The nitrogen （N） pollution status of the 12 most important rivers in Changshu, Taihu Lake region was investigated. Water samples were collected from depths of 0.5-1.0 m with the aid of the global positioning system ...The nitrogen （N） pollution status of the 12 most important rivers in Changshu, Taihu Lake region was investigated. Water samples were collected from depths of 0.5-1.0 m with the aid of the global positioning system （GPS）. The seasonal variations in the concentrations of different N components in the rivers were measured. Using tension-free monolith lysimeters and ^15N-labeled fertilizer, field experiments were carried out in this region to determine variations of iSN abundance of NO3^- in the leachate during the rice and wheat growing seasons, respectively. Results showed that the main source of N pollution of surface waters in the Taihu Lake region was not the N fertilizer applied in the farmland but the urban domestic sewage and rural human and animal excreta directly discharged into the water bodies without treatment. Atmospheric dry and wet N deposition was another evident source of N pollutant of the surface waters. In conclusion, it would not be correct to attribute the N applied to farmlands as the source of N pollution of the surface waters in this region.展开更多
Objective： To observe wet cupping therapy（WCT） on local blood perfusion and analgesic effects in patients with nerve-root type cervical spondylosis（NT-CS）. Methods： Fifty-seven NT-CS patients were randomly divid...Objective： To observe wet cupping therapy（WCT） on local blood perfusion and analgesic effects in patients with nerve-root type cervical spondylosis（NT-CS）. Methods： Fifty-seven NT-CS patients were randomly divided into WCT group and Jiaji acupoint-acupuncture（JA） group according a random number table. WCT group（30 cases） was treated with WCT for 10 min, and JA group（27 cases） was treated with acupuncture for 10 min. The treatment efficacies were evaluated with a Visual Analogue Scale（VAS）. Blood perfusion at Dazhui（GV 14） and Jianjing（GB 21） acupoints（affected side） was observed with a laser speckle flowmetry, and its variations before and after treatment in both groups were compared as well. Results： In both groups, the VAS scores significantly decreased after the intervention（P〈0.01）, while the blood perfusion at the two acupoints significantly increased after intervention（P〈0.05）; however, the increasement magnitude caused by WCT was obvious compared with JA（P〈0.05）. Conclusion： WCT could improve analgesic effects in patients with NT-CS, which might be related to increasing local blood perfusion of acupunct points.展开更多
MnO2 in pyrolusite can react with SO2 in flue gas and obtain by-product MnSO4· H2O. A pilot scale jet bubbling reactor was applied in this work. Different factors affecting both SO2 absorption efficiency and Mn2^...MnO2 in pyrolusite can react with SO2 in flue gas and obtain by-product MnSO4· H2O. A pilot scale jet bubbling reactor was applied in this work. Different factors affecting both SO2 absorption efficiency and Mn2^＋ extraction rate have been investigated, these factors include temperature of inlet gas flue, ration of liquid/solid mass flow rate（ L/S）, pyrolusite grade, and SO2 concentration in the inlet flue gas. In the meantime, the procedure of purification of absorption liquid was also discussed. Experiment results indicated that the increase of temperature from 30 to 70 K caused the increase of SO2 absorption efficiency from 81.4% to 91.2%. And when SO2 concentration in the inlet flue gas increased from 500 to 3000 ppm, SO2 absorption efficiency and Mn2^＋ extraction rate decreased from 98.1% to 82.2% and from 82.8% to 61.7%, respectively. The content of MnO2 in pyrolusite had a neglectable effect on SO2, absorption efficiency. Low L/S was good for both removal of SO2 and Mn2^＋ extraction. The absorption liquid was filtrated and purified to remove Si, Mg, Ca, Fe, Al and heavy metals, last product MnSO4· H2O was obtained which quality could reach China GB1622-86, the industry grade standards.展开更多
Reduction of drag torque in disengaged wet clutch is one of important potentials for vehicle transmission improvement. The flow of the oil film in clutch clearance is investigated. A three-dimension Navier-Stokes(N-S)...Reduction of drag torque in disengaged wet clutch is one of important potentials for vehicle transmission improvement. The flow of the oil film in clutch clearance is investigated. A three-dimension Navier-Stokes(N-S) equation based on laminar flow is presented to model the drag torque. Pressure and speed distribution in radial and circumferential directions are deduced. The theoretical analysis reveals that oil flow acceleration in radial direction caused by centrifugal force is the key reason for the shrinking of oil film as constant feeding flow rate. The peak drag torque occurs at the beginning of oil film shrinking. A variable is introduced to describe effective oil film area and drag torque after oil film shrinking is well evaluated with the variable. Under the working condition, tests were made to obtain drag torque curves at different clutch speed and oil viscosity. The tests confirm that simulation results agree with test data. The model performs well in the prediction of drag torque and lays a theoretical foundation to reduce it.展开更多
