Sequestration of CO2 in deep and unmineable coal seams is one of the attractive alternatives to reduce its atmospheric concentration. Injection of CO2 in coal seams may help in enhancing the recovery of coalbed methan...Sequestration of CO2 in deep and unmineable coal seams is one of the attractive alternatives to reduce its atmospheric concentration. Injection of CO2 in coal seams may help in enhancing the recovery of coalbed methane. An experimental study has been carried out using coal samples from three different coal seams, to evaluate the enhanced gas recovery and sequestration potential of these coals. The coals were first saturated with methane and then by depressurization some of the adsorbed methane was desorbed. After partial desorption, CO2 was injected into the coals and subsequently they were depressurized again. Desorption of methane after the injections was studied, to investigate the ability of CO2 to displace and enhance the recovery of methane from the coals. The coals exhibited varying behavior of adsorption of CO2 and release of methane. For one coal, the release of methane was enhanced by injection of CO2, suggesting preferential adsorption of CO2 and desorption of methane. For the other two coals, CO2 injection did not produce incremental methane initially, as there was initial resistance to methane release. However with continued CO2 injection, most of the remaining methane was produced. The study suggested that preferential sorption behavior of coal and enhanced gas recovery pattern could not be generalized for all coals.展开更多
Storage of CO2 in saline aquifers is a viable option for reducing the amount of CO2 released to the atmosphere. This paper provides an overall review of CO2 sequestration in saline aquifers. First, the principles of C...Storage of CO2 in saline aquifers is a viable option for reducing the amount of CO2 released to the atmosphere. This paper provides an overall review of CO2 sequestration in saline aquifers. First, the principles of CO2 sequestration are presented, including CO2 phase behavior, CO2-water-rock interaction, and CO2 trapping mechanisms. Then storage capacity and CO2 injectivity are discussed as the main determinants of the storage potential of saline aquifers. Next, a site section process is addressed considering basin characteristics, reservoir characteristics, and economic and social concerns. Three main procedures are then presented to investigate the suitability of a site for CO2 sequestration, including site screening, detailed site characterization, and pilot field-scale test. The methods for these procedures are also presented, such as traditional site characterization methods, laboratory experiments, and numerical simulation. Finally, some operational aspects of sequestration are discussed, including well type, injection rate, CO2 purity, and injection strategy.展开更多
Large quantities of COand blast furnace slag are discharged in the iron and steel industry. Mineral carbonation of blast furnace slag can offer substantial COemission reduction and comprehensive utilisation of the sol...Large quantities of COand blast furnace slag are discharged in the iron and steel industry. Mineral carbonation of blast furnace slag can offer substantial COemission reduction and comprehensive utilisation of the solid waste. In this study, a recyclable extractant,（NH）SO, was used to extract calcium and magnesium from blast furnace slag（main phases of gehlenite and akermanite） by using low-temperature roasting to fix COthrough aqueous carbonation. The process parameters and efficiency of the roasting extraction, mineralisation, and Al recovery were investigated in detail. The results showed that the extractions of Ca, Mg, and Al can reach almost 100% at an（NH4）SO-to-slag mass ratio of 3:1 and at 370°C in 1 h. Adjusting the p H value of the leaching solution of the roasted slag to 5.5 with the NHreleased during the roasting resulted in 99% Al precipitation, while co-precipitation of Mg was lower than 2%. The Mg-rich leachate after the depletion of Al and the leaching residue（main phases of CaSOand SiO） were carbonated using（NH）COand NHHCOsolutions, respectively, under mild conditions. Approximately 99% of Ca and 89% of Mg in the blast furnace slag were converted into CaCOand（NH）Mg（CO）·4 HO,respectively. The latter can be selectively decomposed to magnesium carbonate at 100-200 °C to recover the NHfor reuse. In the present route, the total COsequestration capacity per tonne of blast furnace slag reached up to 316 kg, and 313 kg of Al-rich precipitate, 1000 kg of carbonated product containing CaCOand SiO, and 304 kg of carbonated product containing calcium carbonate and magnesium carbonate were recovered simultaneously. These products can be used, respectively, as raw materials for the production of electrolytic aluminium, cement, and light magnesium carbonate to replace natural resources.展开更多
Less than 10% of oil is usually recovered from liquid-rich shales and this leaves much room for improvement, while water injection into shale formation is virtually impossible because of the extremely low permeability...Less than 10% of oil is usually recovered from liquid-rich shales and this leaves much room for improvement, while water injection into shale formation is virtually impossible because of the extremely low permeability of the formation matrix. Injecting carbon dioxide（CO2） into oil shale formations can potentially improve oil recovery. Furthermore, the large surface area in organicrich shale could permanently store CO2 without jeopardizing the formation integrity. This work is a mechanism study of evaluating the effectiveness of CO2-enhanced oil shale recovery and shale formation CO2 sequestration capacity using numerical simulation. Petrophysical and fluid properties similar to the Bakken Formation are used to set up the base model for simulation. Result shows that the CO_2 injection could increase the oil recovery factor from7.4% to 53%. In addition, petrophysical characteristics such as in situ stress changes and presence of a natural fracture network in the shale formation are proven to have impacts on subsurface CO2 flow. A response surface modeling approach was applied to investigate the interaction between parameters and generate a proxy model for optimizing oil recovery and CO2 injectivity.展开更多
文摘Sequestration of CO2 in deep and unmineable coal seams is one of the attractive alternatives to reduce its atmospheric concentration. Injection of CO2 in coal seams may help in enhancing the recovery of coalbed methane. An experimental study has been carried out using coal samples from three different coal seams, to evaluate the enhanced gas recovery and sequestration potential of these coals. The coals were first saturated with methane and then by depressurization some of the adsorbed methane was desorbed. After partial desorption, CO2 was injected into the coals and subsequently they were depressurized again. Desorption of methane after the injections was studied, to investigate the ability of CO2 to displace and enhance the recovery of methane from the coals. The coals exhibited varying behavior of adsorption of CO2 and release of methane. For one coal, the release of methane was enhanced by injection of CO2, suggesting preferential adsorption of CO2 and desorption of methane. For the other two coals, CO2 injection did not produce incremental methane initially, as there was initial resistance to methane release. However with continued CO2 injection, most of the remaining methane was produced. The study suggested that preferential sorption behavior of coal and enhanced gas recovery pattern could not be generalized for all coals.
