A correction considering the effects of atmospheric temperature, pressure, and Mie contamination must be performed for wind retrieval from a Rayleigh Doppler lidar（RDL）, since the so-called Rayleigh response is dire...A correction considering the effects of atmospheric temperature, pressure, and Mie contamination must be performed for wind retrieval from a Rayleigh Doppler lidar（RDL）, since the so-called Rayleigh response is directly related to the convolution of the optical transmission of the frequency discriminator and the Rayleigh–Brillouin spectrum of the molecular backscattering. Thus, real-time and on-site profiles of atmospheric pressure, temperature, and aerosols should be provided as inputs to the wind retrieval. Firstly, temperature profiles under 35 km and above the altitude are retrieved, respectively,from a high spectral resolution lidar（HSRL） and a Rayleigh integration lidar（RIL） incorporating to the RDL. Secondly,the pressure profile is taken from the European Center for Medium range Weather Forecast（ECMWF） analysis, while radiosonde data are not available. Thirdly, the Klett–Fernald algorithms are adopted to estimate the Mie and Rayleigh components in the atmospheric backscattering. After that, the backscattering ratio is finally determined in a nonlinear fitting of the transmission of the atmospheric backscattering through the Fabry–Perot interferometer（FPI） to a proposed model.In the validation experiments, wind profiles from the lidar show good agreement with the radiosonde in the overlapping altitude. Finally, a continuous wind observation shows the stability of the correction scheme.展开更多
In this study, a hybrid algorithm combining genetic algorithm （GA） with back propagation （BP） neural network （GA-BP） was proposed for extracting the characteristics of multi-peak Brillouin scattering spectrum. S...In this study, a hybrid algorithm combining genetic algorithm （GA） with back propagation （BP） neural network （GA-BP） was proposed for extracting the characteristics of multi-peak Brillouin scattering spectrum. Simulations and experimental results show that the GA-BP hybrid algorithm can accurately identify the position and amount of peaks in multi-peak Brillouin scattering spectrum. Moreover, the proposed algorithm obtains a fitting degree of 0.9923 and a mean square error of 0.0094. Therefore, the GA-BP hybrid algorithm possesses a good fitting precision and is suitable for extracting the characteristics of multi-peak Brillouin scattering spectrum.展开更多
从受激布里渊散射耦合波导方程出发建立了多模光纤布里渊频移、泵浦波、斯托克斯波和声波场理论模型,分析对比了多模光纤与单模光纤布里渊散射谱的频移、增益、线宽和受激布里渊散射阈值,并进一步分析了光纤长度、衰减系数、数值孔径对...从受激布里渊散射耦合波导方程出发建立了多模光纤布里渊频移、泵浦波、斯托克斯波和声波场理论模型,分析对比了多模光纤与单模光纤布里渊散射谱的频移、增益、线宽和受激布里渊散射阈值,并进一步分析了光纤长度、衰减系数、数值孔径对多模光纤受激布里渊散射阈值的影响。结果表明,多模光纤多个模式布里渊散射谱叠加造成其总的布里渊散射谱展宽,不再满足洛伦兹分布,其线宽增加至原来数倍、峰值增益和频移降低;渐变折射率多模光纤SBS阈值一般在80 m W以上,远大于单模光纤;纤芯直径相同时,相比于阶跃折射率多模光纤,数值孔径对渐变折射率多模光纤SBS阈值的影响较大,后者更易发生受激布里渊散射效应。理论计算与已报道测量结果的比较验证了理论分析的正确性。文中研究为建立基于多模光纤的布里渊散射分布式传感系统奠定了理论基础。展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.41174131,41274151,41304123,41121003 and 41025016)
文摘A correction considering the effects of atmospheric temperature, pressure, and Mie contamination must be performed for wind retrieval from a Rayleigh Doppler lidar（RDL）, since the so-called Rayleigh response is directly related to the convolution of the optical transmission of the frequency discriminator and the Rayleigh–Brillouin spectrum of the molecular backscattering. Thus, real-time and on-site profiles of atmospheric pressure, temperature, and aerosols should be provided as inputs to the wind retrieval. Firstly, temperature profiles under 35 km and above the altitude are retrieved, respectively,from a high spectral resolution lidar（HSRL） and a Rayleigh integration lidar（RIL） incorporating to the RDL. Secondly,the pressure profile is taken from the European Center for Medium range Weather Forecast（ECMWF） analysis, while radiosonde data are not available. Thirdly, the Klett–Fernald algorithms are adopted to estimate the Mie and Rayleigh components in the atmospheric backscattering. After that, the backscattering ratio is finally determined in a nonlinear fitting of the transmission of the atmospheric backscattering through the Fabry–Perot interferometer（FPI） to a proposed model.In the validation experiments, wind profiles from the lidar show good agreement with the radiosonde in the overlapping altitude. Finally, a continuous wind observation shows the stability of the correction scheme.
文摘In this study, a hybrid algorithm combining genetic algorithm （GA） with back propagation （BP） neural network （GA-BP） was proposed for extracting the characteristics of multi-peak Brillouin scattering spectrum. Simulations and experimental results show that the GA-BP hybrid algorithm can accurately identify the position and amount of peaks in multi-peak Brillouin scattering spectrum. Moreover, the proposed algorithm obtains a fitting degree of 0.9923 and a mean square error of 0.0094. Therefore, the GA-BP hybrid algorithm possesses a good fitting precision and is suitable for extracting the characteristics of multi-peak Brillouin scattering spectrum.
文摘从受激布里渊散射耦合波导方程出发建立了多模光纤布里渊频移、泵浦波、斯托克斯波和声波场理论模型,分析对比了多模光纤与单模光纤布里渊散射谱的频移、增益、线宽和受激布里渊散射阈值,并进一步分析了光纤长度、衰减系数、数值孔径对多模光纤受激布里渊散射阈值的影响。结果表明,多模光纤多个模式布里渊散射谱叠加造成其总的布里渊散射谱展宽,不再满足洛伦兹分布,其线宽增加至原来数倍、峰值增益和频移降低;渐变折射率多模光纤SBS阈值一般在80 m W以上,远大于单模光纤;纤芯直径相同时,相比于阶跃折射率多模光纤,数值孔径对渐变折射率多模光纤SBS阈值的影响较大,后者更易发生受激布里渊散射效应。理论计算与已报道测量结果的比较验证了理论分析的正确性。文中研究为建立基于多模光纤的布里渊散射分布式传感系统奠定了理论基础。
