubble nucleation rate is very sensitive to changes in saturation ratio and pressure;it increases by several orders of magnitude when either the saturation ratio or the pressure is slightly increased. The kinetic limit of saturation ratio decreases with increasing pressure,leading to reduced difference between saturation and superheat conditions. As a result,the influence of nonequilibrium conditions on droplet vaporization is lower at a higher pressure.
文摘液滴外延技术不仅适用于晶格失配,也适用于晶格匹配材料系统,且易于制备低维半导体结构,如低密度量子点、环等.本文研究了液滴外延法在GaAs表面进行不同Al、Ga组分的量子点生长.在实验中用反射式高能电子衍射仪(Reflection High Energy Electron Diffraction, RHEED)对样品进行原位监控.通过控制Al、Ga液滴的沉积速率来控制液滴同时沉积在衬底上形成的组分.研究发现,随着Al组分的增加,量子点逐渐变得密集,润湿角变低.在Al组分增高超过0.5之后,出现了大小不一的量子点,且量子点密度出现指数型增长.对此进行研究分析,给出了一个经验公式,并就现象进行了解释.
基金supported by the National Natural Science Foundation of China(Grant Nos.51171105 and 50971086)the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learningthe 085 project in Shanghai University
文摘The preparation and solidification of metallic droplets attract more and more attention for their signiifcance in both engineering and scientiifc ifelds. In this paper, the preparation and characterization of Sn-based al oy droplets using different methods such as atomization and consumable electrode direct current arc （CDCA） technique are reviewed. The morphology and structure of these droplets were determined by optical microscopy, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The solidiifcation behavior of single droplet was systematical y studied by means of scanning calorimetry （DSC）, and the nucleation kinetics was also calculated. In particular, the development of fast scanning calorimetry （FSC） made it possible to investigate the evolution of undercooling under ultrafast but control able heating and cooling conditions. The combination of CDCA technique and FSC measurements opens up a new door for quantitative studies on droplet solidiifcation, which is accessible to demonstrate some theories by experiments.