Wet removal of NO from coal-fired flue gas by UV/H2O2 Advanced Oxidation Process (AOP) were investigated in a self-designed UV-bubble reactor. Several main influencing factors (UV intensity, H2O2 initial concentration...Wet removal of NO from coal-fired flue gas by UV/H2O2 Advanced Oxidation Process (AOP) were investigated in a self-designed UV-bubble reactor. Several main influencing factors (UV intensity, H2O2 initial concentration, initial pH value, solution temperature, NO initial concentration, liquid-gas ratio and O2 percentage content) on the NO removal efficiency were studied. The results showed that UV intensity, H2O2 initial concentration, NO initial concentration and liquid-gas ratio are the main influencing factors. In the best conditions, the highest NO removal efficiency by UV/H2O2 advanced oxidation process could reach 82.9%. Based on the experimental study, the influencing mechanism of the relevant influencing factors were discussed in depth.展开更多
Reduction of drag torque is one of important potentials to improve transmission efficiency.Existing mathematical model of drag torque was not accurate to predict the decrease after oil film shrinking because of the di...Reduction of drag torque is one of important potentials to improve transmission efficiency.Existing mathematical model of drag torque was not accurate to predict the decrease after oil film shrinking because of the difficulty in modeling the flow pattern between two plates.Flow pattern was considered as laminar flow and full oil film in the gap between two plates in traditional model.Subsequent equivalent circumferential degree model presented an improvement in oil film shrinking due to centrifugal force,but was also based on full oil film in the gap,which resulted difference between model prediction and experimental data.The objective of this paper is to develop an accurate mathematical model for the above problem by using experimental verification.An experimental apparatus was set up to test drag torque of disengaged wet clutch consisting of single friction and separate plate.A high speed camera was used to record the flow pattern through transparent quartz disk plate.The visualization of flow pattern in the clearance was investigated to evaluate the characteristics of oil film shrinking.Visual test results reveal that the oil film begins to shrink from outer radius to inner radius at the stationary plate and only flows along the rotating plate after shrinking.Meanwhile,drag torque decreases sharply due to little contact area between the stationary plate and the oil.A three-dimensional Navier-Stokes （N-S） equation based on laminar flow is presented to model the drag torque.Pressure distributions in radial and circumferential directions as well as speed distributions are deduced.The model analysis reveals that the acceleration of flow in radial direction caused by centrifugal force is the key reason for the shrinking at the constant feeding flow rate.An approach to descript flow pattern was presented on the basis of visual observation.The drag torque predicted by the model agrees well with test data for non-grooved wet clutch.The proposed model enhances the precision for predicting drag torque,and lays down 展开更多
Monthly data of Self-Calibrated Palmer Drought Severity Index (PDSI) from 1951 to 2000 are calculated using historical precipitation and temperature data for Chinese 160 stations. Temporal and spatial pat-terns of the...Monthly data of Self-Calibrated Palmer Drought Severity Index (PDSI) from 1951 to 2000 are calculated using historical precipitation and temperature data for Chinese 160 stations. Temporal and spatial pat-terns of the first empirical orthogonal function (EOF) of the PDSI reveals a fairly linear trend resulting from trends in precipitation and surface temperature, which is similar to the linear PDSI trend during 1951―2000 calculated using all monthly data. The EOF analysis also reveals that the leading mode correlates significantly with ENSO events in time and space. The ENSO EOF shows that during the typical warm phase of ENSO, surface conditions are drier in most regions of China, especially North China, but wetter than normal in the southern regions of Changjiang River, and Northwest China. During the typical cold phase of ENSO, these anomalies reverse sign. From 1951 to 2000, there are large multi-year to decadal variations in droughts and wet spells over China, which are all closely related to strong El Nio events. In other words, when one strong El Nio event happens, there is a possible big variability in droughts and wet spells over China on the multi-year or decadal scale. Studies also sug-gest that during the last 2―3 decades climate changes over China, especially North China's drying and northwest China's wetting, are closely related to the shift in ENSO towards warmer events and global warming since the late 1970s. The instability of the relationship is also studied. It is revealed that there is a good correlation between ENSO and Chinese variations in droughts and wet spells in the 3―8-year band, but the correlation between ENSO and Chinese variations in droughts and wet spells is instable. Studies suggest that there are decadal changes in the correlation: the wavelet coherency between ENSO and Chinese variations in droughts and wet spells is high during 1951―1962 and 1976―1991, but low during 1963―1975 and 1992―2000.展开更多
