The coarse grain HAZ microstructure and property of X80 pipeline steel with different carbon content was investigated. The weld thermal simulation test was carried out on Gleeble 1500 thermal mechanical test machine. ...The coarse grain HAZ microstructure and property of X80 pipeline steel with different carbon content was investigated. The weld thermal simulation test was carried out on Gleeble 1500 thermal mechanical test machine. The Charpy tests were completed at --20 ℃ for evaluating the toughness of coarse grain heat affected zone （CGHAZ）. The microstructure was examined by optical microscope （OM） and transmission electron microscopy （TEM）, and the austenite constituent was quantified by X-ray diffraction. The results showed that the ultra-low carbon can improve the toughness of CGHAZ by suppressing the formation of carbide, decreasing the martensite austenite （M-A） constituent and increasing the residual austenite in the M A.展开更多
The research and trial production of X80 pipeline steel in Baosteel is briefly introduced in this paper. It is shown that the X80 pipeline steel with high toughness using acicular ferrite microstructure is designed by...The research and trial production of X80 pipeline steel in Baosteel is briefly introduced in this paper. It is shown that the X80 pipeline steel with high toughness using acicular ferrite microstructure is designed by ultra-low carbon, micro-alloying and Mo-low-alloying in the compositions, and can be produced by combining with the clean steel-making technology and thermal-mechanical controlled processing. The pipes made from the trial producing coils meet the requirements for grade X80 line pipe of the API spec.5L, and have high Charpy V-notch impact energy and good dynamic tear-resistance ability at low temperature. The X80 pipeline steel can be applied to the high-pressure transporting gas pipeline project.展开更多
The occurrence and development mechanism of internal local corrosion has always been a controversial topic,and especially under flow conditions.In this paper,an improved high shear force loop was experimentally used,a...The occurrence and development mechanism of internal local corrosion has always been a controversial topic,and especially under flow conditions.In this paper,an improved high shear force loop was experimentally used,and local flow field is induced by simulating corrosion defects on the surface of X80 pipeline steel specimens.The characteristics of corrosion products deposited on the surface of specimens in CO2-saturated NACE solution were investigated by means of electrochemical impedance spectroscopy(EIS),scanning electron microscopy(SEM),X-ray diffraction(XRD),and energy dispersive spectrometry(EDS).The 3D micromorphology of the corrosion test surface after remove the corrosion scale used to measure the size of localized corrosion pit.Under the influence of local defects,the wall shear stress(WSS)and turbulent kinetic energy of local flow fields enhanced significantly,and pressure fluctuations in local flow field were induced.The results showed that the characteristics of surface corrosion products varied with flow velocity.The corrosion scales formed in various regions of specimens with defects exhibited different surface micro-morphologies and chemical compositions.Overall,these data offer new perspectives for better understanding the mechanisms behind local corrosion.展开更多
为了研究焊接热输入对X80管线钢粗晶热影响区的组织及性能影响,采用热模拟技术,对不同焊接热输入下X80管线钢的力学性能与显微组织进行了研究和分析。研究结果表明,在不同热输入量下厚壁X80管线钢粗晶热影响区组织为板条贝氏体、粒状贝...为了研究焊接热输入对X80管线钢粗晶热影响区的组织及性能影响,采用热模拟技术,对不同焊接热输入下X80管线钢的力学性能与显微组织进行了研究和分析。研究结果表明,在不同热输入量下厚壁X80管线钢粗晶热影响区组织为板条贝氏体、粒状贝氏体及M-A岛组织。当热输入量小于25 k J/mm时,粗晶热影响区组织以贝氏体板条为主,冲击韧性最佳,但硬度较高;当热输入量在25 k J/mm时,试验钢粗晶热影响区组织为板条贝氏体与粒状贝氏体,冲击韧性较高,且硬度适中;随着热输入的增大,粗晶热影响区中的粒状贝氏体变得极为粗大,同时,M-A形态与分布发生急剧变化,粗晶热影响区出现严重软化,冲击韧性值明显下降。展开更多
文摘The coarse grain HAZ microstructure and property of X80 pipeline steel with different carbon content was investigated. The weld thermal simulation test was carried out on Gleeble 1500 thermal mechanical test machine. The Charpy tests were completed at --20 ℃ for evaluating the toughness of coarse grain heat affected zone （CGHAZ）. The microstructure was examined by optical microscope （OM） and transmission electron microscopy （TEM）, and the austenite constituent was quantified by X-ray diffraction. The results showed that the ultra-low carbon can improve the toughness of CGHAZ by suppressing the formation of carbide, decreasing the martensite austenite （M-A） constituent and increasing the residual austenite in the M A.
文摘The research and trial production of X80 pipeline steel in Baosteel is briefly introduced in this paper. It is shown that the X80 pipeline steel with high toughness using acicular ferrite microstructure is designed by ultra-low carbon, micro-alloying and Mo-low-alloying in the compositions, and can be produced by combining with the clean steel-making technology and thermal-mechanical controlled processing. The pipes made from the trial producing coils meet the requirements for grade X80 line pipe of the API spec.5L, and have high Charpy V-notch impact energy and good dynamic tear-resistance ability at low temperature. The X80 pipeline steel can be applied to the high-pressure transporting gas pipeline project.
基金supported by the National Natural Science Foundation of China with(No.51774314)Natural Science Foundation of Shandong Province with grant number(No.ZR2018MEM002)the Fundamental Research Funds for the Central Universities(No.19CX05001A)for financial support。
文摘The occurrence and development mechanism of internal local corrosion has always been a controversial topic,and especially under flow conditions.In this paper,an improved high shear force loop was experimentally used,and local flow field is induced by simulating corrosion defects on the surface of X80 pipeline steel specimens.The characteristics of corrosion products deposited on the surface of specimens in CO2-saturated NACE solution were investigated by means of electrochemical impedance spectroscopy(EIS),scanning electron microscopy(SEM),X-ray diffraction(XRD),and energy dispersive spectrometry(EDS).The 3D micromorphology of the corrosion test surface after remove the corrosion scale used to measure the size of localized corrosion pit.Under the influence of local defects,the wall shear stress(WSS)and turbulent kinetic energy of local flow fields enhanced significantly,and pressure fluctuations in local flow field were induced.The results showed that the characteristics of surface corrosion products varied with flow velocity.The corrosion scales formed in various regions of specimens with defects exhibited different surface micro-morphologies and chemical compositions.Overall,these data offer new perspectives for better understanding the mechanisms behind local corrosion.
文摘为了研究焊接热输入对X80管线钢粗晶热影响区的组织及性能影响,采用热模拟技术,对不同焊接热输入下X80管线钢的力学性能与显微组织进行了研究和分析。研究结果表明,在不同热输入量下厚壁X80管线钢粗晶热影响区组织为板条贝氏体、粒状贝氏体及M-A岛组织。当热输入量小于25 k J/mm时,粗晶热影响区组织以贝氏体板条为主,冲击韧性最佳,但硬度较高;当热输入量在25 k J/mm时,试验钢粗晶热影响区组织为板条贝氏体与粒状贝氏体,冲击韧性较高,且硬度适中;随着热输入的增大,粗晶热影响区中的粒状贝氏体变得极为粗大,同时,M-A形态与分布发生急剧变化,粗晶热影响区出现严重软化,冲击韧性值明显下降。
