L2 reading is not only an important channel for people to obtain information and knowledge,but also the main way for people to learn a foreign language.Reading information processing can be divided into controlled pro...L2 reading is not only an important channel for people to obtain information and knowledge,but also the main way for people to learn a foreign language.Reading information processing can be divided into controlled processing and automatic processing.Controlled information processing is a conscious and resource-intensive processing model,while automatic information processing is an unconscious and automatic processing model.This study investigates the characteristics and interactivity of controlled and automatic information processing in L2 reading,and explores the roles of controlled and automatic information processing strategies in improving L2 reading ability.The findings are as follows:(a)controlled and automatic information processing is interactive in L2 reading;and(b)the uses of controlled and automatic information processing strategies are beneficial to the improvement of the reading ability of L2 learners.This study has important theoretical and practical value in improving the efficiency of L2 reading teaching and learning.展开更多
The present article aims at elucidating the effect of thermo-mechanical controlled processing(TMCP), especially the finish cooling temperature, on microstructure and mechanical properties of high strength low alloy st...The present article aims at elucidating the effect of thermo-mechanical controlled processing(TMCP), especially the finish cooling temperature, on microstructure and mechanical properties of high strength low alloy steels for developing superior low temperature toughness construction steel. The microstructural features were characterized by scanning electron microscope equipped with electron backscatter diffraction, and the mechanical behaviors in terms of tensile properties and impact toughness were analyzed in correlation with microstructural evolution. The results showed that the lower finish cooling temperature could lead to a considerable increase in impact toughness for this steel. A mixed microstructure was obtained by TMCP at lower finish cooling temperature, which contained much fine lath-like bainite with dot-shaped M/A constituent and less granular bainite and bainite ferrite. In this case, this steel possesses yield and ultimate tensile strengths of ~ 885 MPa and 1089 MPa, respectively, and a total elongation of ~ 15.3%, while it has a lower yield ratio of ~ 0.81. The superior impact toughness of ~ 89 J at-20 °C was obtained, and this was resulted from the multi-phase microstructure including grain refinement, preferred grain boundaries misorientation, fine lath-like bainite with dot-shaped M/A constituent.展开更多
前瞻记忆后效(aftereffects of prospective memory)是指个体错误地重复执行已完成的前瞻记忆意向或已完成的意向对进行中任务产生干扰的现象。基于前瞻记忆多重加工理论,通过对文献梳理发现,任务特征(前瞻记忆任务特征、进行中任务特...前瞻记忆后效(aftereffects of prospective memory)是指个体错误地重复执行已完成的前瞻记忆意向或已完成的意向对进行中任务产生干扰的现象。基于前瞻记忆多重加工理论,通过对文献梳理发现,任务特征(前瞻记忆任务特征、进行中任务特征、任务情境)和个体特征会调节事件性前瞻记忆后效。目前,关于事件性前瞻记忆后效的加工机制的理论解释主要包括自动化加工、控制加工、提取−抑制加工、停止标记加工、双加工和动态多重加工等。其中,自动化加工可分为反射−联结加工和差异−搜索加工,而控制加工又可分为监控加工和抑制加工。事件性前瞻记忆后效的形成与自动化加工和监控加工关系更密切,而后效的消退更依赖抑制加工。未来研究需深入考察事件性前瞻记忆后效的加工机制,增加对不同类型以及自然情境中前瞻记忆后效的考察,注重探究降低前瞻记忆后效的策略。展开更多
Gas metal arc welding experiments were conducted on two types of steels with 0.41% carbon equivalent(Ceq) and 0.31% Cequsing WER70T wire and 20% CO_(2)and 80% Ar as shielding gas.The two types of steels show satisfact...Gas metal arc welding experiments were conducted on two types of steels with 0.41% carbon equivalent(Ceq) and 0.31% Cequsing WER70T wire and 20% CO_(2)and 80% Ar as shielding gas.The two types of steels show satisfactory weldability.The transition temperatures of 50% upper shelf energy(Tk0.5) for Charpy-V impact test of both the welded joints are below-40 ℃.However, the toughness of the fusion line zone and heat-affected zone(HAZ) of the two steel joints exhibits differences, with the toughness of 0.41% Ceqsteel being better than that of 0.31% Ceqsteel.The Tk0.5of the fusion line zone and the HAZ of 0.41% Ceqsteel is below-60℃,whereas that of 0.31% Ceqsteel is above-40℃.The welded joint of 0.41% Ceqsteel has low hardness fluctuation, while that of 0.31% Ceqsteel exhibits a narrow, softened zone, which has no obvious influence on the tested tensile strength.The coarse grain heat-affected zone(CGHAZ)microstructure of 0.41% Ceqsteel is bainite, while that of 0.31% Ceqsteel is bainite with ferrite and minor pearlite.展开更多