In this work, a scalable and cost-effective method including mechanical milling, centrifugation and spray drying was developed to fabricate Si nanoparticles.The synthesized Si nanoparticles show an average size of 62 ...In this work, a scalable and cost-effective method including mechanical milling, centrifugation and spray drying was developed to fabricate Si nanoparticles.The synthesized Si nanoparticles show an average size of 62 nm and exhibit a narrow particle size distribution. The influence of particle sizes on electrochemical performance of Si-based electrode was investigated, and it is found that as the particle size decreases in the studied range, the Si particles show a lower specific capacity and a higher irreversible capacity loss(ICL). Furthermore, an oxide layer with thickness of ～3 nm was detected on the surface of the as-received Si nanoparticles, and this layer can be effectively removed by hydrofluoric acid(HF) etching,resulting in much improved electrochemical performance over the as-received samples.展开更多
The influences of magnesium and ferric ions in their different ratios on the rate of gypsum crystallization were studied under the conditions similar to those of wet flue-gas desulfurization（WFGD）. The results show ...The influences of magnesium and ferric ions in their different ratios on the rate of gypsum crystallization were studied under the conditions similar to those of wet flue-gas desulfurization（WFGD）. The results show that addition of both Mg^2＋ and Fe^3＋ increased induction time and decreased the growth efficiency up to 50% compared with the baseline（without impurities） depending on the concentration and the type of impurity. The effects of Mg^2＋ and Fe^3＋ on the surface energy and the rate of nucleation were estimated by employing the classical nucleation theory. The surface energy decreased by 8% and 14% with the addition of 0.02 mol/L magnesium or ferric ions, respectively, compared to the baseline. Mg^2＋ and Fe^3＋ made the growth rate of the （020）, （021） and （040） faces of gypsum crystal a much greater reduction, which leads to the formation of needle crystals compared to the baseline which favors the formation of plate or flakes. Furthermore, an edge detection program was developed to quantify the effects of impurities on the filtration rate of gypsum product. The results show that the inhibition efficiency of the presence of 0.02 mol/L Mg^2＋ and Fe^3＋ on the filtration rate of gypsum crystal ranges from 22% to 39%.展开更多
With high hardness, high thermal and chemical stability and excellent optical performance, hard materials exhibit great potential applications in various fields, especially in harsh conditions. Femtosecond laser ablat...With high hardness, high thermal and chemical stability and excellent optical performance, hard materials exhibit great potential applications in various fields, especially in harsh conditions. Femtosecond laser ablation has the capability to fabricate three-dimensional micro/nanostructures in hard materials. However, the low efficiency, low precision and high surface roughness are the main stumbling blocks for femtosecond laser processing of hard materials. So far, etching- assisted femtosecond laser modification has demonstrated to be the efficient strategy to solve the above problems when processing hard materials, including wet etching and dry etching. In this review, femtosecond laser modification that would influence the etching selectivity is introduced. The fundamental and recent applications of the two kinds of etching assisted femtosecond laser modification technologies are summarized. In addition, the challenges and application prospects of these technologies are discussed.展开更多