基金support from the China Scholarship Council ([2007]3020) is gratefully acknowledged
文摘Storage of CO2 in saline aquifers is a viable option for reducing the amount of CO2 released to the atmosphere. This paper provides an overall review of CO2 sequestration in saline aquifers. First, the principles of CO2 sequestration are presented, including CO2 phase behavior, CO2-water-rock interaction, and CO2 trapping mechanisms. Then storage capacity and CO2 injectivity are discussed as the main determinants of the storage potential of saline aquifers. Next, a site section process is addressed considering basin characteristics, reservoir characteristics, and economic and social concerns. Three main procedures are then presented to investigate the suitability of a site for CO2 sequestration, including site screening, detailed site characterization, and pilot field-scale test. The methods for these procedures are also presented, such as traditional site characterization methods, laboratory experiments, and numerical simulation. Finally, some operational aspects of sequestration are discussed, including well type, injection rate, CO2 purity, and injection strategy.
基金financial support of the National Key R&D Program of China(2016YFB0600904)
文摘Large quantities of COand blast furnace slag are discharged in the iron and steel industry. Mineral carbonation of blast furnace slag can offer substantial COemission reduction and comprehensive utilisation of the solid waste. In this study, a recyclable extractant,（NH）SO, was used to extract calcium and magnesium from blast furnace slag（main phases of gehlenite and akermanite） by using low-temperature roasting to fix COthrough aqueous carbonation. The process parameters and efficiency of the roasting extraction, mineralisation, and Al recovery were investigated in detail. The results showed that the extractions of Ca, Mg, and Al can reach almost 100% at an（NH4）SO-to-slag mass ratio of 3:1 and at 370°C in 1 h. Adjusting the p H value of the leaching solution of the roasted slag to 5.5 with the NHreleased during the roasting resulted in 99% Al precipitation, while co-precipitation of Mg was lower than 2%. The Mg-rich leachate after the depletion of Al and the leaching residue（main phases of CaSOand SiO） were carbonated using（NH）COand NHHCOsolutions, respectively, under mild conditions. Approximately 99% of Ca and 89% of Mg in the blast furnace slag were converted into CaCOand（NH）Mg（CO）·4 HO,respectively. The latter can be selectively decomposed to magnesium carbonate at 100-200 °C to recover the NHfor reuse. In the present route, the total COsequestration capacity per tonne of blast furnace slag reached up to 316 kg, and 313 kg of Al-rich precipitate, 1000 kg of carbonated product containing CaCOand SiO, and 304 kg of carbonated product containing calcium carbonate and magnesium carbonate were recovered simultaneously. These products can be used, respectively, as raw materials for the production of electrolytic aluminium, cement, and light magnesium carbonate to replace natural resources.
基金support from the Warwick Energy Group and University of Oklahoma to publish this work
文摘Less than 10% of oil is usually recovered from liquid-rich shales and this leaves much room for improvement, while water injection into shale formation is virtually impossible because of the extremely low permeability of the formation matrix. Injecting carbon dioxide（CO2） into oil shale formations can potentially improve oil recovery. Furthermore, the large surface area in organicrich shale could permanently store CO2 without jeopardizing the formation integrity. This work is a mechanism study of evaluating the effectiveness of CO2-enhanced oil shale recovery and shale formation CO2 sequestration capacity using numerical simulation. Petrophysical and fluid properties similar to the Bakken Formation are used to set up the base model for simulation. Result shows that the CO_2 injection could increase the oil recovery factor from7.4% to 53%. In addition, petrophysical characteristics such as in situ stress changes and presence of a natural fracture network in the shale formation are proven to have impacts on subsurface CO2 flow. A response surface modeling approach was applied to investigate the interaction between parameters and generate a proxy model for optimizing oil recovery and CO2 injectivity.