This paper discusses the progress of computer integrated processing （CIPS） of coal-preparation and then preserits an intelligence controlled production-process, device-maintenance and production-management system of...This paper discusses the progress of computer integrated processing （CIPS） of coal-preparation and then preserits an intelligence controlled production-process, device-maintenance and production-management system of coal- preparation based on multi-agents （IICMMS-CP）. The construction of the IICMMS-CP, the distributed network control system based on live intelligence control stations and the strategy of implementing distributed intelligence control system are studied in order to overcome the disadvantages brought about by the wide use of the PLC system by coaipreparation plants. The software frame, based on a Multi-Agent Intelligence Control and Maintenance Management integrated system, is studied and the implemention methods of IICMMS-CP are discussed. The characteristics of distributed architecture, cooperation and parallel computing meet the needs of integrated control of coal-preparation plants with large-scale spatial production distribution, densely-related processes and complex systems. Its application further improves the reliability and precision of process control, accuracy of fault identification and intelligence of production adjustment, establishes a technical basis for system integration and flexible production. The main function of the system has been tested in a coal-preparation plant to good effect in stabilizing product quality, improving efficiency and reducing consumption.展开更多
四重模型(The Quadruple Process Model,简称Quad Model)是一个可对内隐任务中四种性质不同加工的独立、同时性影响进行测量的多项式模型。首先采用武器识别任务等实例对模型参数、结构、数据分析及可行性进行说明;随后介绍该模型在内...四重模型(The Quadruple Process Model,简称Quad Model)是一个可对内隐任务中四种性质不同加工的独立、同时性影响进行测量的多项式模型。首先采用武器识别任务等实例对模型参数、结构、数据分析及可行性进行说明;随后介绍该模型在内隐研究中的应用,涉及情境易变性与可塑性、个体与群体差异及内隐任务外行为等三类问题;最后从多方面对其进行评价与展望。展开更多
The strength-to-weight ratio is an important property of high-strength low-alloy(HSLA)steel in pipeline,whose precipitation strengthening can be improved.The final rolling temperature(FRT)and coiling temperature(CT)ar...The strength-to-weight ratio is an important property of high-strength low-alloy(HSLA)steel in pipeline,whose precipitation strengthening can be improved.The final rolling temperature(FRT)and coiling temperature(CT)are the key process parameters in the control of precipitates and microstructure.Continuous cooling rate was fixed at 10℃/s,and the effects of deformation and coiling temperatures on precipitates and microstructure of Ti-Nb microalloyed HSLA steel were investigated through thermo-mechanical controlled processing on Gleeble 3500.The microstructure is mainly acicular ferrite with high density dislocation and several microns scale.The size and volume fraction of the precipitates were studied under transmission electron microscopy.The results showed that the diameter of the precipitates was in the range between 4 and 240 nm.The optimized combination of parameters is FRT of 820℃and CT of 550℃,and the volume fraction of precipitates obtained under this process is 0.59%.展开更多
Experiments were conducted to evaluate the microstructure and tensile properties of a medium carbon Cr-Ni-W-Mo steel processedthermo-mechanical controlled processing(TMCP)with cooling at different conditions in water,...Experiments were conducted to evaluate the microstructure and tensile properties of a medium carbon Cr-Ni-W-Mo steel processedthermo-mechanical controlled processing(TMCP)with cooling at different conditions in water,oil,air or lime followedlow tempering.Compared to normal heat-treatment processing,TMCP with water-cooling after deformation enhances the yield strength and tensile strength of the steelabout 323 MPa and about 251 MPa,respectively,due to higher dislocation strengthening and grain boundary strengthening.Meanwhile,it increases the elongation by ;about 1.76%attributed to the increase in volume percentage of the retained austenite and the refined laths of tempered martensite.Slowing the cooling rate after deformation during TMCP leads to a decrease in the strength.This results the coupling effectsthe reduction in dislocation density and volume fraction of tempered martensite together with the coarseness in martensite sizes.However,cooling rate decreasing has less influences on ductility becathe improved elongation the increase in the volume fractions of both retained austenite and lower bainite together with dislocation density decreasing is compensatedthe reduced elongation coarsened grains.展开更多