This paper, using a revised Penman-Monteith model, computed the terrestrial surface humidity index of the Loess Plateau （China） based on climatic factors of monthly mean temperature, maximum temperature, minimum tem...This paper, using a revised Penman-Monteith model, computed the terrestrial surface humidity index of the Loess Plateau （China） based on climatic factors of monthly mean temperature, maximum temperature, minimum temperature, relative humidity, precipitation, wind speed and sunshine duration observed on the plateau from 1961 to 2008. The temporal-spatial distribution, anomaly distribution and sub-regional temporal variations of the terrestrial surface dry and wet conditions were analyzed as well. The results showed a decreasing trend in the annual average surface humidity from the southeast to the northwest in the research anna. Over the period of 1961-2008, an aridification tendency appeared sharply in the central interior region of the Loess Plateau, and less sharply in the middle part of the region. The border region showed the weakest tendency ol; aridification. It is clear that aridification diffused in all directions from the interior region. The spatial anomaly distribution of the terrestrial surface dry and wet conditions on the Loess Plateau can be divided into three key areas： the southern, western and eastern regions. The terrestrial annual humidity index displayed a significantly descending trend and showed remarkable abrupt changes from wet to dry in the years 1967, 1977 and 1979. In the above mentioned three key areas for dry and wet conditions, the terrestrial annual humidity index exhibited a fluctuation period of 3-4 years, while in the southern region, a fluctuation period of 7-8 years existed at the same time.展开更多
In order to have a good understanding of the behavior of wet shotcrete as a support element interacting with the rock mass,mechanism of wet shotcrete interacting with rock in support systems was analyzed through theor...In order to have a good understanding of the behavior of wet shotcrete as a support element interacting with the rock mass,mechanism of wet shotcrete interacting with rock in support systems was analyzed through theoretical,numerical study and analytical analysis.A new model of distribution of rock stress state after wet shotcrete was applied,which includes shotcrete layer,composite layer,strengthening layer,plastic layer and elastic layer,and a full illustration of the rock mass stress state was given after shotcrete interacting with rock mass.At the same time,numerical analysis with FLAC gives a stress distribution along the monitor line,respectively,at the sidewall and roof of the tunnel.The displacement obviously decreases with the depth of rock,the tangential stress for tunnel supported by shotcrete is lower than that without shotcrete,and radial stress for tunnel supported by shotcrete is higher than that without shotcrete.It has been demonstrated by AIRY'S stress function,which gives a reasonable solution.Finally,the application of wet shotcrete in Jinfeng Gold Mine shows that the displacement of tunnel decreases obviously in sidewall and roof.展开更多
基金Project supported by the State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences (No. 035109)the National Natural Science Foundation of China (No. 30390080).
文摘The nitrogen （N） pollution status of the 12 most important rivers in Changshu, Taihu Lake region was investigated. Water samples were collected from depths of 0.5-1.0 m with the aid of the global positioning system （GPS）. The seasonal variations in the concentrations of different N components in the rivers were measured. Using tension-free monolith lysimeters and ^15N-labeled fertilizer, field experiments were carried out in this region to determine variations of iSN abundance of NO3^- in the leachate during the rice and wheat growing seasons, respectively. Results showed that the main source of N pollution of surface waters in the Taihu Lake region was not the N fertilizer applied in the farmland but the urban domestic sewage and rural human and animal excreta directly discharged into the water bodies without treatment. Atmospheric dry and wet N deposition was another evident source of N pollutant of the surface waters. In conclusion, it would not be correct to attribute the N applied to farmlands as the source of N pollution of the surface waters in this region.
基金Supported by National Natural Science Foundation of China(No.81273673)Integrated Chinese and Western Medicine,Tianjin Health Bureau,China(No.11027)
文摘Objective： To observe wet cupping therapy（WCT） on local blood perfusion and analgesic effects in patients with nerve-root type cervical spondylosis（NT-CS）. Methods： Fifty-seven NT-CS patients were randomly divided into WCT group and Jiaji acupoint-acupuncture（JA） group according a random number table. WCT group（30 cases） was treated with WCT for 10 min, and JA group（27 cases） was treated with acupuncture for 10 min. The treatment efficacies were evaluated with a Visual Analogue Scale（VAS）. Blood perfusion at Dazhui（GV 14） and Jianjing（GB 21） acupoints（affected side） was observed with a laser speckle flowmetry, and its variations before and after treatment in both groups were compared as well. Results： In both groups, the VAS scores significantly decreased after the intervention（P〈0.01）, while the blood perfusion at the two acupoints significantly increased after intervention（P〈0.05）; however, the increasement magnitude caused by WCT was obvious compared with JA（P〈0.05）. Conclusion： WCT could improve analgesic effects in patients with NT-CS, which might be related to increasing local blood perfusion of acupunct points.
