Effects of Mg on the chemical component and size distribution of Ti-bearing inclusions favored grain refinement of the welding induced coarse-grained heat affected zone （CGHAZ）, with enhanced impact toughness in Ti-...Effects of Mg on the chemical component and size distribution of Ti-bearing inclusions favored grain refinement of the welding induced coarse-grained heat affected zone （CGHAZ）, with enhanced impact toughness in Ti-killed steels, which were examined based on experimental observations and thermodynamic calculations. The results indicated that the chemical constituents of the inclusions gradually varied from the Ti-O＋Ti-Mg-O compound oxide to the Ti-Mg-O＋MgO compound oxide and the single-phase MgO, as the Mg content increased from 0.002 3M to 0.006%. A trace addition of Mg （approximately 0. 002%） led to the refinement of Ti-bearing inclusions by creating the Ti-Mg-O compound oxide and provided favorable size distribution of the inclusions for acicular ferrite transformation with a high nucleation rate in the CGHAZ, and a high volume fraction of acicular ferrite was obtained in the CGHAZ with enhanced impact toughness. Otherwise, a high content of Mg （approximately 0. 006%） produced a single-phase MgO, which was impotent to nucleate an acicular ferrite, and a microstructure comprised of a ferrite side plate and a grain boundary ferrite developed in the CGHAZ. The experimental results were confirmed by thermodynamic calculations.展开更多
Effects of Zirconium on the chemical component and size distribution of Ti-bearing inclusions, favored the grain refinement of the welding reduced, coarse-grained heat affected zone （CGHAZ） with enhanced impact toug...Effects of Zirconium on the chemical component and size distribution of Ti-bearing inclusions, favored the grain refinement of the welding reduced, coarse-grained heat affected zone （CGHAZ） with enhanced impact toughness in Ti-killed steels, which were examined based on experimental observations and thermodynamic calculations. It indicated that the chemical constituents of inclusions gradually varied from the TiO oxide to the Ti-O＋Zr-O compound oxide and a single phase of the ZrO2 oxide, as the Zr content increased from zero to 0.0100%. A trace of Zr （0.0030%-0.0080%, depending on the oxygen content in liquid steel） provided a large amount of nucleating core for Ti oxide because of the larger specific density of ZrO2 oxide, and produced a small size distribution of the inclusions favorable for acicular ferrite transformation with a high nucleation rate in the CGHAZ, and a high volume fraction of acicular ferrite was obtained in the CGHAZ, with enhanced impact toughness. Otherwise, a high content of Zr （-0.0100%） produced a single phase Zr02, which was impotent to nucleate acicular ferrite, and a microstructure composed of ferrite side plate and grain boundary ferrite developed in the CGHAZ. The experimental results were confirmed by thermodynamic calculations.展开更多
The coarse grain HAZ microstructure and property of X80 pipeline steel with different carbon content was investigated. The weld thermal simulation test was carried out on Gleeble 1500 thermal mechanical test machine. ...The coarse grain HAZ microstructure and property of X80 pipeline steel with different carbon content was investigated. The weld thermal simulation test was carried out on Gleeble 1500 thermal mechanical test machine. The Charpy tests were completed at --20 ℃ for evaluating the toughness of coarse grain heat affected zone （CGHAZ）. The microstructure was examined by optical microscope （OM） and transmission electron microscopy （TEM）, and the austenite constituent was quantified by X-ray diffraction. The results showed that the ultra-low carbon can improve the toughness of CGHAZ by suppressing the formation of carbide, decreasing the martensite austenite （M-A） constituent and increasing the residual austenite in the M A.展开更多
Laser scanning confocal microscopy（LSCM） was used to study the inhibition of austenite grain growth by the inclusions and the effect of cerium on the trend of acicular ferrite（AF） and ferrite side plate（FSP） tra...Laser scanning confocal microscopy（LSCM） was used to study the inhibition of austenite grain growth by the inclusions and the effect of cerium on the trend of acicular ferrite（AF） and ferrite side plate（FSP） transformation temperature in coarse grain heat affected zone（CGHAZ） of Ce-alloyed weld metals. The results showed there were lots of tiny cerium oxides and sulfides inclusions in the CGHAZ of Ce-alloyed weld metals. When the concentration of Ce was 0.021%, the volume fraction of inclusions in weld metal CGHAZ was higher and the inclusion size was smaller, therefore austenite grain size was smaller with the increase of hightemperature residence time. Cerium tended to segregate at austenite grain boundaries, so FSP transformation temperature decreased and FSP transformation was suppressed. On the contrary, AF transformation temperature increased because AF transformation was promoted in CGHAZ of the Ce-alloyed weld metal, especially when the concentration of Ce was 0.021%.展开更多
Microstructure and mechanical performances of the coarse grain heat-affected-zone （CGHAZ） for oil tank steel with different Ti content were investigated through Gleeble-3500, scanning electron microscopy, transmissi...Microstructure and mechanical performances of the coarse grain heat-affected-zone （CGHAZ） for oil tank steel with different Ti content were investigated through Gleeble-3500, scanning electron microscopy, transmission electron microscopy, and energy dispersive spectrometer. The results show that the strength and low- temperature toughness of base material are significantly improved for the high titanium content steel, but the impact toughness of CGHAZ is seriously deteriorated after the high heat input welding and declined sharply with the heat input increasing, while the effects of heat input on impact toughness are very weak for the low titanium content steel, impact toughness of which is gradually larger than that of high titanium content steel with the welding heat input increasing because of the granular bainite increasing, TiN particle coarsening, and （Ti, Nb） N composition evolution during the high input welding for high titanium content steel.展开更多