文摘L2 reading is not only an important channel for people to obtain information and knowledge,but also the main way for people to learn a foreign language.Reading information processing can be divided into controlled processing and automatic processing.Controlled information processing is a conscious and resource-intensive processing model,while automatic information processing is an unconscious and automatic processing model.This study investigates the characteristics and interactivity of controlled and automatic information processing in L2 reading,and explores the roles of controlled and automatic information processing strategies in improving L2 reading ability.The findings are as follows:(a)controlled and automatic information processing is interactive in L2 reading;and(b)the uses of controlled and automatic information processing strategies are beneficial to the improvement of the reading ability of L2 learners.This study has important theoretical and practical value in improving the efficiency of L2 reading teaching and learning.
基金financially supported by the National Natural Science Foundation of China(Grant No.51904071)the Independent Project of State Key Laboratory of Rolling and Automation,Northeastern University(Grant No.ZZ202001)+1 种基金the Key Research and Development Program of Hebei Province of China(Grant No.18211019D)the Start-up Project of Doctor Scientific Research of Liaoning Province(Grant No.2020-BS-271)。
文摘The present article aims at elucidating the effect of thermo-mechanical controlled processing(TMCP), especially the finish cooling temperature, on microstructure and mechanical properties of high strength low alloy steels for developing superior low temperature toughness construction steel. The microstructural features were characterized by scanning electron microscope equipped with electron backscatter diffraction, and the mechanical behaviors in terms of tensile properties and impact toughness were analyzed in correlation with microstructural evolution. The results showed that the lower finish cooling temperature could lead to a considerable increase in impact toughness for this steel. A mixed microstructure was obtained by TMCP at lower finish cooling temperature, which contained much fine lath-like bainite with dot-shaped M/A constituent and less granular bainite and bainite ferrite. In this case, this steel possesses yield and ultimate tensile strengths of ~ 885 MPa and 1089 MPa, respectively, and a total elongation of ~ 15.3%, while it has a lower yield ratio of ~ 0.81. The superior impact toughness of ~ 89 J at-20 °C was obtained, and this was resulted from the multi-phase microstructure including grain refinement, preferred grain boundaries misorientation, fine lath-like bainite with dot-shaped M/A constituent.
文摘前瞻记忆后效(aftereffects of prospective memory)是指个体错误地重复执行已完成的前瞻记忆意向或已完成的意向对进行中任务产生干扰的现象。基于前瞻记忆多重加工理论,通过对文献梳理发现,任务特征(前瞻记忆任务特征、进行中任务特征、任务情境)和个体特征会调节事件性前瞻记忆后效。目前,关于事件性前瞻记忆后效的加工机制的理论解释主要包括自动化加工、控制加工、提取−抑制加工、停止标记加工、双加工和动态多重加工等。其中,自动化加工可分为反射−联结加工和差异−搜索加工,而控制加工又可分为监控加工和抑制加工。事件性前瞻记忆后效的形成与自动化加工和监控加工关系更密切,而后效的消退更依赖抑制加工。未来研究需深入考察事件性前瞻记忆后效的加工机制,增加对不同类型以及自然情境中前瞻记忆后效的考察,注重探究降低前瞻记忆后效的策略。
文摘Gas metal arc welding experiments were conducted on two types of steels with 0.41% carbon equivalent(Ceq) and 0.31% Cequsing WER70T wire and 20% CO_(2)and 80% Ar as shielding gas.The two types of steels show satisfactory weldability.The transition temperatures of 50% upper shelf energy(Tk0.5) for Charpy-V impact test of both the welded joints are below-40 ℃.However, the toughness of the fusion line zone and heat-affected zone(HAZ) of the two steel joints exhibits differences, with the toughness of 0.41% Ceqsteel being better than that of 0.31% Ceqsteel.The Tk0.5of the fusion line zone and the HAZ of 0.41% Ceqsteel is below-60℃,whereas that of 0.31% Ceqsteel is above-40℃.The welded joint of 0.41% Ceqsteel has low hardness fluctuation, while that of 0.31% Ceqsteel exhibits a narrow, softened zone, which has no obvious influence on the tested tensile strength.The coarse grain heat-affected zone(CGHAZ)microstructure of 0.41% Ceqsteel is bainite, while that of 0.31% Ceqsteel is bainite with ferrite and minor pearlite.