基金The Chinese Technology Department ( No. 85-912-04-01-02) the National Engineering Research Center for Flue Gas Desulfurization ( No.2001DC105003-1)
文摘MnO2 in pyrolusite can react with SO2 in flue gas and obtain by-product MnSO4· H2O. A pilot scale jet bubbling reactor was applied in this work. Different factors affecting both SO2 absorption efficiency and Mn2^＋ extraction rate have been investigated, these factors include temperature of inlet gas flue, ration of liquid/solid mass flow rate（ L/S）, pyrolusite grade, and SO2 concentration in the inlet flue gas. In the meantime, the procedure of purification of absorption liquid was also discussed. Experiment results indicated that the increase of temperature from 30 to 70 K caused the increase of SO2 absorption efficiency from 81.4% to 91.2%. And when SO2 concentration in the inlet flue gas increased from 500 to 3000 ppm, SO2 absorption efficiency and Mn2^＋ extraction rate decreased from 98.1% to 82.2% and from 82.8% to 61.7%, respectively. The content of MnO2 in pyrolusite had a neglectable effect on SO2, absorption efficiency. Low L/S was good for both removal of SO2 and Mn2^＋ extraction. The absorption liquid was filtrated and purified to remove Si, Mg, Ca, Fe, Al and heavy metals, last product MnSO4· H2O was obtained which quality could reach China GB1622-86, the industry grade standards.
基金supported by National Defense Arming Pre-researching Project(Grant No. 40402060102)
文摘Reduction of drag torque in disengaged wet clutch is one of important potentials for vehicle transmission improvement. The flow of the oil film in clutch clearance is investigated. A three-dimension Navier-Stokes(N-S) equation based on laminar flow is presented to model the drag torque. Pressure and speed distribution in radial and circumferential directions are deduced. The theoretical analysis reveals that oil flow acceleration in radial direction caused by centrifugal force is the key reason for the shrinking of oil film as constant feeding flow rate. The peak drag torque occurs at the beginning of oil film shrinking. A variable is introduced to describe effective oil film area and drag torque after oil film shrinking is well evaluated with the variable. Under the working condition, tests were made to obtain drag torque curves at different clutch speed and oil viscosity. The tests confirm that simulation results agree with test data. The model performs well in the prediction of drag torque and lays a theoretical foundation to reduce it.
基金supported by the National Natural Science Foundation of China (Grant No. 50721140649)
文摘Wet removal of NO from coal-fired flue gas by UV/H2O2 Advanced Oxidation Process (AOP) were investigated in a self-designed UV-bubble reactor. Several main influencing factors (UV intensity, H2O2 initial concentration, initial pH value, solution temperature, NO initial concentration, liquid-gas ratio and O2 percentage content) on the NO removal efficiency were studied. The results showed that UV intensity, H2O2 initial concentration, NO initial concentration and liquid-gas ratio are the main influencing factors. In the best conditions, the highest NO removal efficiency by UV/H2O2 advanced oxidation process could reach 82.9%. Based on the experimental study, the influencing mechanism of the relevant influencing factors were discussed in depth.
