The experiments on the flash pyrolysis of a lignite were carried out in a fast-entrained bed reactor as a basic study on a so-called ＇ coal topping process＇. The investigation focused on the effects of pyrolysis tem...The experiments on the flash pyrolysis of a lignite were carried out in a fast-entrained bed reactor as a basic study on a so-called ＇ coal topping process＇. The investigation focused on the effects of pyrolysis temperature and coal particle size on the product distribution and composition. The experimental results show that an increase in the pyrolysis temperature results in a higher yield of gaseous products while a larger particle size leads to a decrease of the liquid yield. An optimum temperature for the liquid yield was found to be 650℃. A certain amount of phenol groups was found in the liquid products, which may be used to produce high-valued fine chemicals. The FTIR analyses of the coal and chars show that aliphatic structures in the chars are gradually replaced by aromatic structures with the increasing of pyrolysis temperature and coal particle size. The results of this study provide fundamental data and optimal conditions to maximize light oils yields for the coal topping process.展开更多
A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dime...A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dimensional full-loop circulating fluidized bed.Different particle systems,including one monodisperse and two polydisperse cases,were investigated.The numerical model was validated by comparing its results with the experimental axial voidage distribution and solid mass flux.The EMMS drag model had a high accuracy in the computational particle fluid-dynamics simulation of the three-dimensional full-loop circulating fluidized bed.The total number of parcels in the system(Np)influenced the axial voidage distribution in the riser,especially at the lower part of the riser.Additional numerical simulation results showed that axial segregation by size was predicted in the two polydisperse cases and the segregation size increased with an increase in the number of size classes.The axial voidage distribution at the lower portion of the riser was significantly influenced by particle-size distribution.However,radial segregation could only be correctly predicted in the upper region of the riser in the polydisperse case of three solid species.展开更多
Putting forth effort on analyzing the action of turbulent flow on the sand particles on rvier bed surface,in this paper, the interdependent relation between the size distribution of coarse sand bed load and flow stren...Putting forth effort on analyzing the action of turbulent flow on the sand particles on rvier bed surface,in this paper, the interdependent relation between the size distribution of coarse sand bed load and flow strength is studied.A theoretical calculation formula obtained gives good results in accordance with the field data.展开更多
The electrochemical behavior of Ti-6Al-4V with 1 mm and 16 mm thickness prepared by electron beam powder bed fusion(EB-PBF)was investigated in phosphate buffered saline.Electrochemical results showed that EB-PBF Ti-6A...The electrochemical behavior of Ti-6Al-4V with 1 mm and 16 mm thickness prepared by electron beam powder bed fusion(EB-PBF)was investigated in phosphate buffered saline.Electrochemical results showed that EB-PBF Ti-6Al-4V with a larger component size was more resistant to corrosion compared to the smaller component,because of less acicularαʹphase content and moreβphase content.As a non-equilibrium phase in the“high-energy state”,αʹphase has a greater susceptibility to corrode and reduces the corrosion resistance of the material,whileβphase improves corrosion resistance of titanium alloys.The results show that the phase composition has a more significant effect on the corrosion performance than the grain size.展开更多
Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion(PBF)process.In this study,a dynamic monitoring and feedback system of powder bed temperature fiel...Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion(PBF)process.In this study,a dynamic monitoring and feedback system of powder bed temperature field using an infrared thermal imager has been established and integrated into a four-laser PBF equipment with a working area of 2000 mm×2000 mm.The heat-affected zone(HAZ)temperature field has been controlled by adjusting the scanning speed dynamically.Simultaneously,the relationship among spot size,HAZ temperature,and part performance has been established.The fluctuation of the HAZ temperature in four-laser scanning areas was decreased from 30.85℃to 17.41℃.Thus,the consistency of the sintering performance of the produced large component has been improved.Based on the controllable temperature field,a dynamically adjusting strategy for laser spot size was proposed,by which the fabrication efficiency was improved up to 65.38%.The current research results were of great significance to the further industrial applications of large-scale PBF equipment.展开更多
文摘The experiments on the flash pyrolysis of a lignite were carried out in a fast-entrained bed reactor as a basic study on a so-called ＇ coal topping process＇. The investigation focused on the effects of pyrolysis temperature and coal particle size on the product distribution and composition. The experimental results show that an increase in the pyrolysis temperature results in a higher yield of gaseous products while a larger particle size leads to a decrease of the liquid yield. An optimum temperature for the liquid yield was found to be 650℃. A certain amount of phenol groups was found in the liquid products, which may be used to produce high-valued fine chemicals. The FTIR analyses of the coal and chars show that aliphatic structures in the chars are gradually replaced by aromatic structures with the increasing of pyrolysis temperature and coal particle size. The results of this study provide fundamental data and optimal conditions to maximize light oils yields for the coal topping process.
