Innovative definitions of the electric and magnetic diffusivities through conducting mediums and innovative diffusion equations of the electric charges and magnetic flux are verified in this article. Such innovations ...Innovative definitions of the electric and magnetic diffusivities through conducting mediums and innovative diffusion equations of the electric charges and magnetic flux are verified in this article. Such innovations depend on the analogy of the governing laws of diffusion of the thermal, electrical, and magnetic energies and newly defined natures of the electric charges and magnetic flux as energy, or as electromagnetic waves, that have electric and magnetic potentials. The introduced diffusion equations of the electric charges and magnetic flux involve Laplacian operator and the introduced diffusivities. Both equations are applied to determine the electric and magnetic fields in conductors as the heat diffusion equation which is applied to determine the thermal field in steady and unsteady heat diffusion conditions. The use of electric networks for experimental modeling of thermal networks represents sufficient proof of similarity of the diffusion equations of both fields. By analysis of the diffusion phenomena of the three considered modes of energy transfer;the rates of flow of these energies are found to be directly proportional to the gradient of their volumetric concentration, or density, and the proportionality constants in such relations are the diffusivity of each energy. Such analysis leads also to find proportionality relations between the potentials of such energies and their volumetric concentrations. Validity of the introduced diffusion equations is verified by correspondence their solutions to the measurement results of the electric and magnetic fields in microwave ovens.展开更多
The additives-doped α-nickel hydroxides were prepared by supersonic co-precipitation method. The crystal structure and grain size of the prepared samples were characterized by X-ray diffraction （XRD） and Particle s...The additives-doped α-nickel hydroxides were prepared by supersonic co-precipitation method. The crystal structure and grain size of the prepared samples were characterized by X-ray diffraction （XRD） and Particle size distribution （PSD）, respectively. Cyclic voltammetry （CV） tests show that Al-Co-Y doped Ni（OH）2 has better reaction reversibility, higher proton diffusion coefficient than those of Al-Co doped Ni（OH）2. Al-Co-Y doped Ni（OH）2 also has lower charge-transfer resistance as shown by electrochemical impedance spectroscopy （EIS）. Charge/discharge tests show that the discharge capacity of Al-Co-Y doped Ni（OH）2 reaches 328 mAh/g at 0.2 C and 306 mAh/g at 0.5 C, while Al-Co doped Ni（OH）2 can only discharge a capacity of 308 mAh/g at 0.2 C and 267 mAh/g at 0.5 C.展开更多
Li4Ti5012 (LTO) with rich R-TiO2 (17.06, 23.69, and 34.42 wt%), namely, R-TiO2@Li4Ti5O12 composites, were synthesized using the hydrothermal method and tetrabutyl titanate (TBT) as the precursor. Rietveld refinement o...Li4Ti5012 (LTO) with rich R-TiO2 (17.06, 23.69, and 34.42 wt%), namely, R-TiO2@Li4Ti5O12 composites, were synthesized using the hydrothermal method and tetrabutyl titanate (TBT) as the precursor. Rietveld refinement of X-ray diffraction (XRD) results show that the proportion of Li occupying 16d sites is extraordinary low and the lattice constants of LTO and R-TiO2 change with the ritanium dioxide content. EIS measurements showed that with in creasing R-TiO2 content, both its charge transfer impedance (Rct) and lithium ion diffusion coefficient (DLi) decreased. The changes of Rct and DLi caused by the increase of titanium dioxide content have synergic-antagonistic effects on the rate and cycle properties of Li4Ti5012. The rate performance is positively related to DLi, while the cycle property is negatively correlated with Rct, indicati ng that the rate performs nee is mainly related to DLi, while Rct more significantly affects the cycle performance. LTO-RT-17.06% exhibited excellent rate properties, especially under a high current density (5.0 C, 132.5 mAh/g) and LTO-RT-34.42% showed superior long-term cycle performance (0.012% capacity loss per cycle) compared to that of LTO-RT-17.06% and LTO-RT-23.69%.展开更多