基金supported by National Defense Arming Pre-researching Project of China(Grant No.40402060102)
文摘Reduction of drag torque is one of important potentials to improve transmission efficiency.Existing mathematical model of drag torque was not accurate to predict the decrease after oil film shrinking because of the difficulty in modeling the flow pattern between two plates.Flow pattern was considered as laminar flow and full oil film in the gap between two plates in traditional model.Subsequent equivalent circumferential degree model presented an improvement in oil film shrinking due to centrifugal force,but was also based on full oil film in the gap,which resulted difference between model prediction and experimental data.The objective of this paper is to develop an accurate mathematical model for the above problem by using experimental verification.An experimental apparatus was set up to test drag torque of disengaged wet clutch consisting of single friction and separate plate.A high speed camera was used to record the flow pattern through transparent quartz disk plate.The visualization of flow pattern in the clearance was investigated to evaluate the characteristics of oil film shrinking.Visual test results reveal that the oil film begins to shrink from outer radius to inner radius at the stationary plate and only flows along the rotating plate after shrinking.Meanwhile,drag torque decreases sharply due to little contact area between the stationary plate and the oil.A three-dimensional Navier-Stokes （N-S） equation based on laminar flow is presented to model the drag torque.Pressure distributions in radial and circumferential directions as well as speed distributions are deduced.The model analysis reveals that the acceleration of flow in radial direction caused by centrifugal force is the key reason for the shrinking at the constant feeding flow rate.An approach to descript flow pattern was presented on the basis of visual observation.The drag torque predicted by the model agrees well with test data for non-grooved wet clutch.The proposed model enhances the precision for predicting drag torque,and lays down
基金Supported by the Key Program of the Chinese Academy of Sciences (Grant No. KZCX3-SW-221)the National Natural Science Foundation of China (Grant No. 40475037)
文摘Monthly data of Self-Calibrated Palmer Drought Severity Index (PDSI) from 1951 to 2000 are calculated using historical precipitation and temperature data for Chinese 160 stations. Temporal and spatial pat-terns of the first empirical orthogonal function (EOF) of the PDSI reveals a fairly linear trend resulting from trends in precipitation and surface temperature, which is similar to the linear PDSI trend during 1951―2000 calculated using all monthly data. The EOF analysis also reveals that the leading mode correlates significantly with ENSO events in time and space. The ENSO EOF shows that during the typical warm phase of ENSO, surface conditions are drier in most regions of China, especially North China, but wetter than normal in the southern regions of Changjiang River, and Northwest China. During the typical cold phase of ENSO, these anomalies reverse sign. From 1951 to 2000, there are large multi-year to decadal variations in droughts and wet spells over China, which are all closely related to strong El Nio events. In other words, when one strong El Nio event happens, there is a possible big variability in droughts and wet spells over China on the multi-year or decadal scale. Studies also sug-gest that during the last 2―3 decades climate changes over China, especially North China's drying and northwest China's wetting, are closely related to the shift in ENSO towards warmer events and global warming since the late 1970s. The instability of the relationship is also studied. It is revealed that there is a good correlation between ENSO and Chinese variations in droughts and wet spells in the 3―8-year band, but the correlation between ENSO and Chinese variations in droughts and wet spells is instable. Studies suggest that there are decadal changes in the correlation: the wavelet coherency between ENSO and Chinese variations in droughts and wet spells is high during 1951―1962 and 1976―1991, but low during 1963―1975 and 1992―2000.
基金financially supported by the National Natural Science Foundation of China (No. 51404030)the National Key Technologies Research and Development Program (No. 2016YFB0100400)+2 种基金the Natural Science Foundation of Beijing Municipality (No. 3154043)the Beijing Science and Technology Plan (No. Z151100000115015)the Beijing Nova Program (No. Z161100004916096)
文摘In this work, a scalable and cost-effective method including mechanical milling, centrifugation and spray drying was developed to fabricate Si nanoparticles.The synthesized Si nanoparticles show an average size of 62 nm and exhibit a narrow particle size distribution. The influence of particle sizes on electrochemical performance of Si-based electrode was investigated, and it is found that as the particle size decreases in the studied range, the Si particles show a lower specific capacity and a higher irreversible capacity loss(ICL). Furthermore, an oxide layer with thickness of ～3 nm was detected on the surface of the as-received Si nanoparticles, and this layer can be effectively removed by hydrofluoric acid(HF) etching,resulting in much improved electrochemical performance over the as-received samples.
