In order to improve ingot structure and to refine grain size of Cu Al Ni shape memory alloys by means of electropulse modification, the effect of voltage, frequency and time of the pulse as well as the type of cooling...In order to improve ingot structure and to refine grain size of Cu Al Ni shape memory alloys by means of electropulse modification, the effect of voltage, frequency and time of the pulse as well as the type of cooling mold on the macrostructure of ingot have been systematically studied. The results show that the above four parameters are important influencing factors on the ingot macrostructure. By appropriately adjusting the parameters, the macrostructure of polycrystalline Cu Al Ni ingot can be significantly improved and nearly fully equiaxied region of the ingot is obtained; the corresponding grain size of the ingot can be dramatically reduced to less than 1/20 of that of unmodified.展开更多
The influences of 2.5wt%Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy（SMA） were studied by means of scanning electron microscopy（SEM）,transmission elec...The influences of 2.5wt%Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy（SMA） were studied by means of scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,and differential scanning calorimeter（DSC）.The experimental results show that Mn addition influences considerably the austenite-martensite transformation temperatures and the kind of martensite in the Cu-Al-Ni alloy.The martensitic transformation changes from a mixedβ1→β＇1＋γ＇1 transformation to a singleβ1→β＇1 martensite transformation together with a decrease in transformation temperatures.In addition,the observations reveal that the grain size of the Cu-Al-Ni alloy can be controlled with the addition of 2.5wt%Mn and thus its mechanical properties can be enhanced.The Cu-Al-Ni-Mn alloy exhibits better mechanical properties with the high ultimate compression strength and ductility of 952 MPa and 15%,respectively.These improvements are attributed to a decrease in grain size.However,the hardness decreases from Hv 230 to Hv 140 with the Mn addition.展开更多
The research of new materials on the basis of memory shape today occupies the special attention of researchers in various industrial fields,such as medicine,traffic,robotics,etc.This paper analyzes the possibility of ...The research of new materials on the basis of memory shape today occupies the special attention of researchers in various industrial fields,such as medicine,traffic,robotics,etc.This paper analyzes the possibility of applying SMAs(shape memory alloys)in the maritime industry in terms of monitoring the behavior of SMAs in different marine environments.The subject of the research is Cu-Al-Ni and Ni-Ti CC alloys processed by CC(continuous casting)in the shape of bars and Ni-Ti as cast processed by casting in the shape of disk.Using the method of EDX(energy dispersion X-ray spectrophotometry),the chemical composition of alloy elements in zones such as in the air,on the surface of the sea and in the sea was determined after six and twelve months of exposure.By applying the theory of reliability,an assessment of the reliability of the alloy elements was obtained.According to the obtained results of the Cu-Al-Ni alloy,nickel is the most reliable in the sea.Aluminum is the least reliable in the sea.The Ni-Ti CC alloy in the marine environment is more reliable than the Ni-Ti as cast alloy.Based on the changes in the chemical composition of alloys in all three considered zones,it is concluded that all three alloys have the lowest reliability in the sea and the highest in the air.展开更多
The effects of different contents(0.4%, 0.7%, and 1.0%, mass fraction) of Mn or Ti additions on the micro structure, shape memory effect and the corrosion behaviour of Cu-Al-Ni shape memory alloys were studied by fiel...The effects of different contents(0.4%, 0.7%, and 1.0%, mass fraction) of Mn or Ti additions on the micro structure, shape memory effect and the corrosion behaviour of Cu-Al-Ni shape memory alloys were studied by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, differential scanning calorimetry and electrochemical and immersion tests in NaCl solution. It was observed that the microstructure, shape memory effect and corrosion characteristics are highly sensitive to the composition variations. It was found that the highest strain recovery was with 0.7% addition of Mn or Ti. This may be attributed to the presence of precipitation with a high volume fraction and the grain refinement. The electrochemical test showed that the formation of oxide layers in both Cu-Al-Ni-Mn and Cu-Al-Ni-Ti shape memory alloys(SMAs) provided good passivation which enhanced the corrosion resistance of the alloys. Immersion test showed that in Cu-Al-Ni-Mn SMAs, pitting corrosion occurred through feebleness in the oxide layer. A corrosion product adjacent to the pits was rich in Al/Mn oxide and depleted in Cu while inside of the pit it was rich in Cu. In Cu-Al-Ni-Ti SMAs, localized corrosion occurred on the surface of the specimens and dealuminization attack was also observed in the matrix.展开更多