文摘Innovative definitions of the electric and magnetic diffusivities through conducting mediums and innovative diffusion equations of the electric charges and magnetic flux are verified in this article. Such innovations depend on the analogy of the governing laws of diffusion of the thermal, electrical, and magnetic energies and newly defined natures of the electric charges and magnetic flux as energy, or as electromagnetic waves, that have electric and magnetic potentials. The introduced diffusion equations of the electric charges and magnetic flux involve Laplacian operator and the introduced diffusivities. Both equations are applied to determine the electric and magnetic fields in conductors as the heat diffusion equation which is applied to determine the thermal field in steady and unsteady heat diffusion conditions. The use of electric networks for experimental modeling of thermal networks represents sufficient proof of similarity of the diffusion equations of both fields. By analysis of the diffusion phenomena of the three considered modes of energy transfer;the rates of flow of these energies are found to be directly proportional to the gradient of their volumetric concentration, or density, and the proportionality constants in such relations are the diffusivity of each energy. Such analysis leads also to find proportionality relations between the potentials of such energies and their volumetric concentrations. Validity of the introduced diffusion equations is verified by correspondence their solutions to the measurement results of the electric and magnetic fields in microwave ovens.
基金Funded by National Natural Science Foundation of China (No.10774030)Science and Technology Program of Guangzhou City of China (No.2008J1-C161)
文摘The additives-doped α-nickel hydroxides were prepared by supersonic co-precipitation method. The crystal structure and grain size of the prepared samples were characterized by X-ray diffraction （XRD） and Particle size distribution （PSD）, respectively. Cyclic voltammetry （CV） tests show that Al-Co-Y doped Ni（OH）2 has better reaction reversibility, higher proton diffusion coefficient than those of Al-Co doped Ni（OH）2. Al-Co-Y doped Ni（OH）2 also has lower charge-transfer resistance as shown by electrochemical impedance spectroscopy （EIS）. Charge/discharge tests show that the discharge capacity of Al-Co-Y doped Ni（OH）2 reaches 328 mAh/g at 0.2 C and 306 mAh/g at 0.5 C, while Al-Co doped Ni（OH）2 can only discharge a capacity of 308 mAh/g at 0.2 C and 267 mAh/g at 0.5 C.
基金financially supported by the National Natural Science Foundation of China(No.51641206)Shandong Natural Science Foundation Project(No.ZR2015EM013)+1 种基金Special Funds for Independent Innovation and Transformation of Achievements in Shandong Province(No.2014CGZH0911)National Key R&D Program of China(No.2016YFB0100508)
文摘Li4Ti5012 (LTO) with rich R-TiO2 (17.06, 23.69, and 34.42 wt%), namely, R-TiO2@Li4Ti5O12 composites, were synthesized using the hydrothermal method and tetrabutyl titanate (TBT) as the precursor. Rietveld refinement of X-ray diffraction (XRD) results show that the proportion of Li occupying 16d sites is extraordinary low and the lattice constants of LTO and R-TiO2 change with the ritanium dioxide content. EIS measurements showed that with in creasing R-TiO2 content, both its charge transfer impedance (Rct) and lithium ion diffusion coefficient (DLi) decreased. The changes of Rct and DLi caused by the increase of titanium dioxide content have synergic-antagonistic effects on the rate and cycle properties of Li4Ti5012. The rate performance is positively related to DLi, while the cycle property is negatively correlated with Rct, indicati ng that the rate performs nee is mainly related to DLi, while Rct more significantly affects the cycle performance. LTO-RT-17.06% exhibited excellent rate properties, especially under a high current density (5.0 C, 132.5 mAh/g) and LTO-RT-34.42% showed superior long-term cycle performance (0.012% capacity loss per cycle) compared to that of LTO-RT-17.06% and LTO-RT-23.69%.
