Cd coating is used in aerospace industries from last five decades due to its sacrificial protection and lubrication properties. Although Cd coating is primarily used due to its sacrificial corrosion protection when ap...Cd coating is used in aerospace industries from last five decades due to its sacrificial protection and lubrication properties. Although Cd coating is primarily used due to its sacrificial corrosion protection when applied on steel substrate, the added benefit of modifying the tribological behavior by acting as a lubricious layer gives it a leading-edge than other coatings. Often the measurement of friction coefficient (CoF) is reported as a value generated after full sliding cycle. This measurement of average CoF generally limits the study of local variation in CoF occurring within one sliding cycle, which can be significantly different with change in spatial position due to change in third body morphology. In this study, a linearly reciprocating sliding test is used to measure the CoF at a sampling rate of 800 Hz along the track length to generate triboscopic image with steel countersphere. The instantaneous CoF obtained with triboscopy is correlated with the wear track morphology using scanning electron microscope (SEM) and optical profilometer for variation in contact conditions. Tribological test performed in dry atmosphere shows an average CoF of 0.4 till the end of the test whereas with increase in relative humidity to 60%, the average CoF changes from 0.4 to 0.8 at the end of the test due to change in contact conditions. Soft Cd coating on low carbon steel substrate is used to study these variations in third body morphology.展开更多
Natural freshwater surface coatings(biofilms and associated minerals), which were developed in the Nanhu Lake, Changchun, P. R. China, were used as an efficient biosorbent for the removal of Cd(Ⅱ) from aqueous soluti...Natural freshwater surface coatings(biofilms and associated minerals), which were developed in the Nanhu Lake, Changchun, P. R. China, were used as an efficient biosorbent for the removal of Cd(Ⅱ) from aqueous solutions. The batch experiments were carried out to determine the adsorption properties of Cd(Ⅱ) onto the natural surface coatings. The classical Langmuir adsorption isotherm was applied to estimating the equilibrium coefficients of Cd(Ⅱ) adsorbed on the surface coatings. The results show that the maximum adsorption capacity of the surface coatings is 434.78 μmol Cd/m2(being equal to 0.17 mmol Cd/g of surface coatings or 10.38 mmol Cd/g Fe) and the Cd(Ⅱ) removal from solution media by the natural surface coatings was shown to be strongly affected by solution pH and ion strength. The resulted information also indicates that the maximum Cd removal efficiency(CRE) was determined to be approximately 90% at initial Cd mass concentration of 0.1 mg/L(the concentration limit of Cd (Ⅱ) in wastewaters for discharge in aquatic media in Chinese legislation), and the kinetic adsorption of Cd(Ⅱ) onto the surface coatings is fast with around 70% of the total adsorption-taking place in 150 min in solution under the controlled laboratory conditions (mineral salts solution with defined speciation, ionic strength 0.05 mol/L, and 25 ℃). With the advantage of high Cd adsorption capacity, the natural surface coatings appear to be a potentially effective biosorbent for the removal and recovery of Cd (Ⅱ) from polluted water.展开更多
基金Natural Science and Engineering Research Council Canada(NSERC)Boeing Research and Technology+2 种基金Pratt and Whitney CanadaHéroux Devtek,Canadian Fastener InstituteMessier-Bugatti-Dowty
文摘Cd coating is used in aerospace industries from last five decades due to its sacrificial protection and lubrication properties. Although Cd coating is primarily used due to its sacrificial corrosion protection when applied on steel substrate, the added benefit of modifying the tribological behavior by acting as a lubricious layer gives it a leading-edge than other coatings. Often the measurement of friction coefficient (CoF) is reported as a value generated after full sliding cycle. This measurement of average CoF generally limits the study of local variation in CoF occurring within one sliding cycle, which can be significantly different with change in spatial position due to change in third body morphology. In this study, a linearly reciprocating sliding test is used to measure the CoF at a sampling rate of 800 Hz along the track length to generate triboscopic image with steel countersphere. The instantaneous CoF obtained with triboscopy is correlated with the wear track morphology using scanning electron microscope (SEM) and optical profilometer for variation in contact conditions. Tribological test performed in dry atmosphere shows an average CoF of 0.4 till the end of the test whereas with increase in relative humidity to 60%, the average CoF changes from 0.4 to 0.8 at the end of the test due to change in contact conditions. Soft Cd coating on low carbon steel substrate is used to study these variations in third body morphology.
文摘Natural freshwater surface coatings(biofilms and associated minerals), which were developed in the Nanhu Lake, Changchun, P. R. China, were used as an efficient biosorbent for the removal of Cd(Ⅱ) from aqueous solutions. The batch experiments were carried out to determine the adsorption properties of Cd(Ⅱ) onto the natural surface coatings. The classical Langmuir adsorption isotherm was applied to estimating the equilibrium coefficients of Cd(Ⅱ) adsorbed on the surface coatings. The results show that the maximum adsorption capacity of the surface coatings is 434.78 μmol Cd/m2(being equal to 0.17 mmol Cd/g of surface coatings or 10.38 mmol Cd/g Fe) and the Cd(Ⅱ) removal from solution media by the natural surface coatings was shown to be strongly affected by solution pH and ion strength. The resulted information also indicates that the maximum Cd removal efficiency(CRE) was determined to be approximately 90% at initial Cd mass concentration of 0.1 mg/L(the concentration limit of Cd (Ⅱ) in wastewaters for discharge in aquatic media in Chinese legislation), and the kinetic adsorption of Cd(Ⅱ) onto the surface coatings is fast with around 70% of the total adsorption-taking place in 150 min in solution under the controlled laboratory conditions (mineral salts solution with defined speciation, ionic strength 0.05 mol/L, and 25 ℃). With the advantage of high Cd adsorption capacity, the natural surface coatings appear to be a potentially effective biosorbent for the removal and recovery of Cd (Ⅱ) from polluted water.