基金This work was financially supported by the National Natural Science Foundation of China through contract No.91634109 and No.51676158the National Key Research and Development Program of China(2016YFB0600102).
文摘A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dimensional full-loop circulating fluidized bed.Different particle systems,including one monodisperse and two polydisperse cases,were investigated.The numerical model was validated by comparing its results with the experimental axial voidage distribution and solid mass flux.The EMMS drag model had a high accuracy in the computational particle fluid-dynamics simulation of the three-dimensional full-loop circulating fluidized bed.The total number of parcels in the system(Np)influenced the axial voidage distribution in the riser,especially at the lower part of the riser.Additional numerical simulation results showed that axial segregation by size was predicted in the two polydisperse cases and the segregation size increased with an increase in the number of size classes.The axial voidage distribution at the lower portion of the riser was significantly influenced by particle-size distribution.However,radial segregation could only be correctly predicted in the upper region of the riser in the polydisperse case of three solid species.
文摘Putting forth effort on analyzing the action of turbulent flow on the sand particles on rvier bed surface,in this paper, the interdependent relation between the size distribution of coarse sand bed load and flow strength is studied.A theoretical calculation formula obtained gives good results in accordance with the field data.
基金This work was supported partially by the National Natural Science Foundation of China(U2241245)the CAS Interdisciplinary Innovation Team Project(JCTD-2020-10)of China+2 种基金the State Key Laboratory of Light Alloy Casting Technology for High-End Equipment(LACT-007)the Opening project of National Key Laboratory of Shock Wave and Detonation Physics(2022JCJQLB05702)the Original Fund of Nuclear Power Institute of China(kJCX-2022-YC2-20).
文摘The electrochemical behavior of Ti-6Al-4V with 1 mm and 16 mm thickness prepared by electron beam powder bed fusion(EB-PBF)was investigated in phosphate buffered saline.Electrochemical results showed that EB-PBF Ti-6Al-4V with a larger component size was more resistant to corrosion compared to the smaller component,because of less acicularαʹphase content and moreβphase content.As a non-equilibrium phase in the“high-energy state”,αʹphase has a greater susceptibility to corrode and reduces the corrosion resistance of the material,whileβphase improves corrosion resistance of titanium alloys.The results show that the phase composition has a more significant effect on the corrosion performance than the grain size.
基金Supported by National High Technology Research and Development Program of China(863 Program,Grant No.2015AA042503)K.C.Wong Education Foundation.
文摘Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion(PBF)process.In this study,a dynamic monitoring and feedback system of powder bed temperature field using an infrared thermal imager has been established and integrated into a four-laser PBF equipment with a working area of 2000 mm×2000 mm.The heat-affected zone(HAZ)temperature field has been controlled by adjusting the scanning speed dynamically.Simultaneously,the relationship among spot size,HAZ temperature,and part performance has been established.The fluctuation of the HAZ temperature in four-laser scanning areas was decreased from 30.85℃to 17.41℃.Thus,the consistency of the sintering performance of the produced large component has been improved.Based on the controllable temperature field,a dynamically adjusting strategy for laser spot size was proposed,by which the fabrication efficiency was improved up to 65.38%.The current research results were of great significance to the further industrial applications of large-scale PBF equipment.