Various training methods for two way memory effect (TWME) and stressed two way memory effect (STWME) were tried on Cu 13.4Al 4.0Ni (mass fraction, %) single crystals by applying tensile stress along 〈001〉 direction ...Various training methods for two way memory effect (TWME) and stressed two way memory effect (STWME) were tried on Cu 13.4Al 4.0Ni (mass fraction, %) single crystals by applying tensile stress along 〈001〉 direction of β phase. The training method of cooling with load can induce a lot of martensite prone to stabilize, thus cause large residual deformation, wide hysteresis and small TWME. Training with constant load can produce STWME larger than 8% with the least residual deformation. By training procedure of martensite reorientation below M f followed by thermal cycling, the TWME is relatively large with very small residual deformation and with comparatively narrow hysteresis of two way memory. The obtained two way memory curve after such training is not a closed loop, and the obtained TWME is not stable. However, these can be improved by thermal cycling. Training with martensite reorientation below M f and thermal cycling under relatively low constant stress throughout the whole training procedure is the optimum way of obtaining TWME, and more than 1.7% TWME can be obtained. The thermomechanical history of the sample has a pronounced effect on the training result. Thermomechanical cycling has a softening effect on martensite. [展开更多
The microstructure and properties of nanostructured Cu-13.2Al-5.1Ni shape memory alloy （SMA） were compared with those of initial coarse structure. The nanostructured Cu-Al-Ni ribbons were produced via rapid solidifi...The microstructure and properties of nanostructured Cu-13.2Al-5.1Ni shape memory alloy （SMA） were compared with those of initial coarse structure. The nanostructured Cu-Al-Ni ribbons were produced via rapid solidification using melt spinning technique. The structure and properties of both nanostructured and coarse-grain specimens were then characterized using XRD, SEM, AFM and DSC techniques. According to the obtained results, the nanostructured ribbons show one way shape memory effect. Besides, the formation of nanoparticles of γ2 （Cu9Al4） and the nanograins results in a significant decrease in the martensite-austenite transformation temperature. The produced nanostructure not only leads to a considerable increase in the recovered deformation but also results in the structure stability when it is subjected to deformation-recovery cycles.展开更多
The preparation of large-scale Cu-Al-Ni shape memory alloys with excellent microstructure and texture is a significant challenge in this field.In this study,large-scale Cu-Al-Ni shape memory alloy(SMA)slabs with good ...The preparation of large-scale Cu-Al-Ni shape memory alloys with excellent microstructure and texture is a significant challenge in this field.In this study,large-scale Cu-Al-Ni shape memory alloy(SMA)slabs with good surface quality and strong orientation were prepared by the horizontal continuous casting(HCC).The microstructure and mechanical properties were compared with the ordinary casting(OC)Cu-Al-Ni alloy.The results showed that the microstructure of OC Cu-Al-Ni alloy was equiaxed grains with randomly orientation,which had no obvious superelasticity.The alloys producedby Hcchad herringbone grains withstrong orientation near(100)and the cumulative tensile superelasticity of 4.58%.The superelasticity of the alloy produced by HCC has been improved by 4-5 times.This work has preliminarily realized the production of large-scale Cu-Al-Ni SMA slab with good superelasticity,which lays a foundation forexpanding the industrial production and application of Cu-based SMAs.展开更多
文摘In order to improve ingot structure and to refine grain size of Cu Al Ni shape memory alloys by means of electropulse modification, the effect of voltage, frequency and time of the pulse as well as the type of cooling mold on the macrostructure of ingot have been systematically studied. The results show that the above four parameters are important influencing factors on the ingot macrostructure. By appropriately adjusting the parameters, the macrostructure of polycrystalline Cu Al Ni ingot can be significantly improved and nearly fully equiaxied region of the ingot is obtained; the corresponding grain size of the ingot can be dramatically reduced to less than 1/20 of that of unmodified.
文摘The influences of 2.5wt%Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy（SMA） were studied by means of scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,and differential scanning calorimeter（DSC）.The experimental results show that Mn addition influences considerably the austenite-martensite transformation temperatures and the kind of martensite in the Cu-Al-Ni alloy.The martensitic transformation changes from a mixedβ1→β＇1＋γ＇1 transformation to a singleβ1→β＇1 martensite transformation together with a decrease in transformation temperatures.In addition,the observations reveal that the grain size of the Cu-Al-Ni alloy can be controlled with the addition of 2.5wt%Mn and thus its mechanical properties can be enhanced.The Cu-Al-Ni-Mn alloy exhibits better mechanical properties with the high ultimate compression strength and ductility of 952 MPa and 15%,respectively.These improvements are attributed to a decrease in grain size.However,the hardness decreases from Hv 230 to Hv 140 with the Mn addition.