基金Supported by the State 11.5 Support Plan(No.2006BAA01B04)the New Century Excellent Talent Support Plan of China (No.NCET-06-0513)
文摘The influences of magnesium and ferric ions in their different ratios on the rate of gypsum crystallization were studied under the conditions similar to those of wet flue-gas desulfurization（WFGD）. The results show that addition of both Mg^2＋ and Fe^3＋ increased induction time and decreased the growth efficiency up to 50% compared with the baseline（without impurities） depending on the concentration and the type of impurity. The effects of Mg^2＋ and Fe^3＋ on the surface energy and the rate of nucleation were estimated by employing the classical nucleation theory. The surface energy decreased by 8% and 14% with the addition of 0.02 mol/L magnesium or ferric ions, respectively, compared to the baseline. Mg^2＋ and Fe^3＋ made the growth rate of the （020）, （021） and （040） faces of gypsum crystal a much greater reduction, which leads to the formation of needle crystals compared to the baseline which favors the formation of plate or flakes. Furthermore, an edge detection program was developed to quantify the effects of impurities on the filtration rate of gypsum product. The results show that the inhibition efficiency of the presence of 0.02 mol/L Mg^2＋ and Fe^3＋ on the filtration rate of gypsum crystal ranges from 22% to 39%.
基金This work was supported by the National Key Research and Development Program of China and National Natural Science Foundation of China (NSFC) under Grants 2017YFB1104300,61590930,61825502,61805098 and 61960206003.
文摘With high hardness, high thermal and chemical stability and excellent optical performance, hard materials exhibit great potential applications in various fields, especially in harsh conditions. Femtosecond laser ablation has the capability to fabricate three-dimensional micro/nanostructures in hard materials. However, the low efficiency, low precision and high surface roughness are the main stumbling blocks for femtosecond laser processing of hard materials. So far, etching- assisted femtosecond laser modification has demonstrated to be the efficient strategy to solve the above problems when processing hard materials, including wet etching and dry etching. In this review, femtosecond laser modification that would influence the etching selectivity is introduced. The fundamental and recent applications of the two kinds of etching assisted femtosecond laser modification technologies are summarized. In addition, the challenges and application prospects of these technologies are discussed.
基金supported by the National Basic Research Program of China (2012CB955903,2012CB955304)the Special Fund for Public Welfare Industry(GYHY201106029,GYHY200806021)+2 种基金the National Natural Science Foundation of China (40830957)the China Meteorological Administration Special Program for Climatic Change(280200S011C00)the Drought Meteorology Science Research Program (IAM201111)
文摘This paper, using a revised Penman-Monteith model, computed the terrestrial surface humidity index of the Loess Plateau （China） based on climatic factors of monthly mean temperature, maximum temperature, minimum temperature, relative humidity, precipitation, wind speed and sunshine duration observed on the plateau from 1961 to 2008. The temporal-spatial distribution, anomaly distribution and sub-regional temporal variations of the terrestrial surface dry and wet conditions were analyzed as well. The results showed a decreasing trend in the annual average surface humidity from the southeast to the northwest in the research anna. Over the period of 1961-2008, an aridification tendency appeared sharply in the central interior region of the Loess Plateau, and less sharply in the middle part of the region. The border region showed the weakest tendency ol; aridification. It is clear that aridification diffused in all directions from the interior region. The spatial anomaly distribution of the terrestrial surface dry and wet conditions on the Loess Plateau can be divided into three key areas： the southern, western and eastern regions. The terrestrial annual humidity index displayed a significantly descending trend and showed remarkable abrupt changes from wet to dry in the years 1967, 1977 and 1979. In the above mentioned three key areas for dry and wet conditions, the terrestrial annual humidity index exhibited a fluctuation period of 3-4 years, while in the southern region, a fluctuation period of 7-8 years existed at the same time.
基金Project(50934002) supported by the National Natural Science Foundation of China
文摘In order to have a good understanding of the behavior of wet shotcrete as a support element interacting with the rock mass,mechanism of wet shotcrete interacting with rock in support systems was analyzed through theoretical,numerical study and analytical analysis.A new model of distribution of rock stress state after wet shotcrete was applied,which includes shotcrete layer,composite layer,strengthening layer,plastic layer and elastic layer,and a full illustration of the rock mass stress state was given after shotcrete interacting with rock mass.At the same time,numerical analysis with FLAC gives a stress distribution along the monitor line,respectively,at the sidewall and roof of the tunnel.The displacement obviously decreases with the depth of rock,the tangential stress for tunnel supported by shotcrete is lower than that without shotcrete,and radial stress for tunnel supported by shotcrete is higher than that without shotcrete.It has been demonstrated by AIRY'S stress function,which gives a reasonable solution.Finally,the application of wet shotcrete in Jinfeng Gold Mine shows that the displacement of tunnel decreases obviously in sidewall and roof.