文摘This paper discusses the progress of computer integrated processing （CIPS） of coal-preparation and then preserits an intelligence controlled production-process, device-maintenance and production-management system of coal- preparation based on multi-agents （IICMMS-CP）. The construction of the IICMMS-CP, the distributed network control system based on live intelligence control stations and the strategy of implementing distributed intelligence control system are studied in order to overcome the disadvantages brought about by the wide use of the PLC system by coaipreparation plants. The software frame, based on a Multi-Agent Intelligence Control and Maintenance Management integrated system, is studied and the implemention methods of IICMMS-CP are discussed. The characteristics of distributed architecture, cooperation and parallel computing meet the needs of integrated control of coal-preparation plants with large-scale spatial production distribution, densely-related processes and complex systems. Its application further improves the reliability and precision of process control, accuracy of fault identification and intelligence of production adjustment, establishes a technical basis for system integration and flexible production. The main function of the system has been tested in a coal-preparation plant to good effect in stabilizing product quality, improving efficiency and reducing consumption.
文摘四重模型(The Quadruple Process Model,简称Quad Model)是一个可对内隐任务中四种性质不同加工的独立、同时性影响进行测量的多项式模型。首先采用武器识别任务等实例对模型参数、结构、数据分析及可行性进行说明;随后介绍该模型在内隐研究中的应用,涉及情境易变性与可塑性、个体与群体差异及内隐任务外行为等三类问题;最后从多方面对其进行评价与展望。
基金supported by Science and Technology Innovation Cooperation Project between China and South Africa(2017YFE0113400).
文摘The strength-to-weight ratio is an important property of high-strength low-alloy(HSLA)steel in pipeline,whose precipitation strengthening can be improved.The final rolling temperature(FRT)and coiling temperature(CT)are the key process parameters in the control of precipitates and microstructure.Continuous cooling rate was fixed at 10℃/s,and the effects of deformation and coiling temperatures on precipitates and microstructure of Ti-Nb microalloyed HSLA steel were investigated through thermo-mechanical controlled processing on Gleeble 3500.The microstructure is mainly acicular ferrite with high density dislocation and several microns scale.The size and volume fraction of the precipitates were studied under transmission electron microscopy.The results showed that the diameter of the precipitates was in the range between 4 and 240 nm.The optimized combination of parameters is FRT of 820℃and CT of 550℃,and the volume fraction of precipitates obtained under this process is 0.59%.
基金supported by the National Natural Science Foundation of China under Grant No.51671030.
文摘Experiments were conducted to evaluate the microstructure and tensile properties of a medium carbon Cr-Ni-W-Mo steel processedthermo-mechanical controlled processing(TMCP)with cooling at different conditions in water,oil,air or lime followedlow tempering.Compared to normal heat-treatment processing,TMCP with water-cooling after deformation enhances the yield strength and tensile strength of the steelabout 323 MPa and about 251 MPa,respectively,due to higher dislocation strengthening and grain boundary strengthening.Meanwhile,it increases the elongation by ;about 1.76%attributed to the increase in volume percentage of the retained austenite and the refined laths of tempered martensite.Slowing the cooling rate after deformation during TMCP leads to a decrease in the strength.This results the coupling effectsthe reduction in dislocation density and volume fraction of tempered martensite together with the coarseness in martensite sizes.However,cooling rate decreasing has less influences on ductility becathe improved elongation the increase in the volume fractions of both retained austenite and lower bainite together with dislocation density decreasing is compensatedthe reduced elongation coarsened grains.
