Optical and visual measurement technology is used widely in fields that involve geometric measurements,and among such technology are laser and vision-based displacement measuring modules(LVDMMs).The displacement trans...Optical and visual measurement technology is used widely in fields that involve geometric measurements,and among such technology are laser and vision-based displacement measuring modules(LVDMMs).The displacement transformation coefficient(DTC)of an LVDMM changes with the coordinates in the camera image coordinate system during the displacement measuring process,and these changes affect the displacement measurement accuracy of LVDMMs in the full field of view(FFOV).To give LVDMMs higher accuracy in the FFOV and make them adaptable to widely varying measurement demands,a new calibration method is proposed to improve the displacement measurement accuracy of LVDMMs in the FFOV.First,an image coordinate system,a pixel measurement coordinate system,and a displacement measurement coordinate system are established on the laser receiving screen of the LVDMM.In addition,marker spots in the FFOV are selected,and the DTCs at the marker spots are obtained from calibration experiments.Also,a fitting method based on locally weighted scatterplot smoothing(LOWESS)is selected,and with this fitting method the distribution functions of the DTCs in the FFOV are obtained based on the DTCs at the marker spots.Finally,the calibrated distribution functions of the DTCs are applied to the LVDMM,and experiments conducted to verify the displacement measurement accuracies are reported.The results show that the FFOV measurement accuracies for horizontal and vertical displacements are better than±15μm and±19μm,respectively,and that for oblique displacement is better than±24μm.Compared with the traditional calibration method,the displacement measurement error in the FFOV is now 90%smaller.This research on an improved calibration method has certain significance for improving the measurement accuracy of LVDMMs in the FFOV,and it provides a new method and idea for other vision-based fields in which camera parameters must be calibrated.展开更多
As one of the typical less-mobility parallel mechanisms, the spherical parallel mechanism Up.s with two degrees of freedom （2-DOF） possess high order overconstraints, and the calculation of its stiffness is partly d...As one of the typical less-mobility parallel mechanisms, the spherical parallel mechanism Up.s with two degrees of freedom （2-DOF） possess high order overconstraints, and the calculation of its stiffness is partly different with general parallel mechanisms owing to the bars in each branch are assumed to be arc-shaped. By means of small deformation superposition principle, the relationship between the angle displacement and line displacement of moving platform and the forces acted on the branches were derived out. Based on the results of static analysis, the relationship between the applied force, the line displacement and the angle displacement of the mechanism was set up. And then the stiffness matrix was obtained. The six principal stiffness of the mechanism and the corresponding directions were achieved by the orthogonal transformation. The numerical calculation was performed and the results showed that the principal stiffness and directions are varied with the pose-position of the mechanism, and the principal stiffness is gradually enlarged when it is far away from the anigin. In addition, the torsion stiffness is much greater and the line deformation stiffness is smaller, the difference between the two parts is huge. The research content of this paper supplies the theoretical foundation for the further engineering design and application of the spherical parallel mechanism.展开更多
基金supported financially by the National Natural Science Foundation of China (NSFC) (Grant No.51775378)the Key Projects in Tianjin Science&Technology Support Program (Grant No.19YFZC GX00890).
文摘Optical and visual measurement technology is used widely in fields that involve geometric measurements,and among such technology are laser and vision-based displacement measuring modules(LVDMMs).The displacement transformation coefficient(DTC)of an LVDMM changes with the coordinates in the camera image coordinate system during the displacement measuring process,and these changes affect the displacement measurement accuracy of LVDMMs in the full field of view(FFOV).To give LVDMMs higher accuracy in the FFOV and make them adaptable to widely varying measurement demands,a new calibration method is proposed to improve the displacement measurement accuracy of LVDMMs in the FFOV.First,an image coordinate system,a pixel measurement coordinate system,and a displacement measurement coordinate system are established on the laser receiving screen of the LVDMM.In addition,marker spots in the FFOV are selected,and the DTCs at the marker spots are obtained from calibration experiments.Also,a fitting method based on locally weighted scatterplot smoothing(LOWESS)is selected,and with this fitting method the distribution functions of the DTCs in the FFOV are obtained based on the DTCs at the marker spots.Finally,the calibrated distribution functions of the DTCs are applied to the LVDMM,and experiments conducted to verify the displacement measurement accuracies are reported.The results show that the FFOV measurement accuracies for horizontal and vertical displacements are better than±15μm and±19μm,respectively,and that for oblique displacement is better than±24μm.Compared with the traditional calibration method,the displacement measurement error in the FFOV is now 90%smaller.This research on an improved calibration method has certain significance for improving the measurement accuracy of LVDMMs in the FFOV,and it provides a new method and idea for other vision-based fields in which camera parameters must be calibrated.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51275443 and 51005195)Key Project of Chinese Ministry of Education(Grant No.212012)+1 种基金Research Fund for the Doctoral Program of Higher Education of China(Grant No.20111333120004)Natural Science Foundationof Hebei Province(Grant No.E2012203034)
文摘As one of the typical less-mobility parallel mechanisms, the spherical parallel mechanism Up.s with two degrees of freedom （2-DOF） possess high order overconstraints, and the calculation of its stiffness is partly different with general parallel mechanisms owing to the bars in each branch are assumed to be arc-shaped. By means of small deformation superposition principle, the relationship between the angle displacement and line displacement of moving platform and the forces acted on the branches were derived out. Based on the results of static analysis, the relationship between the applied force, the line displacement and the angle displacement of the mechanism was set up. And then the stiffness matrix was obtained. The six principal stiffness of the mechanism and the corresponding directions were achieved by the orthogonal transformation. The numerical calculation was performed and the results showed that the principal stiffness and directions are varied with the pose-position of the mechanism, and the principal stiffness is gradually enlarged when it is far away from the anigin. In addition, the torsion stiffness is much greater and the line deformation stiffness is smaller, the difference between the two parts is huge. The research content of this paper supplies the theoretical foundation for the further engineering design and application of the spherical parallel mechanism.