文摘Effects of Mg on the chemical component and size distribution of Ti-bearing inclusions favored grain refinement of the welding induced coarse-grained heat affected zone （CGHAZ）, with enhanced impact toughness in Ti-killed steels, which were examined based on experimental observations and thermodynamic calculations. The results indicated that the chemical constituents of the inclusions gradually varied from the Ti-O＋Ti-Mg-O compound oxide to the Ti-Mg-O＋MgO compound oxide and the single-phase MgO, as the Mg content increased from 0.002 3M to 0.006%. A trace addition of Mg （approximately 0. 002%） led to the refinement of Ti-bearing inclusions by creating the Ti-Mg-O compound oxide and provided favorable size distribution of the inclusions for acicular ferrite transformation with a high nucleation rate in the CGHAZ, and a high volume fraction of acicular ferrite was obtained in the CGHAZ with enhanced impact toughness. Otherwise, a high content of Mg （approximately 0. 006%） produced a single-phase MgO, which was impotent to nucleate an acicular ferrite, and a microstructure comprised of a ferrite side plate and a grain boundary ferrite developed in the CGHAZ. The experimental results were confirmed by thermodynamic calculations.
文摘Effects of Zirconium on the chemical component and size distribution of Ti-bearing inclusions, favored the grain refinement of the welding reduced, coarse-grained heat affected zone （CGHAZ） with enhanced impact toughness in Ti-killed steels, which were examined based on experimental observations and thermodynamic calculations. It indicated that the chemical constituents of inclusions gradually varied from the TiO oxide to the Ti-O＋Zr-O compound oxide and a single phase of the ZrO2 oxide, as the Zr content increased from zero to 0.0100%. A trace of Zr （0.0030%-0.0080%, depending on the oxygen content in liquid steel） provided a large amount of nucleating core for Ti oxide because of the larger specific density of ZrO2 oxide, and produced a small size distribution of the inclusions favorable for acicular ferrite transformation with a high nucleation rate in the CGHAZ, and a high volume fraction of acicular ferrite was obtained in the CGHAZ, with enhanced impact toughness. Otherwise, a high content of Zr （-0.0100%） produced a single phase Zr02, which was impotent to nucleate acicular ferrite, and a microstructure composed of ferrite side plate and grain boundary ferrite developed in the CGHAZ. The experimental results were confirmed by thermodynamic calculations.
文摘The coarse grain HAZ microstructure and property of X80 pipeline steel with different carbon content was investigated. The weld thermal simulation test was carried out on Gleeble 1500 thermal mechanical test machine. The Charpy tests were completed at --20 ℃ for evaluating the toughness of coarse grain heat affected zone （CGHAZ）. The microstructure was examined by optical microscope （OM） and transmission electron microscopy （TEM）, and the austenite constituent was quantified by X-ray diffraction. The results showed that the ultra-low carbon can improve the toughness of CGHAZ by suppressing the formation of carbide, decreasing the martensite austenite （M-A） constituent and increasing the residual austenite in the M A.
基金Project supported by the National Natural Science Foundation of China(U1260103)
文摘Laser scanning confocal microscopy（LSCM） was used to study the inhibition of austenite grain growth by the inclusions and the effect of cerium on the trend of acicular ferrite（AF） and ferrite side plate（FSP） transformation temperature in coarse grain heat affected zone（CGHAZ） of Ce-alloyed weld metals. The results showed there were lots of tiny cerium oxides and sulfides inclusions in the CGHAZ of Ce-alloyed weld metals. When the concentration of Ce was 0.021%, the volume fraction of inclusions in weld metal CGHAZ was higher and the inclusion size was smaller, therefore austenite grain size was smaller with the increase of hightemperature residence time. Cerium tended to segregate at austenite grain boundaries, so FSP transformation temperature decreased and FSP transformation was suppressed. On the contrary, AF transformation temperature increased because AF transformation was promoted in CGHAZ of the Ce-alloyed weld metal, especially when the concentration of Ce was 0.021%.
基金supported by the Fundamental Research Funds for the National Science and Technology Support Program(No.2011BAE25B01)
文摘Microstructure and mechanical performances of the coarse grain heat-affected-zone （CGHAZ） for oil tank steel with different Ti content were investigated through Gleeble-3500, scanning electron microscopy, transmission electron microscopy, and energy dispersive spectrometer. The results show that the strength and low- temperature toughness of base material are significantly improved for the high titanium content steel, but the impact toughness of CGHAZ is seriously deteriorated after the high heat input welding and declined sharply with the heat input increasing, while the effects of heat input on impact toughness are very weak for the low titanium content steel, impact toughness of which is gradually larger than that of high titanium content steel with the welding heat input increasing because of the granular bainite increasing, TiN particle coarsening, and （Ti, Nb） N composition evolution during the high input welding for high titanium content steel.