文摘The research of new materials on the basis of memory shape today occupies the special attention of researchers in various industrial fields,such as medicine,traffic,robotics,etc.This paper analyzes the possibility of applying SMAs(shape memory alloys)in the maritime industry in terms of monitoring the behavior of SMAs in different marine environments.The subject of the research is Cu-Al-Ni and Ni-Ti CC alloys processed by CC(continuous casting)in the shape of bars and Ni-Ti as cast processed by casting in the shape of disk.Using the method of EDX(energy dispersion X-ray spectrophotometry),the chemical composition of alloy elements in zones such as in the air,on the surface of the sea and in the sea was determined after six and twelve months of exposure.By applying the theory of reliability,an assessment of the reliability of the alloy elements was obtained.According to the obtained results of the Cu-Al-Ni alloy,nickel is the most reliable in the sea.Aluminum is the least reliable in the sea.The Ni-Ti CC alloy in the marine environment is more reliable than the Ni-Ti as cast alloy.Based on the changes in the chemical composition of alloys in all three considered zones,it is concluded that all three alloys have the lowest reliability in the sea and the highest in the air.
基金the Malaysian Ministry of Higher Education (MOHE) and Universiti Teknologi Malaysia for providing the financial support and facilities for this research, under Grant No. R.J130000.7824.4F150
文摘The effects of different contents(0.4%, 0.7%, and 1.0%, mass fraction) of Mn or Ti additions on the micro structure, shape memory effect and the corrosion behaviour of Cu-Al-Ni shape memory alloys were studied by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, differential scanning calorimetry and electrochemical and immersion tests in NaCl solution. It was observed that the microstructure, shape memory effect and corrosion characteristics are highly sensitive to the composition variations. It was found that the highest strain recovery was with 0.7% addition of Mn or Ti. This may be attributed to the presence of precipitation with a high volume fraction and the grain refinement. The electrochemical test showed that the formation of oxide layers in both Cu-Al-Ni-Mn and Cu-Al-Ni-Ti shape memory alloys(SMAs) provided good passivation which enhanced the corrosion resistance of the alloys. Immersion test showed that in Cu-Al-Ni-Mn SMAs, pitting corrosion occurred through feebleness in the oxide layer. A corrosion product adjacent to the pits was rich in Al/Mn oxide and depleted in Cu while inside of the pit it was rich in Cu. In Cu-Al-Ni-Ti SMAs, localized corrosion occurred on the surface of the specimens and dealuminization attack was also observed in the matrix.
文摘Various training methods for two way memory effect (TWME) and stressed two way memory effect (STWME) were tried on Cu 13.4Al 4.0Ni (mass fraction, %) single crystals by applying tensile stress along 〈001〉 direction of β phase. The training method of cooling with load can induce a lot of martensite prone to stabilize, thus cause large residual deformation, wide hysteresis and small TWME. Training with constant load can produce STWME larger than 8% with the least residual deformation. By training procedure of martensite reorientation below M f followed by thermal cycling, the TWME is relatively large with very small residual deformation and with comparatively narrow hysteresis of two way memory. The obtained two way memory curve after such training is not a closed loop, and the obtained TWME is not stable. However, these can be improved by thermal cycling. Training with martensite reorientation below M f and thermal cycling under relatively low constant stress throughout the whole training procedure is the optimum way of obtaining TWME, and more than 1.7% TWME can be obtained. The thermomechanical history of the sample has a pronounced effect on the training result. Thermomechanical cycling has a softening effect on martensite. [
文摘The microstructure and properties of nanostructured Cu-13.2Al-5.1Ni shape memory alloy （SMA） were compared with those of initial coarse structure. The nanostructured Cu-Al-Ni ribbons were produced via rapid solidification using melt spinning technique. The structure and properties of both nanostructured and coarse-grain specimens were then characterized using XRD, SEM, AFM and DSC techniques. According to the obtained results, the nanostructured ribbons show one way shape memory effect. Besides, the formation of nanoparticles of γ2 （Cu9Al4） and the nanograins results in a significant decrease in the martensite-austenite transformation temperature. The produced nanostructure not only leads to a considerable increase in the recovered deformation but also results in the structure stability when it is subjected to deformation-recovery cycles.
基金supported by the National Natural Science Foundation of China(Grant No.51974028)the Fundamental Research Funds for the Central Universities(Grant No.2021JCCXJD01)+1 种基金the Key R&D and Transformation Projects in Qinghai Province(Grant No.2021-HZ-808)Hebei Province(Grant No.21314401D).
文摘The preparation of large-scale Cu-Al-Ni shape memory alloys with excellent microstructure and texture is a significant challenge in this field.In this study,large-scale Cu-Al-Ni shape memory alloy(SMA)slabs with good surface quality and strong orientation were prepared by the horizontal continuous casting(HCC).The microstructure and mechanical properties were compared with the ordinary casting(OC)Cu-Al-Ni alloy.The results showed that the microstructure of OC Cu-Al-Ni alloy was equiaxed grains with randomly orientation,which had no obvious superelasticity.The alloys producedby Hcchad herringbone grains withstrong orientation near(100)and the cumulative tensile superelasticity of 4.58%.The superelasticity of the alloy produced by HCC has been improved by 4-5 times.This work has preliminarily realized the production of large-scale Cu-Al-Ni SMA slab with good superelasticity,which lays a foundation forexpanding the industrial production and application of Cu-based SMAs.
